S
Scooter
LoopBe1 - A Free Virtual MIDI Driver LoopBe1 is a virtual MIDI device
for transferring MIDI data between computer programs. Basically LoopBe1
is an \"invisible cable\" to connect a MIDI outport of an application to
any other application\'s MIDI inport. All MIDI data sent to the
program´s output is channeled to the receiving applications in realtime.
You may connect up to 8 applications to LoopBe\'s inport and up to 8
applications to the outport, all sending and receiving at the same time.
LoopBe1 is a native Windows 2k/XP WDM kernel mode driver, so expect the
lowest possible latency. Programs do not need to link with special
libraries, so LoopBe1 works with every MIDI or DirectMusic?-capable
application. A System Tray Icon to Mute MIDI LoopBe1 comes with a
Systray Icon. You can switch it on and off like a hardware device and
view its status. MIDI Feedback - Shortcut Detection Think of an
application opening in- and outport of LoopBe1 and connecting both ports
via MIDI through: you would get an infinite loop of MIDI data, circling
in realtime, which would seriously slow down the whole computer. As
modern MIDI applications may open several ports, this happens all too
easily. LoopBe1 has a powerful shortcut detection to avoid MIDI
feedback. If a feedback is detected, LoopBe1 will immediately mute its
port, interrupt the loop and popup a message. After disabling the
malicious MIDI through within your program you can easily enable LoopBe1
again at its systray icon. LoopBe1 is free for non-commercial, personal
use only.
http://www.nerds.de/en/loopbe1.html
for transferring MIDI data between computer programs. Basically LoopBe1
is an \"invisible cable\" to connect a MIDI outport of an application to
any other application\'s MIDI inport. All MIDI data sent to the
program´s output is channeled to the receiving applications in realtime.
You may connect up to 8 applications to LoopBe\'s inport and up to 8
applications to the outport, all sending and receiving at the same time.
LoopBe1 is a native Windows 2k/XP WDM kernel mode driver, so expect the
lowest possible latency. Programs do not need to link with special
libraries, so LoopBe1 works with every MIDI or DirectMusic?-capable
application. A System Tray Icon to Mute MIDI LoopBe1 comes with a
Systray Icon. You can switch it on and off like a hardware device and
view its status. MIDI Feedback - Shortcut Detection Think of an
application opening in- and outport of LoopBe1 and connecting both ports
via MIDI through: you would get an infinite loop of MIDI data, circling
in realtime, which would seriously slow down the whole computer. As
modern MIDI applications may open several ports, this happens all too
easily. LoopBe1 has a powerful shortcut detection to avoid MIDI
feedback. If a feedback is detected, LoopBe1 will immediately mute its
port, interrupt the loop and popup a message. After disabling the
malicious MIDI through within your program you can easily enable LoopBe1
again at its systray icon. LoopBe1 is free for non-commercial, personal
use only.
http://www.nerds.de/en/loopbe1.html