Internet Explorer will not load some webpages

[Guest]

Since our upgrade to SP2 here at my place of work, there are a couple of
websites that either load and say done, but are blank....or they will just
sit there and try and load all day. I know it is related to IE6 SP2 as our
machines with IE 6 SP1 will bring up the pages just fine. We get no error
codes, just a lot of aggravation from not being able to view some webpages.
I have ruled out caching server as I have bypassed it for troubleshooting
purposes. Please help....I am out of things to turn off and allow in IE.

 

[Front Desk]

Same here Jame. See my post , 11/18 2:54pm. We are not the only ones
suffering......I see posts concerning this at other groups too. Why can't
anyone help us out? Evidently, somewhere on our systems there is a setting
that must be adjusted...but what and where? For me also, after SP2 was
installed, I could not access HOTMAIL and certain other web
sites....affecting my computer at work. My home computer is not a problem
( I have resisted installing SP2 there). So, here we sit, annoyed and
frustrated . PLEASE, Microsoft, we need your help !!!!!!!!!!
Eileen

 

[Jan Il]

Hi Jame

Try the following and see if it helps:

Go to "Start" -> "Run" -> and register the following dll's by using
regsvr32 command. Try the first 2, then see if it resolves the problem. If
not then register the rest of the .dll's:

regsvr32 urlmon.dll?
regsvr32 actxprxy.dll
regsvr32 scrrun.dll?
regsvr32 msxml.dll?
regsvr32 mshtml.dll?
regsvr32 shdocvw.dll?
regsvr32 browseui.dll
regsvr32 msjava.dll?

If that doesn't work, then check out the following article and do the
additional steps outlined
there:

You Cannot Open New Internet Explorer Window or Nothing Happens After You
Click a Link
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q281679

BUG: Microsoft Internet Explorer Displays a Blank Page While It Uses an HTTP
1.0 Request in a WinInet Application
http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q816405

HTML pages only partly appear, HTML pages do not appear or network stops
responding
http://support.microsoft.com/?kbid=823386

Internet Explorer Displays a Blank Page and May Appear to Stop Responding on
Windows 2000
http://support.microsoft.com/?kbid=832624

or................

Blank Pages - Windows
http://inetexplorer.mvps.org/answers2.htm#blank_windows

or.....................

See this article:
http://www.mvps.org/inetexplorer/answers.htm#new_window

If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE_Default_Browser.reg

You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for WinXP).
Type oleaut32.dll, not worrying about its location. Then, click Start.

Next to 'Restore From', type in or browse for the file's location, which is
probably in the Win98 (i386 for WinXP) folder of your installation CD-ROM
(typically D:\Win98), or in your Windows\Options\Cabs (Windows\i386 for
WinXP) folder, as the case may be.

Then, next to 'Save File In', enter C:\Windows\System (C:\Windows\System32
for WinXP), and click OK. System File Checker (or msconfig) looks for the
file, saves it as you requested, and then tells you that 'the file has been
successfully extracted'.

You may need to reboot.

or............................

Reset security level to default "medium"

If these steps do not resolve your problem, please post back to this thread
with the details and any error messages.

Hope this helps

Jan
Smiles are meant to be shared,
that's why they're so contagious.

Please reply to the newsgroup so others may benefit.
Replies are posted only to the newsgroup for the benefit or other readers.

How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm