Installing two types of VPN Clients.

[Guest]

I have two VPN software applications, I can not have the two of them
installed at the same time, only individually, therefore uninstalling one,
and installing the other when needed.

Do you know of a way to setup it up under windows so that I can design
WinXP/2K to login with various userid’s so that one of the other software
package is loaded. Or do you know how to have two of the applications
installed (not running) at the same time.

On the USERID front, I would like to be able to:

1. At the login prompt have a USERID setup for VPN1 and one for VPN2.

2. If I select VPN1 userid once logged in, I would/could run the VPN client.

3. If I need the VPN2 client, I would just logout (not reboot) and login
with the VPN2 id

Installing the software on separate drives of the PC, I believe won’t work
due to the drivers and reg information stored by the two of them – therefore
I don’t know if have two applications together will work.

Make sense or clear as mud - J

Any thoughts, suggestions...

 

[pcbutts1]

No not that I know of. They both use the same nic, each client configures it
differently. There may be a work around but I need to know which VPN clients
you are using.

--


The best live web video on the internet http://www.seedsv.com/webdemo.htm
NEW Embedded system W/Linux. We now sell DVR cards.
See it all at http://www.seedsv.com/products.htm
Sharpvision simply the best http://www.seedsv.com

 

[Guest]

I am using Cisco and Nortel VPN

No not that I know of. They both use the same nic, each client configures it
differently. There may be a work around but I need to know which VPN clients
you are using.

--


The best live web video on the internet http://www.seedsv.com/webdemo.htm
NEW Embedded system W/Linux. We now sell DVR cards.
See it all at http://www.seedsv.com/products.htm
Sharpvision simply the best http://www.seedsv.com