Follow this procedure for installation:
The Windows XP CD is bootable and contains all the tools necessary
to partition and format your drive. Follow this procedure and allow
Windows XP to partition and format your drive:
NOTE: It would be best to physically disconnect all your peripheral hardware
devices, except the monitor, mouse and keyboard, before installing XP.
1. Open your BIOS and set your "CD Drive as the first bootable device".
===> Accessing Motherboard BIOS
===>
http://www.michaelstevenstech.com/bios_manufacturer.htm
2. Insert your Windows XP CD in the CD Drive and reboot your computer.
3. You'll see a message to boot to the CD....follow the instructions.
4. The setup menu will appear and you should elect to delete the existing
Windows partitions, then create a new partition, then format the primary
partition (preferably NTFS) and proceed to install Windows XP.
5. Clean Install Windows XP
http://michaelstevenstech.com/cleanxpinstall.html
[Courtesy of Michael Stevens, MS-MVP]
6. After Windows XP is installed, visit the Windows Update website
and download the available "Critical Updates".
7. After installing the critical updates, be sure and visit the support website
of the manufacturer of the computer to download and install any
available Windows XP compatible drivers, such as video adapter
and audio drivers.
8. If you happen to run into any installation difficulties, use the following resources:
How to Troubleshoot Windows XP Problems During Installation
http://support.microsoft.com/default.aspx?scid=kb;EN-US;310064
Troubleshooting Windows XP Setup
http://www.kellys-korner-xp.com/xp_setup.htm
[Courtesy of MS-MVP Kelly Theriot]
--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User
Be Smart! Protect your PC!
http://www.microsoft.com/security/protect/
---------------------------------------------------------------------------
|I am having a problem getting Windows XP Pro. to install
| on my computer. I am currently running 2000 Pro on a Dell
| Lattitude CPi A366XT with 64 MB of RAM. Everything is
| working fine with the 2000 pro. When I put the XP
| installation disc in the CD ROM spins and stops
| continually. The autorun acknowledges the disc and opens
| to the menu. When I click on "install XP" my ROM drive
| starts and stops repeatedly but doesn't load anything.
| I've updated my BIOS to current and updated my CD ROM
| driver so far but no change. Any ideas why this is
| happening?? Thanks.
