How to set the speed of network card automatically

G

Guest

I use the sysprep procedure to install and configure Windows XP Professional.
I want to know with which parameters and in which section in the sysprep.inf
file must I specify to set the speed of network card ?
Thanks for your support,
Job
 
M

Mike Hall

NIC's set their own speed.. eg. if a 10/100mb card is connected to a 10mb
hub, it will connect at 10mb regardless..

Mike Hall
 
G

Guest

It is not my case and I want to set the speed for network performance.
My question is still open, how to set the speed automatically to 100Mb/Full
Duplex.
Thanks for your next responses,
Job
 
M

Mike Hall

A 10/100mb network card will automatically connect at full speed as long as
what it connects to is also working at 100mb..
 
G

Guest

My question was to set automatically with the sysprep procedure and not
manually.
The question is still open,
Job
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Which parameters to set the speed network card 1
Sysprep doesn't find drivers? 5
Zero Upload Speed 6
Sysprep operation with and without the -mini option 1
sysprep / mass storage / imaging 0
Network Card Speed 2
sysprep & networking components 1
After loading a Ghost Image onto a different computer, it reboots over and over 1

Top