I recieved a message saying my radeon card is conflicting with my on board vidio card and that I should go to the bios and disable the on board card How do I get into the bios?????
The manual for your motherboard should tell you, but when turn the PC on,
have a look at the bottom of the screen for a message like 'Press X to enter
setup' - where X could be Del, F2, F3 etc.
--
Will Denny
MS-MVP Windows - Shell/User
Please reply to the News Groups
| I recieved a message saying my radeon card is conflicting with my on board
vidio card and that I should go to the bios and disable the on board card
How do I get into the bios?????
vidio card and that I should go to the bios and disable the on board card
How do I get into the bios?????
Your PC documentation should have that for you.
If when during the booting process, do you see on the screen before getting
to the XP splash screen where it says "F2 for Setup" etc.
If you see where it says to strike a certain key for "setup", that is the
one for the BIOS. But to be honest, if you don't already know how, and
unless you know what you are doing in the BIOS, I would recommend getting
someone else that does know before making any changes there that may damage
your BIOS.
Most likely entering the bios would be done by pressing delete immediately
after the computer turns on . Scroll down the various pages using the
direction keys indicated at the bottom of the first page till you locate
the onboard video , enable / disable. Most likely plus or minus will make
the changes. follow closing instructions and exit bios. This should be close
to what you have to do , but bios have different manufactures. Reading the
bios instruction in your handbook will be more exact . Jym
Brian Smithers said:
I recieved a message saying my radeon card is conflicting with my on board
Try the following site for information for accessing different
manufacturers' BIOS; http://www.michaelstevenstech.com/bios_manufacturer.htm
When you get in, look for "integrated" section, and disable onboard video,
and exit BIOS saving changes made. Good Luck.
Willie
phil said:
on most computers all you have to do is press 'DEL' at startup. sometime
you cannot tell when to do this so its best to just continuelsy press
'delete' as soon as you turn your PC on. A Blue (-normaly blue) screen
should apper, this is the bios. dont worry continuslay pressing delete wont
do any harm.board vidio card and that I should go to the bios and disable the on board
card How do I get into the bios?????
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.