Home website changes in registry

S

Shahid

Some addware has made changes in my registry and made an
annoying website as home page which is not going away.
Where in registry these changes are made and how can I get
rid of them and make some other website of my choice as my
home page.
Thanks
Shahid
 
J

Jim Byrd

Hi Shahid - Sounds like this might be a variant of some malware called
CoolWebSearch (if not, then see AdAware, SpyBot, and HijackThis, below). Do
the following:

Download, UPDATE before running, and run:
http://209.133.47.200/~merijn/files/CWShredder.exe to remove the parasite.
Be sure to close all instances of IE and OE. You may also get it here if
that link is blocked: http://www.zerosrealm.com/downloads/CWShredder.zip

You will need to show Hidden files first and then at the end disable System
Restore and then reboot your system in order to clear the malware garbage
from the backups after you've cleaned up. It's best to perform CWShredder
(and most other malware fixers too) from Safe mode and then reboot. After
cleaning things up, then you can disable and then re-enable System Restore.
See ******** below.

The following links give instructions on how to do these various functions:


HOW TO Restart in Safe Mode
<http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2001052409420406>

HOW TO Enable Hidden Files
<http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2002092715262339>

HOW TO Disable/Flush System Restore (do this at the end AFTER cleaning)
<http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2001111912274039>
(WinXP)
<http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2001012513122239>
(WinME)



Then download and run:
http://www.kellys-korner-xp.com/regs_edits/iegentabs.reg to restore your
tabs and remove any restrictions that the parasite has put in place.

Be sure that you also download and install hotfix Q816093, here:

http://support.microsoft.com/?kbid=816093#appliesto

which blocks the exploit upon which this parasite family depends.

Now download and run:
http://www.kellys-korner-xp.com/regs_edits/RestoreSearch2.REG to restore
your search functions.


However, this also indicates that you may have acquired some other malware
along the way. If you go to this page at Jim Eshelman's site, here:
http://aumha.org/a/noads.htm and wait a little bit (be patient), an analysis
of a number of possible parasites on your machine will be made to help you
identify and remove them. NOTE: You will need to disable Ad Blocking in Zone
Alarm 3.x, if present or any other Ad Blocking software which interferes
with Java Scripting for this scan to work. You should get a message between
the two lines of **** giving the results of the scan.

Get Ad-Aware 6.0, Build 181 or later, here:
http://www.lavasoftusa.com/support/download/. UPDATE and run this regularly
to get rid of most "spyware/hijackware" on your machine. If it has to fix
things, be sure to re-boot and rerun AdAware again and repeat this cycle
until you get a clean scan. The reason is that it may have to remove
things which are currently "in use" before it can then clean up others.

Another excellent program for this purpose is SpyBot Search and Destroy
available here: http://security.kolla.de/ SpyBot Support Forum here:
http://www.net-integration.net/cgi-bin/forums/ikonboard.cgi. I recommend
using both normally. After UPDATING and fixing things with SpyBot S&D, be
sure to re-boot and rerun SpyBot again and repeat this cycle until you get a
clean "no red" scan. The reason is that SpyBot sometimes has to remove
things which are currently "in use" before it can then clean up others.

Note that sometimes you need to make a judgement call about what these
programs report as spyware. See here, for example:
http://www.imilly.com/alexa.htm



If they don't fix it then start here:

Download HijackThis, free, here:
http://209.133.47.200/~merijn/files/HijackThis.exe (Always download a new
fresh copy of HijackThis [and CWShredder also] - It's UPDATED frequently.)
You may also get it here if that link is blocked:
http://www.majorgeeks.com/downloadget.php?id=3155&file=3&evp=3304750663b552982a8baee6434cfc13

In Windows Explorer, click on Tools|Folder Options|View and check "Show
hidden files and folders" and uncheck "Hide protected operating system
files". (You may want to restore these when you're all finished with
HijackThis.)

Unzip the downloaded HijackThis to any convenient folder, start it then
press Scan. Click on SaveLog when it's finished which will create
hijackthis.log. Now click the Config button, then Misc Tools and click on
Generate StartupList.log which will create Startuplist.txt

Then go to one of the following forums:

Spyware and Hijackware Removal Support, here:
http://216.180.233.162/~swicom/forums/

or Net-Integration here:
http://www.net-integration.net/cgi-...86d536d57b5f65b6e40c55365e;act=ST;f=27;t=6949

or Tom Coyote here: http://forums.tomcoyote.org/index.php?act=idx

Sign in, then copy and paste both files into a message asking for
assistance, Someone will answer with detailed instructions for the removal
of your parasite(s).


*******
ONLY IF you've successfully eliminated the malware, you can now make a new,
clean Restore Point and delete any previously saved (possibly infected)
ones. The following suggested approach is courtesy of Gary Woodruff, MVP:
For XP you can run a Disk Cleanup cycle and then look in the More Options
tab. The System Restore option removes all but the latest Restore Point. If
there hasn't been one made since the system was cleaned you should manually
create one before dumping the old possibly infected ones.
*******


Once you get this cleaned up, you might want to consider installing the
SpywareBlaster and SpywareGuard here to help prevent this kind of thing from
happening in the future:

http://www.javacoolsoftware.com/spywareblaster.html (Prevents malware Active
X installs) (BTW, SpyWare Blaster is not memory resident ... no CPU or
memory load - but keep it UPDATED) The latest version as of this writing
will prevent installation or prevent the malware from running if it is
already installed, and it provides information and fixit-links for a variety
of parasites.

http://www.javacoolsoftware.com/spywareguard.html (Monitors for attempts to
install malware) Keep it UPDATED. Both Very Highly Recommended

--
Please respond in the same thread.
Regards, Jim Byrd, MS-MVP



In
 
J

Jim Byrd

Hi Shahid - Sounds like this might be a variant of some malware called
CoolWebSearch (if not, then see AdAware, SpyBot, and HijackThis, below). Do
the following:

Download, UPDATE before running, and run:
http://209.133.47.200/~merijn/files/CWShredder.exe to remove the parasite.
Be sure to close all instances of IE and OE. You may also get it here if
that link is blocked: http://www.zerosrealm.com/downloads/CWShredder.zip

You will need to show Hidden files first and then at the end disable System
Restore and then reboot your system in order to clear the malware garbage
from the backups after you've cleaned up. It's best to perform CWShredder
(and most other malware fixers too) from Safe mode and then reboot. After
cleaning things up, then you can disable and then re-enable System Restore.
See ******** below.

The following links give instructions on how to do these various functions:


HOW TO Restart in Safe Mode
<http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2001052409420406>

HOW TO Enable Hidden Files
<http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2002092715262339>

HOW TO Disable/Flush System Restore (do this at the end AFTER cleaning)
<http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2001111912274039>
(WinXP)
<http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2001012513122239>
(WinME)



Then download and run:
http://www.kellys-korner-xp.com/regs_edits/iegentabs.reg to restore your
tabs and remove any restrictions that the parasite has put in place.

Be sure that you also download and install hotfix Q816093, here:

http://support.microsoft.com/?kbid=816093#appliesto

which blocks the exploit upon which this parasite family depends.

Now download and run:
http://www.kellys-korner-xp.com/regs_edits/RestoreSearch2.REG to restore
your search functions.


However, this also indicates that you may have acquired some other malware
along the way. If you go to this page at Jim Eshelman's site, here:
http://aumha.org/a/noads.htm and wait a little bit (be patient), an analysis
of a number of possible parasites on your machine will be made to help you
identify and remove them. NOTE: You will need to disable Ad Blocking in Zone
Alarm 3.x, if present or any other Ad Blocking software which interferes
with Java Scripting for this scan to work. You should get a message between
the two lines of **** giving the results of the scan.

Get Ad-Aware 6.0, Build 181 or later, here:
http://www.lavasoftusa.com/support/download/. UPDATE and run this regularly
to get rid of most "spyware/hijackware" on your machine. If it has to fix
things, be sure to re-boot and rerun AdAware again and repeat this cycle
until you get a clean scan. The reason is that it may have to remove
things which are currently "in use" before it can then clean up others.

Another excellent program for this purpose is SpyBot Search and Destroy
available here: http://security.kolla.de/ SpyBot Support Forum here:
http://www.net-integration.net/cgi-bin/forums/ikonboard.cgi. I recommend
using both normally. After UPDATING and fixing things with SpyBot S&D, be
sure to re-boot and rerun SpyBot again and repeat this cycle until you get a
clean "no red" scan. The reason is that SpyBot sometimes has to remove
things which are currently "in use" before it can then clean up others.

Note that sometimes you need to make a judgement call about what these
programs report as spyware. See here, for example:
http://www.imilly.com/alexa.htm



If they don't fix it then start here:

Download HijackThis, free, here:
http://209.133.47.200/~merijn/files/HijackThis.exe (Always download a new
fresh copy of HijackThis [and CWShredder also] - It's UPDATED frequently.)
You may also get it here if that link is blocked:
http://www.majorgeeks.com/downloadget.php?id=3155&file=3&evp=3304750663b552982a8baee6434cfc13

In Windows Explorer, click on Tools|Folder Options|View and check "Show
hidden files and folders" and uncheck "Hide protected operating system
files". (You may want to restore these when you're all finished with
HijackThis.)

Unzip the downloaded HijackThis to any convenient folder, start it then
press Scan. Click on SaveLog when it's finished which will create
hijackthis.log. Now click the Config button, then Misc Tools and click on
Generate StartupList.log which will create Startuplist.txt

Then go to one of the following forums:

Spyware and Hijackware Removal Support, here:
http://216.180.233.162/~swicom/forums/

or Net-Integration here:
http://www.net-integration.net/cgi-...86d536d57b5f65b6e40c55365e;act=ST;f=27;t=6949

or Tom Coyote here: http://forums.tomcoyote.org/index.php?act=idx

Sign in, then copy and paste both files into a message asking for
assistance, Someone will answer with detailed instructions for the removal
of your parasite(s).


*******
ONLY IF you've successfully eliminated the malware, you can now make a new,
clean Restore Point and delete any previously saved (possibly infected)
ones. The following suggested approach is courtesy of Gary Woodruff, MVP:
For XP you can run a Disk Cleanup cycle and then look in the More Options
tab. The System Restore option removes all but the latest Restore Point. If
there hasn't been one made since the system was cleaned you should manually
create one before dumping the old possibly infected ones.
*******


Once you get this cleaned up, you might want to consider installing the
SpywareBlaster and SpywareGuard here to help prevent this kind of thing from
happening in the future:

http://www.javacoolsoftware.com/spywareblaster.html (Prevents malware Active
X installs) (BTW, SpyWare Blaster is not memory resident ... no CPU or
memory load - but keep it UPDATED) The latest version as of this writing
will prevent installation or prevent the malware from running if it is
already installed, and it provides information and fixit-links for a variety
of parasites.

http://www.javacoolsoftware.com/spywareguard.html (Monitors for attempts to
install malware) Keep it UPDATED. Both Very Highly Recommended

--
Please respond in the same thread.
Regards, Jim Byrd, MS-MVP



In
 
J

Jim Byrd

YW, Shahid - Glad you got it fixed. Don't forget to install the patch to
help prevent CWS infection in the future. Note that this symptom often
indicates the possibility of other malware. You might want go to this page
at Jim Eshelman's site, here: http://aumha.org/a/noads.htm and wait a
little bit (be patient), while an analysis of a number of possible parasites
on your machine will be made to help you identify and remove them. NOTE:
You will need to disable Ad Blocking in Zone Alarm 3.x, if present or any
other Ad Blocking software which interferes with Java Scripting for this
scan to work. You should get a message between the two lines of **** giving
the results of the scan.

For the general hijack case, the best way to start is to get Ad-Aware 6.0,
Build 181 or later, here: http://www.lavasoftusa.com/support/download/.
UPDATE and run this regularly to get rid of most "spyware/hijackware" on
your machine. If it has to fix things, be sure to re-boot and rerun
AdAware again and repeat this cycle until you get a clean scan. The reason
is that it may have to remove things which are currently "in use" before it
can then clean up others.

Another excellent program for this purpose is SpyBot Search and Destroy
available here: http://security.kolla.de/ SpyBot Support Forum here:
http://www.net-integration.net/cgi-bin/forums/ikonboard.cgi. I recommend
using both normally. After UPDATING and fixing things with SpyBot S&D, be
sure to re-boot and rerun SpyBot again and repeat this cycle until you get a
clean "no red" scan. The reason is that SpyBot sometimes has to remove
things which are currently "in use" before it can then clean up others.


Note that sometimes you need to make a judgement call about what these
programs report as spyware. See here, for example:
http://www.imilly.com/alexa.htm


As I said before, now that you've gotten things cleaned up, you might want
to consider installing the SpywareBlaster and SpywareGuard here to help
prevent this kind of thing from happening in the future:
http://www.javacoolsoftware.com/spywareblaster.html (Prevents malware Active
X installs) (BTW, SpyWare Blaster is not memory resident ... no CPU or
memory load - but keep it UPDATED) The latest version as of this writing
will prevent installation or prevent the malware from running if it is
already installed, and it provides information and fixit-links for a variety
of parasites.
http://www.javacoolsoftware.com/spywareguard.html (Monitors for attempts to
install malware) Keep it UPDATED. Both Very Highly Recommended.

--
Please respond in the same thread.
Regards, Jim Byrd, MS-MVP



In
 
J

Jim Byrd

YW, Shahid - Glad you got it fixed. Don't forget to install the patch to
help prevent CWS infection in the future. Note that this symptom often
indicates the possibility of other malware. You might want go to this page
at Jim Eshelman's site, here: http://aumha.org/a/noads.htm and wait a
little bit (be patient), while an analysis of a number of possible parasites
on your machine will be made to help you identify and remove them. NOTE:
You will need to disable Ad Blocking in Zone Alarm 3.x, if present or any
other Ad Blocking software which interferes with Java Scripting for this
scan to work. You should get a message between the two lines of **** giving
the results of the scan.

For the general hijack case, the best way to start is to get Ad-Aware 6.0,
Build 181 or later, here: http://www.lavasoftusa.com/support/download/.
UPDATE and run this regularly to get rid of most "spyware/hijackware" on
your machine. If it has to fix things, be sure to re-boot and rerun
AdAware again and repeat this cycle until you get a clean scan. The reason
is that it may have to remove things which are currently "in use" before it
can then clean up others.

Another excellent program for this purpose is SpyBot Search and Destroy
available here: http://security.kolla.de/ SpyBot Support Forum here:
http://www.net-integration.net/cgi-bin/forums/ikonboard.cgi. I recommend
using both normally. After UPDATING and fixing things with SpyBot S&D, be
sure to re-boot and rerun SpyBot again and repeat this cycle until you get a
clean "no red" scan. The reason is that SpyBot sometimes has to remove
things which are currently "in use" before it can then clean up others.


Note that sometimes you need to make a judgement call about what these
programs report as spyware. See here, for example:
http://www.imilly.com/alexa.htm


As I said before, now that you've gotten things cleaned up, you might want
to consider installing the SpywareBlaster and SpywareGuard here to help
prevent this kind of thing from happening in the future:
http://www.javacoolsoftware.com/spywareblaster.html (Prevents malware Active
X installs) (BTW, SpyWare Blaster is not memory resident ... no CPU or
memory load - but keep it UPDATED) The latest version as of this writing
will prevent installation or prevent the malware from running if it is
already installed, and it provides information and fixit-links for a variety
of parasites.
http://www.javacoolsoftware.com/spywareguard.html (Monitors for attempts to
install malware) Keep it UPDATED. Both Very Highly Recommended.

--
Please respond in the same thread.
Regards, Jim Byrd, MS-MVP



In
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top