HELP RRAS configuration

[Guest]

Anyone who could help me out.I've installed RRAS for dial-up. i was able to dial-in to the server and the server accepts the computer that dialed in.in the mobile unit i cannot access the resources of the LAN. any help would very much be appreciated thanks.

 

[Pawan Agarwal \(MSFT\)]

Look at troubleshooter there:
http://www.microsoft.com/windows200...=/windows2000/en/server/help/sag_VPN_tr03.htm

--
-Pawan [MSFT]

-------------------------------------------------------------------------
"This posting is provided "AS IS" with no warranties, and confers no
rights."
------------------------------------------------------------------------

Anyone who could help me out.I've installed RRAS for dial-up. i was able

to dial-in to the server and the server accepts the computer that dialed
in.in the mobile unit i cannot access the resources of the LAN. any help
would very much be appreciated thanks.

 

[Tom Turck]

Try setting the RAS server to use the Static Pool instead
of the default DHCP assigned. Be sure to use unused ip
address from your production LAN's subnet if you can spare
enough ip addresses from your production LAN. You can set
this in the RRAS console by choosing your RRAS server,
selecting Properties and then the IP tab and look for IP
address assignment.

-----Original Message-----
Anyone who could help me out.I've installed RRAS for dial-

up. i was able to dial-in to the server and the server
accepts the computer that dialed in.in the mobile unit i
cannot access the resources of the LAN. any help would
very much be appreciated thanks.