N
Nizam Ahmad
I have a home network of 4 computers and a laptop to share files & a
common printer. All of them are networking OK with XP Pro, on file
transfer and common printer use, but, I don't have any luck in sharing the
Internet. Only the fist PC with the modem & Ethernet card, finds
the Internet from DSL, but the rest of the PCs have no luck sharing DSL.
I was using Win98 for several years as the DSL entry PC, and my rest of the
home PCs were running XP Pro. Everything worked fine. File transfer,
common printer use and shareing the TCP/IP line.
But, as I replaced the Win98SE with XP Pro, for the DSL entry PC , I am
unable to share the TCP/IP. Although the Internal network works fine.
Do I need to create a 'BRIDGE' connection between the Ethernet card and
local
network card, so that I can share the Internet TCP/IP to my remaining
home PCs, or just 'SHARE' is OK? If so, how do I create the 'BRIDGE' ?
Cards in use, for the DSL entry PC.
1) PCI Fast Ethernet Adapter
2) 3Com 3C410 HomeConnect 10X card
Card in use for the home networking for each table-top PCs
1) 3Com 3C410 HomeConnect 10X card
Laptop is connected to the network with
1) Netgear Phoneline 10X PA-101 adapter, on USB port
Any suggestion will be appreciated. Thanks.
July 30, 2004
11:12 pm
common printer. All of them are networking OK with XP Pro, on file
transfer and common printer use, but, I don't have any luck in sharing the
Internet. Only the fist PC with the modem & Ethernet card, finds
the Internet from DSL, but the rest of the PCs have no luck sharing DSL.
I was using Win98 for several years as the DSL entry PC, and my rest of the
home PCs were running XP Pro. Everything worked fine. File transfer,
common printer use and shareing the TCP/IP line.
But, as I replaced the Win98SE with XP Pro, for the DSL entry PC , I am
unable to share the TCP/IP. Although the Internal network works fine.
Do I need to create a 'BRIDGE' connection between the Ethernet card and
local
network card, so that I can share the Internet TCP/IP to my remaining
home PCs, or just 'SHARE' is OK? If so, how do I create the 'BRIDGE' ?
Cards in use, for the DSL entry PC.
1) PCI Fast Ethernet Adapter
2) 3Com 3C410 HomeConnect 10X card
Card in use for the home networking for each table-top PCs
1) 3Com 3C410 HomeConnect 10X card
Laptop is connected to the network with
1) Netgear Phoneline 10X PA-101 adapter, on USB port
Any suggestion will be appreciated. Thanks.
July 30, 2004
11:12 pm