HELP ME PLEASE

[Guest]

Got invaded by hostfile hijacker and 7 trojans Vxgame new version beeing one
of them. Took me 3 days to clear it all up and then the problems started.
XP shuts down for no reason and restart with out problem like nothing
happened.
diasble restart and the next thing comes up 0x0...08E ( and a few others in
here ).
took up contact with MS in Belgium and was told it was a mem failliure ok
who am i to discuss that. receive a link for a progy called memtest86 V1.70,
do as told and what comes up error in 1 of my memory sticks, ok take out and
replace with new one, so u think the problem is over ya wishfull thinking
keep
getting errors like need to reinstall video ok did that, update bios did that
to and so on. Now u people are my last hope here each time i try to update it
shuts down error 0x0...8E now i'm almost surtain it is not a hardware problem
but a windows one can some pls help me getting to the point to open the
window
and yea well huh.The only way i am using my pc now is in safe mode cause
that is the only way it will work.

 

[Guest]

Got invaded by hostfile hijacker and 7 trojans Vxgame new version beeing one
of them. Took me 3 days to clear it all up and then the problems started.
XP shuts down for no reason and restart with out problem like nothing
happened.
diasble restart and the next thing comes up 0x0...08E ( and a few others in
here ).
took up contact with MS in Belgium and was told it was a mem failliure ok
who am i to discuss that. receive a link for a progy called memtest86 V1.70,
do as told and what comes up error in 1 of my memory sticks, ok take out and
replace with new one, so u think the problem is over ya wishfull thinking
keep
getting errors like need to reinstall video ok did that, update bios did that
to and so on. Now u people are my last hope here each time i try to update it
shuts down error 0x0...8E now i'm almost surtain it is not a hardware problem
but a windows one can some pls help me getting to the point to open the
window
and yea well huh.The only way i am using my pc now is in safe mode cause
that is the only way it will work.

So assuming you cleaned all and all well and dusted, try to run this command
from the run command by typing:
sfc /scannow click [OK] and wait for it to finish you may be asked to
insert the XP CD (which I can't see happen in safe mode).
It will be handy if you include the complete error message instead of hiding
or given us a portion of it!.
You can try chkdsk.
HTH.
Let us know.
Regards,
nass

 

[Guest]

Got invaded by hostfile hijacker and 7 trojans Vxgame new version beeing one
of them. Took me 3 days to clear it all up and then the problems started.
XP shuts down for no reason and restart with out problem like nothing
happened.
diasble restart and the next thing comes up 0x0...08E ( and a few others in
here ).
took up contact with MS in Belgium and was told it was a mem failliure ok
who am i to discuss that. receive a link for a progy called memtest86 V1.70,
do as told and what comes up error in 1 of my memory sticks, ok take out and
replace with new one, so u think the problem is over ya wishfull thinking
keep
getting errors like need to reinstall video ok did that, update bios did that
to and so on. Now u people are my last hope here each time i try to update it
shuts down error 0x0...8E now i'm almost surtain it is not a hardware problem
but a windows one can some pls help me getting to the point to open the
window
and yea well huh.The only way i am using my pc now is in safe mode cause
that is the only way it will work.

So assuming you cleaned all and all well and dusted, try to run this command
from the run command by typing:
sfc /scannow click [OK] and wait for it to finish you may be asked to
insert the XP CD (which I can't see happen in safe mode).
It will be handy if you include the complete error message instead of hiding
or given us a portion of it!.
You can try chkdsk.
HTH.
Let us know.
Regards,
nass

Hey thanks for responding sir well i was told by MS Belgium-Netherlands that
the first part said enough but i will put it in full sir (0x0000008E
(0x0000005, 0x00000000,0xB4DB5B84, 0x00000000)) and everything in between the
() was of no consearn i was told.

 

[Guest]

Got invaded by hostfile hijacker and 7 trojans Vxgame new version beeing one
of them. Took me 3 days to clear it all up and then the problems started.
XP shuts down for no reason and restart with out problem like nothing
happened.
diasble restart and the next thing comes up 0x0...08E ( and a few others in
here ).
took up contact with MS in Belgium and was told it was a mem failliure ok
who am i to discuss that. receive a link for a progy called memtest86 V1.70,
do as told and what comes up error in 1 of my memory sticks, ok take out and
replace with new one, so u think the problem is over ya wishfull thinking
keep
getting errors like need to reinstall video ok did that, update bios did that
to and so on. Now u people are my last hope here each time i try to update it
shuts down error 0x0...8E now i'm almost surtain it is not a hardware problem
but a windows one can some pls help me getting to the point to open the
window
and yea well huh.The only way i am using my pc now is in safe mode cause
that is the only way it will work.

So assuming you cleaned all and all well and dusted, try to run this command
from the run command by typing:
sfc /scannow click [OK] and wait for it to finish you may be asked to
insert the XP CD (which I can't see happen in safe mode).
It will be handy if you include the complete error message instead of hiding
or given us a portion of it!.
You can try chkdsk.
HTH.
Let us know.
Regards,
nass

Hey thanks for responding sir well i was told by MS Belgium-Netherlands that
the first part said enough but i will put it in full sir 0x0000008E
(0x0000005, 0x00000000,0xB4DB5B84, 0x00000000)and everything in between the
() was of no consearn i was told.

 

[Guest]

0x0000008E (0x0000005, 0x00000000,0xB4DB5B84, 0x00000000)
did a full system scan in safe mode 5 times did the same with my Macfee
virus scan
and then the progy MS allways says to use lol, did 2 online scans at Macfee
website and all resulted in 0 found. But i will do the scan again as u advice
me to do. I can still run in normal mode but eachtime i try to install a
windows application whether it is an update or MP11 it gives me the error
above.

Got invaded by hostfile hijacker and 7 trojans Vxgame new version beeing one
of them. Took me 3 days to clear it all up and then the problems started.
XP shuts down for no reason and restart with out problem like nothing
happened.
diasble restart and the next thing comes up 0x0...08E ( and a few others in
here ).
took up contact with MS in Belgium and was told it was a mem failliure ok
who am i to discuss that. receive a link for a progy called memtest86 V1.70,
do as told and what comes up error in 1 of my memory sticks, ok take out and
replace with new one, so u think the problem is over ya wishfull thinking
keep
getting errors like need to reinstall video ok did that, update bios did that
to and so on. Now u people are my last hope here each time i try to update it
shuts down error 0x0...8E now i'm almost surtain it is not a hardware problem
but a windows one can some pls help me getting to the point to open the
window
and yea well huh.The only way i am using my pc now is in safe mode cause
that is the only way it will work.

So assuming you cleaned all and all well and dusted, try to run this command
from the run command by typing:
sfc /scannow click [OK] and wait for it to finish you may be asked to
insert the XP CD (which I can't see happen in safe mode).
It will be handy if you include the complete error message instead of hiding
or given us a portion of it!.
You can try chkdsk.
HTH.
Let us know.
Regards,
nass

Hey thanks for responding sir well i was told by MS Belgium-Netherlands that
the first part said enough but i will put it in full sir (0x0000008E
(0x0000005, 0x00000000,0xB4DB5B84, 0x00000000)) and everything in between the
() was of no consearn i was told.

 

[Guest]

You need to look in the Event Viewer for other Error messages (X) as this
can indicate a hardware and software corruption after the infection by the
virus.
Did you scan for malwares also as Viruses, try to download this tool:
http://www.safer-networking.org for Spybot S&D

Then in the Normal Mode try to Open the command Run by doing this:
Click Start >> Run and type in: sfc /scannow then click [OK] or Hit
Enter on your keyboard.
Read these links here:
A "STOP: 0x0000008E" error message occurs when you change the hardware
acceleration setting
http://support.microsoft.com/kb/330187


The HaxDoor virus may cause a "STOP 0x00000050" or "STOP 0x0000008e" error
message
http://support.microsoft.com/kb/903251

HTH.
Let us know
nass

0x0000008E (0x0000005, 0x00000000,0xB4DB5B84, 0x00000000)
did a full system scan in safe mode 5 times did the same with my Macfee
virus scan
and then the progy MS allways says to use lol, did 2 online scans at Macfee
website and all resulted in 0 found. But i will do the scan again as u advice
me to do. I can still run in normal mode but eachtime i try to install a
windows application whether it is an update or MP11 it gives me the error
above.

:

Got invaded by hostfile hijacker and 7 trojans Vxgame new version beeing one
of them. Took me 3 days to clear it all up and then the problems started.
XP shuts down for no reason and restart with out problem like nothing
happened.
diasble restart and the next thing comes up 0x0...08E ( and a few others in
here ).
took up contact with MS in Belgium and was told it was a mem failliure ok
who am i to discuss that. receive a link for a progy called memtest86 V1.70,
do as told and what comes up error in 1 of my memory sticks, ok take out and
replace with new one, so u think the problem is over ya wishfull thinking
keep
getting errors like need to reinstall video ok did that, update bios did that
to and so on. Now u people are my last hope here each time i try to update it
shuts down error 0x0...8E now i'm almost surtain it is not a hardware problem
but a windows one can some pls help me getting to the point to open the
window
and yea well huh.The only way i am using my pc now is in safe mode cause
that is the only way it will work.

So assuming you cleaned all and all well and dusted, try to run this command
from the run command by typing:
sfc /scannow click [OK] and wait for it to finish you may be asked to
insert the XP CD (which I can't see happen in safe mode).
It will be handy if you include the complete error message instead of hiding
or given us a portion of it!.
You can try chkdsk.
HTH.
Let us know.
Regards,
nass

Hey thanks for responding sir well i was told by MS Belgium-Netherlands that
the first part said enough but i will put it in full sir (0x0000008E
(0x0000005, 0x00000000,0xB4DB5B84, 0x00000000)) and everything in between the
() was of no consearn i was told.

 

[Guest]

to answer your first questions sir i did the first with a representant from
MS-Benelux on the phone. did the whole spybot in safemode twice the first
time with Lan connection the second with out result idem dito 0 found. And
now i will do nr 3 as u advice me to do.
Thank u again for the help sir, its greatly appreciated

You need to look in the Event Viewer for other Error messages (X) as this
can indicate a hardware and software corruption after the infection by the
virus.
Did you scan for malwares also as Viruses, try to download this tool:
http://www.safer-networking.org for Spybot S&D

Then in the Normal Mode try to Open the command Run by doing this:
Click Start >> Run and type in: sfc /scannow then click [OK] or Hit
Enter on your keyboard.
Read these links here:
A "STOP: 0x0000008E" error message occurs when you change the hardware
acceleration setting
http://support.microsoft.com/kb/330187


The HaxDoor virus may cause a "STOP 0x00000050" or "STOP 0x0000008e" error
message
http://support.microsoft.com/kb/903251

HTH.
Let us know
nass

0x0000008E (0x0000005, 0x00000000,0xB4DB5B84, 0x00000000)
did a full system scan in safe mode 5 times did the same with my Macfee
virus scan
and then the progy MS allways says to use lol, did 2 online scans at Macfee
website and all resulted in 0 found. But i will do the scan again as u advice
me to do. I can still run in normal mode but eachtime i try to install a
windows application whether it is an update or MP11 it gives me the error
above.

:



:

Got invaded by hostfile hijacker and 7 trojans Vxgame new version beeing one
of them. Took me 3 days to clear it all up and then the problems started.
XP shuts down for no reason and restart with out problem like nothing
happened.
diasble restart and the next thing comes up 0x0...08E ( and a few others in
here ).
took up contact with MS in Belgium and was told it was a mem failliure ok
who am i to discuss that. receive a link for a progy called memtest86 V1.70,
do as told and what comes up error in 1 of my memory sticks, ok take out and
replace with new one, so u think the problem is over ya wishfull thinking
keep
getting errors like need to reinstall video ok did that, update bios did that
to and so on. Now u people are my last hope here each time i try to update it
shuts down error 0x0...8E now i'm almost surtain it is not a hardware problem
but a windows one can some pls help me getting to the point to open the
window
and yea well huh.The only way i am using my pc now is in safe mode cause
that is the only way it will work.

So assuming you cleaned all and all well and dusted, try to run this command
from the run command by typing:
sfc /scannow click [OK] and wait for it to finish you may be asked to
insert the XP CD (which I can't see happen in safe mode).
It will be handy if you include the complete error message instead of hiding
or given us a portion of it!.
You can try chkdsk.
HTH.
Let us know.
Regards,
nass

Hey thanks for responding sir well i was told by MS Belgium-Netherlands that
the first part said enough but i will put it in full sir (0x0000008E
(0x0000005, 0x00000000,0xB4DB5B84, 0x00000000)) and everything in between the
() was of no consearn i was told.

 

[Guest]

Browser,
Keep it simple we are not in the army here LOL, just nass with a small (n)
fine for me, we a group/community.
Do this:
Click Start >> the click on Run and type in the box : sfc /scannow then
click OK.
You can copy and paste the command or the line to your run command prompt,
you will need your XP CD to insert it in if it prompted you to do so.

Reboot/Restart your machine and see if that helped.
If not then do this step:
Click Start >> Click On Run then type in: eventvwr and click [OK]
On the Event Viewer double click on any Error message (X) to get more
information about the cause of it and you can copy and paste in your next
message.
HTH.
Regards,
nass

to answer your first questions sir i did the first with a representant from
MS-Benelux on the phone. did the whole spybot in safemode twice the first
time with Lan connection the second with out result idem dito 0 found. And
now i will do nr 3 as u advice me to do.
Thank u again for the help sir, its greatly appreciated

You need to look in the Event Viewer for other Error messages (X) as this
can indicate a hardware and software corruption after the infection by the
virus.
Did you scan for malwares also as Viruses, try to download this tool:
http://www.safer-networking.org for Spybot S&D

Then in the Normal Mode try to Open the command Run by doing this:
Click Start >> Run and type in: sfc /scannow then click [OK] or Hit
Enter on your keyboard.
Read these links here:
A "STOP: 0x0000008E" error message occurs when you change the hardware
acceleration setting
http://support.microsoft.com/kb/330187


The HaxDoor virus may cause a "STOP 0x00000050" or "STOP 0x0000008e" error
message
http://support.microsoft.com/kb/903251

HTH.
Let us know
nass

0x0000008E (0x0000005, 0x00000000,0xB4DB5B84, 0x00000000)
did a full system scan in safe mode 5 times did the same with my Macfee
virus scan
and then the progy MS allways says to use lol, did 2 online scans at Macfee
website and all resulted in 0 found. But i will do the scan again as u advice
me to do. I can still run in normal mode but eachtime i try to install a
windows application whether it is an update or MP11 it gives me the error
above.

:



:



:

Got invaded by hostfile hijacker and 7 trojans Vxgame new version beeing one
of them. Took me 3 days to clear it all up and then the problems started.
XP shuts down for no reason and restart with out problem like nothing
happened.
diasble restart and the next thing comes up 0x0...08E ( and a few others in
here ).
took up contact with MS in Belgium and was told it was a mem failliure ok
who am i to discuss that. receive a link for a progy called memtest86 V1.70,
do as told and what comes up error in 1 of my memory sticks, ok take out and
replace with new one, so u think the problem is over ya wishfull thinking
keep
getting errors like need to reinstall video ok did that, update bios did that
to and so on. Now u people are my last hope here each time i try to update it
shuts down error 0x0...8E now i'm almost surtain it is not a hardware problem
but a windows one can some pls help me getting to the point to open the
window
and yea well huh.The only way i am using my pc now is in safe mode cause
that is the only way it will work.

So assuming you cleaned all and all well and dusted, try to run this command
from the run command by typing:
sfc /scannow click [OK] and wait for it to finish you may be asked to
insert the XP CD (which I can't see happen in safe mode).
It will be handy if you include the complete error message instead of hiding
or given us a portion of it!.
You can try chkdsk.
HTH.
Let us know.
Regards,
nass

Hey thanks for responding sir well i was told by MS Belgium-Netherlands that
the first part said enough but i will put it in full sir (0x0000008E
(0x0000005, 0x00000000,0xB4DB5B84, 0x00000000)) and everything in between the
() was of no consearn i was told.

 

[Guest]

Ok sir,
well nass i did and the first time it went bananas allready just short of
ending the sfc /scannow
so i tried to do it in safe mode but that is a nono, so i went back to
normal mode and tried it again this time it went all the way and i was hoping
on a report but my screen went blue on me again and here is the error
0x0000008E (0x0000005, 0xF40E080E, 0xB9A8AA20, 0x00000000)

i hope it means something to you cause i gave up on it

Browser,
Keep it simple we are not in the army here LOL, just nass with a small (n)
fine for me, we a group/community.
Do this:
Click Start >> the click on Run and type in the box : sfc /scannow then
click OK.
You can copy and paste the command or the line to your run command prompt,
you will need your XP CD to insert it in if it prompted you to do so.

Reboot/Restart your machine and see if that helped.
If not then do this step:
Click Start >> Click On Run then type in: eventvwr and click [OK]
On the Event Viewer double click on any Error message (X) to get more
information about the cause of it and you can copy and paste in your next
message.
HTH.
Regards,
nass

to answer your first questions sir i did the first with a representant from
MS-Benelux on the phone. did the whole spybot in safemode twice the first
time with Lan connection the second with out result idem dito 0 found. And
now i will do nr 3 as u advice me to do.
Thank u again for the help sir, its greatly appreciated

You need to look in the Event Viewer for other Error messages (X) as this
can indicate a hardware and software corruption after the infection by the
virus.
Did you scan for malwares also as Viruses, try to download this tool:
http://www.safer-networking.org for Spybot S&D

Then in the Normal Mode try to Open the command Run by doing this:
Click Start >> Run and type in: sfc /scannow then click [OK] or Hit
Enter on your keyboard.
Read these links here:
A "STOP: 0x0000008E" error message occurs when you change the hardware
acceleration setting
http://support.microsoft.com/kb/330187


The HaxDoor virus may cause a "STOP 0x00000050" or "STOP 0x0000008e" error
message
http://support.microsoft.com/kb/903251

HTH.
Let us know
nass

:

0x0000008E (0x0000005, 0x00000000,0xB4DB5B84, 0x00000000)
did a full system scan in safe mode 5 times did the same with my Macfee
virus scan
and then the progy MS allways says to use lol, did 2 online scans at Macfee
website and all resulted in 0 found. But i will do the scan again as u advice
me to do. I can still run in normal mode but eachtime i try to install a
windows application whether it is an update or MP11 it gives me the error
above.

:



:



:

Got invaded by hostfile hijacker and 7 trojans Vxgame new version beeing one
of them. Took me 3 days to clear it all up and then the problems started.
XP shuts down for no reason and restart with out problem like nothing
happened.
diasble restart and the next thing comes up 0x0...08E ( and a few others in
here ).
took up contact with MS in Belgium and was told it was a mem failliure ok
who am i to discuss that. receive a link for a progy called memtest86 V1.70,
do as told and what comes up error in 1 of my memory sticks, ok take out and
replace with new one, so u think the problem is over ya wishfull thinking
keep
getting errors like need to reinstall video ok did that, update bios did that
to and so on. Now u people are my last hope here each time i try to update it
shuts down error 0x0...8E now i'm almost surtain it is not a hardware problem
but a windows one can some pls help me getting to the point to open the
window
and yea well huh.The only way i am using my pc now is in safe mode cause
that is the only way it will work.

So assuming you cleaned all and all well and dusted, try to run this command
from the run command by typing:
sfc /scannow click [OK] and wait for it to finish you may be asked to
insert the XP CD (which I can't see happen in safe mode).
It will be handy if you include the complete error message instead of hiding
or given us a portion of it!.
You can try chkdsk.
HTH.
Let us know.
Regards,
nass

Hey thanks for responding sir well i was told by MS Belgium-Netherlands that
the first part said enough but i will put it in full sir (0x0000008E
(0x0000005, 0x00000000,0xB4DB5B84, 0x00000000)) and everything in between the
() was of no consearn i was told.

 

[Guest]

Ok Browser,
Well I want you to tell me what Hardware installed on your machine or any
Hardware installed and Also what Anti-Virus you have and how many?.
If you have a printer try to uninstall it, since you can start Okay in Safe
Mode then it is likely a Hardware issue, so look in the Device manager to see
which Device is failing.
To access the Device Manager do this:
Right click My Computer and select Properties, then click Hardware Tab, then
click the Device Manager Button and Expand all the Pluses there and see if
any Red (X) or Yellow Exclamation (!)mark on any device there and Right click
and get more Info about it and post them here in your next post.
HTH.
Let us know.
Regards,
nass

Ok sir,
well nass i did and the first time it went bananas allready just short of
ending the sfc /scannow
so i tried to do it in safe mode but that is a nono, so i went back to
normal mode and tried it again this time it went all the way and i was hoping
on a report but my screen went blue on me again and here is the error
0x0000008E (0x0000005, 0xF40E080E, 0xB9A8AA20, 0x00000000)

i hope it means something to you cause i gave up on it

Browser,
Keep it simple we are not in the army here LOL, just nass with a small (n)
fine for me, we a group/community.
Do this:
Click Start >> the click on Run and type in the box : sfc /scannow then
click OK.
You can copy and paste the command or the line to your run command prompt,
you will need your XP CD to insert it in if it prompted you to do so.

Reboot/Restart your machine and see if that helped.
If not then do this step:
Click Start >> Click On Run then type in: eventvwr and click [OK]
On the Event Viewer double click on any Error message (X) to get more
information about the cause of it and you can copy and paste in your next
message.
HTH.
Regards,
nass

to answer your first questions sir i did the first with a representant from
MS-Benelux on the phone. did the whole spybot in safemode twice the first
time with Lan connection the second with out result idem dito 0 found. And
now i will do nr 3 as u advice me to do.
Thank u again for the help sir, its greatly appreciated

:


You need to look in the Event Viewer for other Error messages (X) as this
can indicate a hardware and software corruption after the infection by the
virus.
Did you scan for malwares also as Viruses, try to download this tool:
http://www.safer-networking.org for Spybot S&D

Then in the Normal Mode try to Open the command Run by doing this:
Click Start >> Run and type in: sfc /scannow then click [OK] or Hit
Enter on your keyboard.
Read these links here:
A "STOP: 0x0000008E" error message occurs when you change the hardware
acceleration setting
http://support.microsoft.com/kb/330187


The HaxDoor virus may cause a "STOP 0x00000050" or "STOP 0x0000008e" error
message
http://support.microsoft.com/kb/903251

HTH.
Let us know
nass

:

0x0000008E (0x0000005, 0x00000000,0xB4DB5B84, 0x00000000)
did a full system scan in safe mode 5 times did the same with my Macfee
virus scan
and then the progy MS allways says to use lol, did 2 online scans at Macfee
website and all resulted in 0 found. But i will do the scan again as u advice
me to do. I can still run in normal mode but eachtime i try to install a
windows application whether it is an update or MP11 it gives me the error
above.

 

[Guest]

did that nass and no X or yellow tabs in there. S i guess the faulty mem chip
crippled my board at the same time huh??

Ok Browser,
Well I want you to tell me what Hardware installed on your machine or any
Hardware installed and Also what Anti-Virus you have and how many?.
If you have a printer try to uninstall it, since you can start Okay in Safe
Mode then it is likely a Hardware issue, so look in the Device manager to see
which Device is failing.
To access the Device Manager do this:
Right click My Computer and select Properties, then click Hardware Tab, then
click the Device Manager Button and Expand all the Pluses there and see if
any Red (X) or Yellow Exclamation (!)mark on any device there and Right click
and get more Info about it and post them here in your next post.
HTH.
Let us know.
Regards,
nass

Ok sir,
well nass i did and the first time it went bananas allready just short of
ending the sfc /scannow
so i tried to do it in safe mode but that is a nono, so i went back to
normal mode and tried it again this time it went all the way and i was hoping
on a report but my screen went blue on me again and here is the error
0x0000008E (0x0000005, 0xF40E080E, 0xB9A8AA20, 0x00000000)

i hope it means something to you cause i gave up on it

Browser,
Keep it simple we are not in the army here LOL, just nass with a small (n)
fine for me, we a group/community.
Do this:
Click Start >> the click on Run and type in the box : sfc /scannow then
click OK.
You can copy and paste the command or the line to your run command prompt,
you will need your XP CD to insert it in if it prompted you to do so.

Reboot/Restart your machine and see if that helped.
If not then do this step:
Click Start >> Click On Run then type in: eventvwr and click [OK]
On the Event Viewer double click on any Error message (X) to get more
information about the cause of it and you can copy and paste in your next
message.
HTH.
Regards,
nass

:

to answer your first questions sir i did the first with a representant from
MS-Benelux on the phone. did the whole spybot in safemode twice the first
time with Lan connection the second with out result idem dito 0 found. And
now i will do nr 3 as u advice me to do.
Thank u again for the help sir, its greatly appreciated

:


You need to look in the Event Viewer for other Error messages (X) as this
can indicate a hardware and software corruption after the infection by the
virus.
Did you scan for malwares also as Viruses, try to download this tool:
http://www.safer-networking.org for Spybot S&D

Then in the Normal Mode try to Open the command Run by doing this:
Click Start >> Run and type in: sfc /scannow then click [OK] or Hit
Enter on your keyboard.
Read these links here:
A "STOP: 0x0000008E" error message occurs when you change the hardware
acceleration setting
http://support.microsoft.com/kb/330187


The HaxDoor virus may cause a "STOP 0x00000050" or "STOP 0x0000008e" error
message
http://support.microsoft.com/kb/903251

HTH.
Let us know
nass

:

0x0000008E (0x0000005, 0x00000000,0xB4DB5B84, 0x00000000)
did a full system scan in safe mode 5 times did the same with my Macfee
virus scan
and then the progy MS allways says to use lol, did 2 online scans at Macfee
website and all resulted in 0 found. But i will do the scan again as u advice
me to do. I can still run in normal mode but eachtime i try to install a
windows application whether it is an update or MP11 it gives me the error
above.

 

[Guest]

Well brow I really can't see other option other than to backup your data and
perform a clean installation for the Operating system.
HTH.
Regards,
nass

did that nass and no X or yellow tabs in there. S i guess the faulty mem chip
crippled my board at the same time huh??

Ok Browser,
Well I want you to tell me what Hardware installed on your machine or any
Hardware installed and Also what Anti-Virus you have and how many?.
If you have a printer try to uninstall it, since you can start Okay in Safe
Mode then it is likely a Hardware issue, so look in the Device manager to see
which Device is failing.
To access the Device Manager do this:
Right click My Computer and select Properties, then click Hardware Tab, then
click the Device Manager Button and Expand all the Pluses there and see if
any Red (X) or Yellow Exclamation (!)mark on any device there and Right click
and get more Info about it and post them here in your next post.
HTH.
Let us know.
Regards,
nass

Ok sir,
well nass i did and the first time it went bananas allready just short of
ending the sfc /scannow
so i tried to do it in safe mode but that is a nono, so i went back to
normal mode and tried it again this time it went all the way and i was hoping
on a report but my screen went blue on me again and here is the error
0x0000008E (0x0000005, 0xF40E080E, 0xB9A8AA20, 0x00000000)

i hope it means something to you cause i gave up on it

:


Browser,
Keep it simple we are not in the army here LOL, just nass with a small (n)
fine for me, we a group/community.
Do this:
Click Start >> the click on Run and type in the box : sfc /scannow then
click OK.
You can copy and paste the command or the line to your run command prompt,
you will need your XP CD to insert it in if it prompted you to do so.

Reboot/Restart your machine and see if that helped.
If not then do this step:
Click Start >> Click On Run then type in: eventvwr and click [OK]
On the Event Viewer double click on any Error message (X) to get more
information about the cause of it and you can copy and paste in your next
message.
HTH.
Regards,
nass

:

to answer your first questions sir i did the first with a representant from
MS-Benelux on the phone. did the whole spybot in safemode twice the first
time with Lan connection the second with out result idem dito 0 found. And
now i will do nr 3 as u advice me to do.
Thank u again for the help sir, its greatly appreciated

:


You need to look in the Event Viewer for other Error messages (X) as this
can indicate a hardware and software corruption after the infection by the
virus.
Did you scan for malwares also as Viruses, try to download this tool:
http://www.safer-networking.org for Spybot S&D

Then in the Normal Mode try to Open the command Run by doing this:
Click Start >> Run and type in: sfc /scannow then click [OK] or Hit
Enter on your keyboard.
Read these links here:
A "STOP: 0x0000008E" error message occurs when you change the hardware
acceleration setting
http://support.microsoft.com/kb/330187


The HaxDoor virus may cause a "STOP 0x00000050" or "STOP 0x0000008e" error
message
http://support.microsoft.com/kb/903251

HTH.
Let us know
nass

:

0x0000008E (0x0000005, 0x00000000,0xB4DB5B84, 0x00000000)
did a full system scan in safe mode 5 times did the same with my Macfee
virus scan
and then the progy MS allways says to use lol, did 2 online scans at Macfee
website and all resulted in 0 found. But i will do the scan again as u advice
me to do. I can still run in normal mode but eachtime i try to install a
windows application whether it is an update or MP11 it gives me the error
above.

 

[Guest]

in my eventvw i get the error in WinMgmt
then DCOM, sfsync02, a waring in yellow for DHCP and that is all

did that nass and no X or yellow tabs in there. S i guess the faulty mem chip
crippled my board at the same time huh??

Ok Browser,
Well I want you to tell me what Hardware installed on your machine or any
Hardware installed and Also what Anti-Virus you have and how many?.
If you have a printer try to uninstall it, since you can start Okay in Safe
Mode then it is likely a Hardware issue, so look in the Device manager to see
which Device is failing.
To access the Device Manager do this:
Right click My Computer and select Properties, then click Hardware Tab, then
click the Device Manager Button and Expand all the Pluses there and see if
any Red (X) or Yellow Exclamation (!)mark on any device there and Right click
and get more Info about it and post them here in your next post.
HTH.
Let us know.
Regards,
nass

Ok sir,
well nass i did and the first time it went bananas allready just short of
ending the sfc /scannow
so i tried to do it in safe mode but that is a nono, so i went back to
normal mode and tried it again this time it went all the way and i was hoping
on a report but my screen went blue on me again and here is the error
0x0000008E (0x0000005, 0xF40E080E, 0xB9A8AA20, 0x00000000)

i hope it means something to you cause i gave up on it

:


Browser,
Keep it simple we are not in the army here LOL, just nass with a small (n)
fine for me, we a group/community.
Do this:
Click Start >> the click on Run and type in the box : sfc /scannow then
click OK.
You can copy and paste the command or the line to your run command prompt,
you will need your XP CD to insert it in if it prompted you to do so.

Reboot/Restart your machine and see if that helped.
If not then do this step:
Click Start >> Click On Run then type in: eventvwr and click [OK]
On the Event Viewer double click on any Error message (X) to get more
information about the cause of it and you can copy and paste in your next
message.
HTH.
Regards,
nass

:

to answer your first questions sir i did the first with a representant from
MS-Benelux on the phone. did the whole spybot in safemode twice the first
time with Lan connection the second with out result idem dito 0 found. And
now i will do nr 3 as u advice me to do.
Thank u again for the help sir, its greatly appreciated

:


You need to look in the Event Viewer for other Error messages (X) as this
can indicate a hardware and software corruption after the infection by the
virus.
Did you scan for malwares also as Viruses, try to download this tool:
http://www.safer-networking.org for Spybot S&D

Then in the Normal Mode try to Open the command Run by doing this:
Click Start >> Run and type in: sfc /scannow then click [OK] or Hit
Enter on your keyboard.
Read these links here:
A "STOP: 0x0000008E" error message occurs when you change the hardware
acceleration setting
http://support.microsoft.com/kb/330187


The HaxDoor virus may cause a "STOP 0x00000050" or "STOP 0x0000008e" error
message
http://support.microsoft.com/kb/903251

HTH.
Let us know
nass

:

0x0000008E (0x0000005, 0x00000000,0xB4DB5B84, 0x00000000)
did a full system scan in safe mode 5 times did the same with my Macfee
virus scan
and then the progy MS allways says to use lol, did 2 online scans at Macfee
website and all resulted in 0 found. But i will do the scan again as u advice
me to do. I can still run in normal mode but eachtime i try to install a
windows application whether it is an update or MP11 it gives me the error
above.

 

[Guest]

in my eventvw i get the error in WinMgmt
then DCOM, sfsync02, a waring in yellow for DHCP and that is all

The sfsynco2.sys is for a File protection software called StarForce
Protection Synchronization Driver, do you have this installed?.
If yes then uninstall it and delete all traces for it from here:
C:\Windows\System32\drivers\sfsync02.sys
C:\Windows\System32\drivers\sfhIpo2.sys
C:\Windows\System32\drivers\sfhIp01.sys
C:\Windows\System32\drivers\sfdrvo1.sys
C:\Windows\System32\drivers\prodrvo6.sys
C:\Windows\System32\drivers\prohIp02.sys
Then Right click on your My Computer and select properties then click on
Hardware Tab then on Device Manager there under Unplug and Play expand it and
if the StarForce there Remove it.

I Need you to look in these Keys:
By opening a run command and type in :
regedit.exe click [OK]
On the Registry Editor locate this Keys:
[-]HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run = Look
in the Right Pane/Window for the Running Processes write them down and post
them in your next post.
[-]HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunServices
= look for them and write them down and post them in your next post.
After uninstall the StarForce Reboot and do a scan for malwares and Viruses
again please.
It is too late here in the UK, If I didn't come back to that mean tomorrow.
HTH.
Regards,
nass

 

[Guest]

ok nass, np mate i'm 1 hour ahead of ya so i know wthat u talking about but u
just gave me a handfull so the items requested will be in by tomorow. Thanks
again for the great help here just
can't figure why these people in the Benelux MS office did'n tell me all
this? but hey i' m just greatfull
for the help i can get on this.

in my eventvw i get the error in WinMgmt
then DCOM, sfsync02, a waring in yellow for DHCP and that is all

The sfsynco2.sys is for a File protection software called StarForce
Protection Synchronization Driver, do you have this installed?.
If yes then uninstall it and delete all traces for it from here:
C:\Windows\System32\drivers\sfsync02.sys
C:\Windows\System32\drivers\sfhIpo2.sys
C:\Windows\System32\drivers\sfhIp01.sys
C:\Windows\System32\drivers\sfdrvo1.sys
C:\Windows\System32\drivers\prodrvo6.sys
C:\Windows\System32\drivers\prohIp02.sys
Then Right click on your My Computer and select properties then click on
Hardware Tab then on Device Manager there under Unplug and Play expand it and
if the StarForce there Remove it.

I Need you to look in these Keys:
By opening a run command and type in :
regedit.exe click [OK]
On the Registry Editor locate this Keys:
[-]HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run = Look
in the Right Pane/Window for the Running Processes write them down and post
them in your next post.
[-]HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunServices
= look for them and write them down and post them in your next post.
After uninstall the StarForce Reboot and do a scan for malwares and Viruses
again please.
It is too late here in the UK, If I didn't come back to that mean tomorrow.
HTH.
Regards,
nass
-------
www.nasstec.co.uk

Also download this and run it to clean the Hives in the registry:
http://www.microsoft.com/downloads/...b570-42470e2f3582&displaylang=en&Hash=SY534SC

 

[Guest]

in the Run Right Pane View is the following
-----------------------------------------------------------------------------------------------------------------
(standaard) - reg_sz - no value
BluetoothAuthentication Agent - reg_sz - rundll32.exe
bthprops.cpl,,BluetoothAuthenticationAgent
KernelFaultCheck - reg_expand_sz - %systemroot%\system32\dump 0 -k
Logitech Hardware Abstraction Layer - reg_sz - KHALMNPR.EXE
LogitechVideoRepair - reg_sz - E:\progfiles\logitech\video\ISStart.exe
LogitechVideoTray - reg_sz - E:\progfiles\logitech\video\logiTray.exe
MCAgentExe - reg_sz - c:\progra~1\mcafee.com\agent\mcagent.exe
MCUpdate - reg_sz - c:\progra~1\mcafee.com\agent\mcupdate.exe
Nerofiltercheck - reg_sz - c:\program files\commo
files\Ahead\lib\NeroCheck.exe
NvCplDaemon - reg_sz - RUDLL32.exe C:\windows\system32\NvCpl.dll,NvStartup
NvMediacenter - reg_sz - RunDLL32.exe NvMCTray.dll,NvTaskbarInit
OASClnt - reg_sz - C:\Program Files\McAfee.com\VSO\oasclnt.exe
Soundman - reg_sz - SOUNDMAN.EXE
SunJavaUpdateSched - reg_sz - C:\Program
Files\Java\jre1.5.0_10\bin\jusched.exe
VirusScan Online - reg_sz - C:\Program Files\McAfee.com\VSO\mcvsshld.exe
VSOCheckTask - reg_sz - C:\Progra~1\McAfee.com\VSO\mcmnhndlr.exe /checktask
Windows Defender - reg_sz - C:\program Files\Windows Defender\MSASCui.exe
-hide
zBrowser Launcher - reg_sz - C:\Program Files\Logitech\iTouch\iTouch.exe
-----------------------------------------------------------------------------------------------------------------
in the runservices there is nothing
-----------------------------------------
standard - reg_sz - No Value
------------------------------------------
i only found 3 .sys u gave up sir,
C:\Windows\System32\drivers\sfsync02.sys
C:\Windows\System32\drivers\sfhIpo2.sys
C:\Windows\System32\drivers\sfdrvo1.sys

ok sir your up again and i'll be eager waiting on the next fase of this
endevor lmfao
in the meanwhile i'll do a new fullsystemscan for invaders.
Georges

ok nass, np mate i'm 1 hour ahead of ya so i know wthat u talking about but u
just gave me a handfull so the items requested will be in by tomorow. Thanks
again for the great help here just
can't figure why these people in the Benelux MS office did'n tell me all
this? but hey i' m just greatfull
for the help i can get on this.

in my eventvw i get the error in WinMgmt
then DCOM, sfsync02, a waring in yellow for DHCP and that is all
:

did that nass and no X or yellow tabs in there. S i guess the faulty mem chip
crippled my board at the same time huh??

The sfsynco2.sys is for a File protection software called StarForce
Protection Synchronization Driver, do you have this installed?.
If yes then uninstall it and delete all traces for it from here:
C:\Windows\System32\drivers\sfsync02.sys
C:\Windows\System32\drivers\sfhIpo2.sys
C:\Windows\System32\drivers\sfhIp01.sys
C:\Windows\System32\drivers\sfdrvo1.sys
C:\Windows\System32\drivers\prodrvo6.sys
C:\Windows\System32\drivers\prohIp02.sys
Then Right click on your My Computer and select properties then click on
Hardware Tab then on Device Manager there under Unplug and Play expand it and
if the StarForce there Remove it.

I Need you to look in these Keys:
By opening a run command and type in :
regedit.exe click [OK]
On the Registry Editor locate this Keys:
[-]HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run = Look
in the Right Pane/Window for the Running Processes write them down and post
them in your next post.
[-]HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunServices
= look for them and write them down and post them in your next post.
After uninstall the StarForce Reboot and do a scan for malwares and Viruses
again please.
It is too late here in the UK, If I didn't come back to that mean tomorrow.
HTH.
Regards,
nass
-------
www.nasstec.co.uk

Also download this and run it to clean the Hives in the registry:
http://www.microsoft.com/downloads/...b570-42470e2f3582&displaylang=en&Hash=SY534SC

 

[Guest]

in the Run Right Pane View is the following
-----------------------------------------------------------------------------------------------------------------
(standaard) - reg_sz - no value
BluetoothAuthentication Agent - reg_sz - rundll32.exe
bthprops.cpl,,BluetoothAuthenticationAgent
KernelFaultCheck - reg_expand_sz - %systemroot%\system32\dump 0 -k
Logitech Hardware Abstraction Layer - reg_sz - KHALMNPR.EXE
LogitechVideoRepair - reg_sz - E:\progfiles\logitech\video\ISStart.exe
LogitechVideoTray - reg_sz - E:\progfiles\logitech\video\logiTray.exe
MCAgentExe - reg_sz - c:\progra~1\mcafee.com\agent\mcagent.exe
MCUpdate - reg_sz - c:\progra~1\mcafee.com\agent\mcupdate.exe
Nerofiltercheck - reg_sz - c:\program files\commo
files\Ahead\lib\NeroCheck.exe
NvCplDaemon - reg_sz - RUDLL32.exe C:\windows\system32\NvCpl.dll,NvStartup
NvMediacenter - reg_sz - RunDLL32.exe NvMCTray.dll,NvTaskbarInit
OASClnt - reg_sz - C:\Program Files\McAfee.com\VSO\oasclnt.exe
Soundman - reg_sz - SOUNDMAN.EXE
SunJavaUpdateSched - reg_sz - C:\Program
Files\Java\jre1.5.0_10\bin\jusched.exe
VirusScan Online - reg_sz - C:\Program Files\McAfee.com\VSO\mcvsshld.exe
VSOCheckTask - reg_sz - C:\Progra~1\McAfee.com\VSO\mcmnhndlr.exe /checktask
Windows Defender - reg_sz - C:\program Files\Windows Defender\MSASCui.exe
-hide
zBrowser Launcher - reg_sz - C:\Program Files\Logitech\iTouch\iTouch.exe
-----------------------------------------------------------------------------------------------------------------
in the runservices there is nothing
-----------------------------------------
standard - reg_sz - No Value
------------------------------------------
i only found 3 .sys u gave up sir,
C:\Windows\System32\drivers\sfsync02.sys
C:\Windows\System32\drivers\sfhIpo2.sys
C:\Windows\System32\drivers\sfdrvo1.sys

ok sir your up again and i'll be eager waiting on the next fase of this
endevor lmfao
in the meanwhile i'll do a new fullsystemscan for invaders.
Georges

Hi Georges,
All looks okay but I have preservation about :
Logitech Hardware Abstraction Layer :
This for your mouse to configure

NvCplDaemon ;
This for your Display Card by nVidia

Try to uninstall the Windows Defender and Download the new release from the
below link:
http://www.microsoft.com/downloads/...E7-DA2B-4A6A-AFA4-F7F14E605A0D&displaylang=en

And also Run this Tool to see which Program is taking the CPU usage and
lagging your System:
http://www.microsoft.com/downloads/...b570-42470e2f3582&displaylang=en&Hash=SY534SC

Remove the entries for the StarForce Driver:

C:\Windows\System32\drivers\sfsync02.sys
C:\Windows\System32\drivers\sfhIpo2.sys
C:\Windows\System32\drivers\sfdrvo1.sys

Reboot your computer and see if you will get an Error or you will get to
shape.
If no joy then Uncheck the Daemon tool, the Bluetooth and the Nero from
start up by starting clean Boot.
To do that Open a run command and type in:
msconfig click [OK] and on the system Configuration window click StartUp
Tab and uncheck the Check box/Line for them and Reboot your machine.
If the Error gone then try to check back the Boxes one-by-one and see which
program will cause the Error to come back.
HTH.
Let us know.
Regards,
nass

ok nass, np mate i'm 1 hour ahead of ya so i know wthat u talking about but u
just gave me a handfull so the items requested will be in by tomorow. Thanks
again for the great help here just
can't figure why these people in the Benelux MS office did'n tell me all
this? but hey i' m just greatfull
for the help i can get on this.

:

in my eventvw i get the error in WinMgmt
then DCOM, sfsync02, a waring in yellow for DHCP and that is all
:

did that nass and no X or yellow tabs in there. S i guess the faulty mem chip
crippled my board at the same time huh??

The sfsynco2.sys is for a File protection software called StarForce
Protection Synchronization Driver, do you have this installed?.
If yes then uninstall it and delete all traces for it from here:
C:\Windows\System32\drivers\sfsync02.sys
C:\Windows\System32\drivers\sfhIpo2.sys
C:\Windows\System32\drivers\sfhIp01.sys
C:\Windows\System32\drivers\sfdrvo1.sys
C:\Windows\System32\drivers\prodrvo6.sys
C:\Windows\System32\drivers\prohIp02.sys
Then Right click on your My Computer and select properties then click on
Hardware Tab then on Device Manager there under Unplug and Play expand it and
if the StarForce there Remove it.

I Need you to look in these Keys:
By opening a run command and type in :
regedit.exe click [OK]
On the Registry Editor locate this Keys:
[-]HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run = Look
in the Right Pane/Window for the Running Processes write them down and post
them in your next post.
[-]HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunServices
= look for them and write them down and post them in your next post.
After uninstall the StarForce Reboot and do a scan for malwares and Viruses
again please.
It is too late here in the UK, If I didn't come back to that mean tomorrow.
HTH.
Regards,
nass
-------
www.nasstec.co.uk

Also download this and run it to clean the Hives in the registry:
http://www.microsoft.com/downloads/...b570-42470e2f3582&displaylang=en&Hash=SY534SC