Format and reinstall winxp pro

[Robert]

Could someone please tell me where I can find step by step instructions on
how to format the hard drive and then reinstall winxp pro.

 

[JS]

From Michael Steven's: http://www.michaelstevenstech.com/cleanxpinstall.html
Also: http://windowsxp.mvps.org/XPClean.htm
and: http://www.theeldergeek.com/clean_installation_of_windows_xp.htm

JS

 

[Bruce Chambers]

Could someone please tell me where I can find step by step instructions on
how to format the hard drive and then reinstall winxp pro.

Simply boot from the WinXP installation CD. You'll be offered the
opportunity to delete, create, and format partitions as part of the
installation process. (You may need to re-arrange the order of boot
devices in the PC's BIOS to boot from the CD.)

HOW TO Install Windows XP
http://support.microsoft.com/default.aspx?scid=KB;en-us;316941

http://www.michaelstevenstech.com/cleanxpinstall.html

http://www.webtree.ca/windowsxp/clean_install.htm


--

Bruce Chambers

Help us help you:



They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety. -Benjamin Franklin

Many people would rather die than think; in fact, most do. -Bertrum Russell

 

[Dave Patrick]

To do a clean install, boot the Windows XP install CD-Rom. Setup inspects
your computer's hardware configuration and then begins to install the setup
and driver files. When the Windows XP Professional screen appears, press
ENTER to set up Windows XP Professional.

(Note: If your drive controller is not natively supported then you'll want
to boot the Windows XP CD-Rom. Then *F6* very early and very important (at
setup is inspecting your system) in the setup to prevent drive controller
detection, and select S to specify additional drivers. Then later you'll be
prompted to insert the manufacturer supplied Windows XP driver for your
drive controller in drive "A")

Read the license agreement, and then press the F8 key to accept the terms of
the license agreement and continue the installation.

When the Windows XP Professional Setup screen appears, all the existing
partitions and the unpartitioned spaces are listed for each physical hard
disk. Use the ARROW keys to select the partitions Press D to delete an
existing partition, If you press D to delete an existing partition, you must
then press L (or press ENTER, and then press L if it is the System
partition) to confirm that you want to delete the partition. Repeat this
step for each of the existing partitions When all the partitions are deleted
press F3 to exit setup, (to avoid unexpected drive letter assignments with
your new install) then restart the pc then when you get to this point in
setup again select the unpartitioned space, and then press C to create a new
partition and specify the size (if required). Windows will by default use
all available space.

Be sure to apply SP2 or at least these two below to your new install before
connecting to any network. Internet included. (sasser, msblast)
http://www.microsoft.com/downloads/...be-3b8e-4f30-8245-9e368d3cdb5a&displaylang=en

http://www.microsoft.com/technet/security/bulletin/MS03-043.mspx
http://www.microsoft.com/technet/security/bulletin/MS03-049.mspx

--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
| Could someone please tell me where I can find step by step instructions on
| how to format the hard drive and then reinstall winxp pro.
|
|

 

[Plato]

Could someone please tell me where I can find step by step instructions on
how to format the hard drive and then reinstall winxp pro.

http://www.bootdisk.com/