R
Ray
I tried to create backup image of my computer without success using Ghost
2003 and looking forward to any assistance from experienced members.
Hardware in use:-
1. Toshiba R150 NB
2. USB 1.1 bootable floppy drive
3. HP 8100 IDE CD Writer Plus + USB 2.0/1.1 to IDE adapter
Software in use:-
1. Standard bootable floppy disk created by Ghost 2003
Options selected: USB support - UHCI driver, assign DOS floppy
driver name and PC DOS
When I boot the disk, it ran smoothly and opened Ghost successfully.
However, when I selected Local->Disk->To Image and select local source
drive. In the Look in, there is only A: Local drive and the CD Writer did
not show up. Can someone advise the possible causes and fixes so I can go
forward.
I note that after I quitted Ghost, I pressed Ctrl + Alt + Del the system
rebooted to the CD Writer if I removed the bootable disk from the floppy
drive. It seems the CD Writer was successfully connected but just did not
appear.
Thanks,
Ray
2003 and looking forward to any assistance from experienced members.
Hardware in use:-
1. Toshiba R150 NB
2. USB 1.1 bootable floppy drive
3. HP 8100 IDE CD Writer Plus + USB 2.0/1.1 to IDE adapter
Software in use:-
1. Standard bootable floppy disk created by Ghost 2003
Options selected: USB support - UHCI driver, assign DOS floppy
driver name and PC DOS
When I boot the disk, it ran smoothly and opened Ghost successfully.
However, when I selected Local->Disk->To Image and select local source
drive. In the Look in, there is only A: Local drive and the CD Writer did
not show up. Can someone advise the possible causes and fixes so I can go
forward.
I note that after I quitted Ghost, I pressed Ctrl + Alt + Del the system
rebooted to the CD Writer if I removed the bootable disk from the floppy
drive. It seems the CD Writer was successfully connected but just did not
appear.
Thanks,
Ray