extreemly slow XP clients

G

Guest

I have a network of 25 user. every one using win2k except 2 clients using XP.
the DC is win2K3 and every thing is good including cable and switches. the XP
clients are normally very slow and some time freeze if I try to access maped
drives. this is causing a huge problem becouse these are brand new computers
and still dont work properly.

Please can some one help
 
M

Malke

Amad said:
I have a network of 25 user. every one using win2k except 2 clients
using XP. the DC is win2K3 and every thing is good including cable and
switches. the XP clients are normally very slow and some time freeze
if I try to access maped drives. this is causing a huge problem
becouse these are brand new computers and still dont work properly.

Please can some one help

Slow logons are usually caused by incorrect DNS settings. Here are some
links and information from MVP Ron Lowe:

XP differs from previous versions of windows in that it uses DNS as it's
primary name resolution method for finding domain controllers:

If DNS is misconfigured, XP will spend a lot of time waiting for it to
timeout before it tries using legacy NT4 sytle NetBIOS. ( Which may or
may not work. )

1) Ensure that the XP clients are all configured to point to the local
DNS server which hosts the AD domain. That will probably be the Win2k
server itself. They should NOT be pointing to an ISP's DNS server. An
'ipconfig /all' on the XP box should reveal ONLY the domain's DNS
server. You should use the DHCP server to push out the local DNS server
address.

2) Ensure DNS server on Win2k is configured to permit dynamic updates.

3) Ensure the Win2k server points to itself as a DNS server.

4) For external ( internet ) name resolution, specify your ISP's DNS
server not on the clients, but in the 'forwarders' tab of the local
Win2k DNS server.

On the DNS server, if you cannot access the 'Forwarders' and 'Root
Hints' tabs because they are greyed out, that is because there is a
root zone (".") present on the DNS server. You MUST delete this root
zone to permit the server to forward unresolved queries to yout ISP or
the root servers. Accept any nags etc, and let it delete any
corresponding reverse lookup zones if it asks.

How Domain Controllers Are Located in Windows XP -
http://support.microsoft.com/default.aspx?scid=kb;en-us;314861
Setting Up the Domain Name System for Active Directory -
http://support.microsoft.com/default.aspx?scid=kb;en-us;237675
HOW TO: Configure DNS for Internet Access in Windows 2000 -
http://support.microsoft.com/default.aspx?scid=kb;en-us;300202
DNS and AD FAQs - http://support.microsoft.com/?id=291382

Malke
 
K

Kerry Brown

Amad Malik said:
I have a network of 25 user. every one using win2k except 2 clients using
XP.
the DC is win2K3 and every thing is good including cable and switches. the
XP
clients are normally very slow and some time freeze if I try to access
maped
drives. this is causing a huge problem becouse these are brand new
computers
and still dont work properly.

Please can some one help

It may be a known problem you are experiencing.

http://support.microsoft.com/default.aspx?scid=kb;en-us;885189

I have also seen this happen when the root folder of the mapped drive and
any folders one level down contain a lot (thousands) of files. XP parses all
the file names in the root and also one level down when accessing a mapped
drive. Sometimes using UNC names instead of a mapped drive solves this. It
depends on the program accessing the share. If using UNC names doesn't work
the only workaround I've found is to move some files.

Another problem is mapped drives that are not available. For some reason
when accessing a mapped drive XP will sometimes check all the other mapped
drives as well. Delete any mapped drives that are not needed. Also go into
the My Network Places folder on an affected computer and remove everything
in there that is not needed. If there is a mapped drive or a Network Place
that is not available XP waits for the search to time out before it displays
the folder you are trying to access. Again this seems to be an intermittant
problem not affecting all clients.

Kerry
 
G

Guest

Thank you all for your responce. I have tryied everything but still no luck.
Please tell me if you have any more information. it seems that every time I
make a change or just restart the computer it works fine. even if I login as
administrator it works fine but administrator don't have any drives maped so
that could be a issue becouse it seems that the clients cant access only a
few PC's on the network. Restart the system or login as administrator and
every thing is fine for some time.
 
M

Malke

Amad said:
Thank you all for your responce. I have tryied everything but still no
luck. Please tell me if you have any more information. it seems that
every time I make a change or just restart the computer it works fine.
even if I login as administrator it works fine but administrator don't
have any drives maped so that could be a issue becouse it seems that
the clients cant access only a few PC's on the network. Restart the
system or login as administrator and every thing is fine for some
time.

You need to look at what your users have mapped, then. It sounds like
the workstations are trying to access something on the network that is
either unavailable or to which the users don't have proper access
permissions and it is timing out. Since this is a business, you will
probably find it more efficient to have an outside professional
computer network consultant come in and have a look. Someone on-site is
going to be able to pinpoint the issue(s) far quicker and more
accurately than people in a newsgroup. This is a cost of doing business
and well worth it.

Malke
 
G

Guest

thank you all fo you help. I think kelly'slittle XP twike worked out. it
didnt wokrd first time but later when I restarted the system and tryed again
it worked and now both computers are fine.

thanks all of you guys and the DNS tip was also very helpfull it helped on
another occasion.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top