J
Jim
While copying files from one RAID to another I get Event
ID 11 (The device detected a controller error on
\Device\Scsi\adpu160m2.) and Event 51 (An error was
detected on device \Device\Harddisk6\DR6 during a paging
operation.) These are IDE to SCSI 12-bay RAID and on a
dual channel Adaptec 39160 SCSI controller. I have made
sure the SCSI card driver is up to date and have not been
able to isolate the problem.
A secondary problem is the server reporting "at near
capacity" event 2013 and the disk has plenty of space.
The file server is a Pentium 4 2.8Ghz (800Mhz FSB) with
1GB of RAM on a Windows 2000 Server OS. I have to HT
disabled in the BIOS.
Any ideas will be greatly appreciated.
Thanks in advance.
Jim
ID 11 (The device detected a controller error on
\Device\Scsi\adpu160m2.) and Event 51 (An error was
detected on device \Device\Harddisk6\DR6 during a paging
operation.) These are IDE to SCSI 12-bay RAID and on a
dual channel Adaptec 39160 SCSI controller. I have made
sure the SCSI card driver is up to date and have not been
able to isolate the problem.
A secondary problem is the server reporting "at near
capacity" event 2013 and the disk has plenty of space.
The file server is a Pentium 4 2.8Ghz (800Mhz FSB) with
1GB of RAM on a Windows 2000 Server OS. I have to HT
disabled in the BIOS.
Any ideas will be greatly appreciated.
Thanks in advance.
Jim