DRIVER_UNLOADED_WITHOUT_CANELLING_PENDING_OPERATIONS

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

when I try to do a clean XP installation on my hdd, after accepting the F8,
somewhere along the line I get this error
"DRIVER_UNLOADED_WITHOUT_CANELLING_PENDING_OPERATIONS". The hdd is an old one
but I reformat it before the installation. Any idea what is wrong with it?
Thanks
 
The original OS is not win XP. The problem been resolved because of the
failure of the cd rom drive. After changing the cd rom drive, the
installation was able to complete and I was able to the WU/activate. After
that However, discovered that in order to boot up, the XP cd must be inside
the cd rom driver, otherwise it will
not boot up, even though the first boot is hd.

It will only boot up with the xp inside and not hitting any key when asked.
Why is that the xp cd must be inside even when first boot is hdd? Any idea to
resolve the issue is much appreciated as it driving us nuts, thanks
 
Christine

How do you know this "when first boot is hdd"? Have you made changes in
the BIOS? The hard drive is normally second or third in the boot
sequence after the floppy and or the CD drive.

Try Start, Run, type msconfig and hit ENTER. Copy the details of what
appears in the boot.ini tab and post the information here.

What was the original OS? How is your Windows XP CD described on the
face of the CD?


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
 
Bios set to 1st boot as Atapi cd rom, then hdd and also try to set as hdd,
cd rom.- all give the same message. The 3rd boot is disabled/grayout

Here is the boot.ini details

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating system]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home
Edition"[/noexecute=optin /fastdetect

Seems strange when I do a search for BOOT.INI file (including hidden
files)- result nothing.
Thanks for your time.
 
Found the Boot.ini and after that did a fixboot through the Recovery Console
but the problem remains the same. That is it will not boot if there is no XP
in the cd rom drive (irrespective of the priority boot)........... why
..why...thanks

christine said:
Bios set to 1st boot as Atapi cd rom, then hdd and also try to set as hdd,
cd rom.- all give the same message. The 3rd boot is disabled/grayout

Here is the boot.ini details

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating system]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home
Edition"[/noexecute=optin /fastdetect

Seems strange when I do a search for BOOT.INI file (including hidden
files)- result nothing.
Thanks for your time.


Gerry said:
Christine

How do you know this "when first boot is hdd"? Have you made changes in
the BIOS? The hard drive is normally second or third in the boot
sequence after the floppy and or the CD drive.

Try Start, Run, type msconfig and hit ENTER. Copy the details of what
appears in the boot.ini tab and post the information here.

What was the original OS? How is your Windows XP CD described on the
face of the CD?


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
 
Problem resolved through some settings in the bios. However another problem
crop up even before I settle the boot problem. Now, when I shut down the pc
start>turn off >turn off, the pc will shut down but it will immediately
restart and back up to desktop. I dont remember making changes other than
those to solve the boot problem. How can I stop the pc from rebooting by
itself.


christine said:
Found the Boot.ini and after that did a fixboot through the Recovery Console
but the problem remains the same. That is it will not boot if there is no XP
in the cd rom drive (irrespective of the priority boot)........... why
.why...thanks

christine said:
Bios set to 1st boot as Atapi cd rom, then hdd and also try to set as hdd,
cd rom.- all give the same message. The 3rd boot is disabled/grayout

Here is the boot.ini details

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating system]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home
Edition"[/noexecute=optin /fastdetect

Seems strange when I do a search for BOOT.INI file (including hidden
files)- result nothing.
Thanks for your time.


Gerry said:
Christine

How do you know this "when first boot is hdd"? Have you made changes in
the BIOS? The hard drive is normally second or third in the boot
sequence after the floppy and or the CD drive.

Try Start, Run, type msconfig and hit ENTER. Copy the details of what
appears in the boot.ini tab and post the information here.

What was the original OS? How is your Windows XP CD described on the
face of the CD?


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~


christine wrote:
The original OS is not win XP. The problem been resolved because of
the failure of the cd rom drive. After changing the cd rom drive, the
installation was able to complete and I was able to the WU/activate.
After that However, discovered that in order to boot up, the XP cd
must be inside the cd rom driver, otherwise it will
not boot up, even though the first boot is hd.

It will only boot up with the xp inside and not hitting any key when
asked. Why is that the xp cd must be inside even when first boot is
hdd? Any idea to resolve the issue is much appreciated as it driving
us nuts, thanks

:

Christine

New Stop Error to me:
http://msdn2.microsoft.com/en-us/library/ms797129.aspx

Why are you trying a new clean installation of XP?

How is your Windows XP CD described on the face of theCD? Doesn't the
error message name the driver?

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
christine wrote:
when I try to do a clean XP installation on my hdd, after accepting
the F8, somewhere along the line I get this error
"DRIVER_UNLOADED_WITHOUT_CANELLING_PENDING_OPERATIONS". The hdd is
an old one but I reformat it before the installation. Any idea what
is wrong with it? Thanks
 
Christine

There is a section on this web page that may help:
http://aumha.org/win5/a/shtdwnxp.htm

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
christine said:
Problem resolved through some settings in the bios. However another
problem crop up even before I settle the boot problem. Now, when I
shut down the pc start>turn off >turn off, the pc will shut down but
it will immediately restart and back up to desktop. I dont remember
making changes other than those to solve the boot problem. How can I
stop the pc from rebooting by itself.


christine said:
Found the Boot.ini and after that did a fixboot through the Recovery
Console but the problem remains the same. That is it will not boot
if there is no XP in the cd rom drive (irrespective of the priority
boot)........... why .why...thanks

christine said:
Bios set to 1st boot as Atapi cd rom, then hdd and also try to set
as hdd, cd rom.- all give the same message. The 3rd boot is
disabled/grayout

Here is the boot.ini details

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating system]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP
Home Edition"[/noexecute=optin /fastdetect

Seems strange when I do a search for BOOT.INI file (including
hidden files)- result nothing.
Thanks for your time.


:

Christine

How do you know this "when first boot is hdd"? Have you made
changes in the BIOS? The hard drive is normally second or third in
the boot sequence after the floppy and or the CD drive.

Try Start, Run, type msconfig and hit ENTER. Copy the details of
what appears in the boot.ini tab and post the information here.

What was the original OS? How is your Windows XP CD described on
the face of the CD?


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~


christine wrote:
The original OS is not win XP. The problem been resolved because
of the failure of the cd rom drive. After changing the cd rom
drive, the installation was able to complete and I was able to
the WU/activate. After that However, discovered that in order to
boot up, the XP cd must be inside the cd rom driver, otherwise it
will
not boot up, even though the first boot is hd.

It will only boot up with the xp inside and not hitting any key
when asked. Why is that the xp cd must be inside even when first
boot is hdd? Any idea to resolve the issue is much appreciated as
it driving us nuts, thanks

:

Christine

New Stop Error to me:
http://msdn2.microsoft.com/en-us/library/ms797129.aspx

Why are you trying a new clean installation of XP?

How is your Windows XP CD described on the face of theCD?
Doesn't the error message name the driver?

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
christine wrote:
when I try to do a clean XP installation on my hdd, after
accepting the F8, somewhere along the line I get this error
"DRIVER_UNLOADED_WITHOUT_CANELLING_PENDING_OPERATIONS". The hdd
is an old one but I reformat it before the installation. Any
idea what is wrong with it? Thanks
 
Problem resolved (acpi -wake on lan from S5 -disabled) and many thanks for
directing me to aumha website

Gerry said:
Christine

There is a section on this web page that may help:
http://aumha.org/win5/a/shtdwnxp.htm

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
christine said:
Problem resolved through some settings in the bios. However another
problem crop up even before I settle the boot problem. Now, when I
shut down the pc start>turn off >turn off, the pc will shut down but
it will immediately restart and back up to desktop. I dont remember
making changes other than those to solve the boot problem. How can I
stop the pc from rebooting by itself.


christine said:
Found the Boot.ini and after that did a fixboot through the Recovery
Console but the problem remains the same. That is it will not boot
if there is no XP in the cd rom drive (irrespective of the priority
boot)........... why .why...thanks

:

Bios set to 1st boot as Atapi cd rom, then hdd and also try to set
as hdd, cd rom.- all give the same message. The 3rd boot is
disabled/grayout

Here is the boot.ini details

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating system]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP
Home Edition"[/noexecute=optin /fastdetect

Seems strange when I do a search for BOOT.INI file (including
hidden files)- result nothing.
Thanks for your time.


:

Christine

How do you know this "when first boot is hdd"? Have you made
changes in the BIOS? The hard drive is normally second or third in
the boot sequence after the floppy and or the CD drive.

Try Start, Run, type msconfig and hit ENTER. Copy the details of
what appears in the boot.ini tab and post the information here.

What was the original OS? How is your Windows XP CD described on
the face of the CD?


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~


christine wrote:
The original OS is not win XP. The problem been resolved because
of the failure of the cd rom drive. After changing the cd rom
drive, the installation was able to complete and I was able to
the WU/activate. After that However, discovered that in order to
boot up, the XP cd must be inside the cd rom driver, otherwise it
will
not boot up, even though the first boot is hd.

It will only boot up with the xp inside and not hitting any key
when asked. Why is that the xp cd must be inside even when first
boot is hdd? Any idea to resolve the issue is much appreciated as
it driving us nuts, thanks

:

Christine

New Stop Error to me:
http://msdn2.microsoft.com/en-us/library/ms797129.aspx

Why are you trying a new clean installation of XP?

How is your Windows XP CD described on the face of theCD?
Doesn't the error message name the driver?

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
christine wrote:
when I try to do a clean XP installation on my hdd, after
accepting the F8, somewhere along the line I get this error
"DRIVER_UNLOADED_WITHOUT_CANELLING_PENDING_OPERATIONS". The hdd
is an old one but I reformat it before the installation. Any
idea what is wrong with it? Thanks
 
Christine

Excellent news. Thanks for reporting the outcome.


--
Regards.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
Problem resolved (acpi -wake on lan from S5 -disabled) and many
thanks for directing me to aumha website

Gerry said:
Christine

There is a section on this web page that may help:
http://aumha.org/win5/a/shtdwnxp.htm

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
christine said:
Problem resolved through some settings in the bios. However another
problem crop up even before I settle the boot problem. Now, when I
shut down the pc start>turn off >turn off, the pc will shut down but
it will immediately restart and back up to desktop. I dont remember
making changes other than those to solve the boot problem. How can I
stop the pc from rebooting by itself.


:

Found the Boot.ini and after that did a fixboot through the
Recovery Console but the problem remains the same. That is it will
not boot if there is no XP in the cd rom drive (irrespective of
the priority boot)........... why .why...thanks

:

Bios set to 1st boot as Atapi cd rom, then hdd and also try to set
as hdd, cd rom.- all give the same message. The 3rd boot is
disabled/grayout

Here is the boot.ini details

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating system]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP
Home Edition"[/noexecute=optin /fastdetect

Seems strange when I do a search for BOOT.INI file (including
hidden files)- result nothing.
Thanks for your time.


:

Christine

How do you know this "when first boot is hdd"? Have you made
changes in the BIOS? The hard drive is normally second or third
in the boot sequence after the floppy and or the CD drive.

Try Start, Run, type msconfig and hit ENTER. Copy the details of
what appears in the boot.ini tab and post the information here.

What was the original OS? How is your Windows XP CD described on
the face of the CD?


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~


christine wrote:
The original OS is not win XP. The problem been resolved
because of the failure of the cd rom drive. After changing the
cd rom drive, the installation was able to complete and I was
able to the WU/activate. After that However, discovered that in
order to boot up, the XP cd must be inside the cd rom driver,
otherwise it will
not boot up, even though the first boot is hd.

It will only boot up with the xp inside and not hitting any key
when asked. Why is that the xp cd must be inside even when first
boot is hdd? Any idea to resolve the issue is much appreciated
as it driving us nuts, thanks

:

Christine

New Stop Error to me:
http://msdn2.microsoft.com/en-us/library/ms797129.aspx

Why are you trying a new clean installation of XP?

How is your Windows XP CD described on the face of theCD?
Doesn't the error message name the driver?

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
christine wrote:
when I try to do a clean XP installation on my hdd, after
accepting the F8, somewhere along the line I get this error
"DRIVER_UNLOADED_WITHOUT_CANELLING_PENDING_OPERATIONS". The
hdd is an old one but I reformat it before the installation.
Any idea what is wrong with it? Thanks
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top