Downloading /Installing SpywareBlaster

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hi,

I have been trying to install Spyware Blaster onto my PC but I am getting a
confusing error message and having to abort in the middle of the
installation. My system still runs the same so it doesnt seem as if it is
corrupted in anyway.

Please can someone help me with this ? :(

Thank you
 
Forgot to put my error message in sorry :(

" Error
C:\windows\system32\ms\net.ocx
The existing file is marked as read only.
Click retry to remove the read only attribute and try again ignore and skip
this file or abort to cancle installation.

please help
(as you can see I dont know what I am doing )
 
KMJR said:
Forgot to put my error message in sorry :(

" Error
C:\windows\system32\ms\net.ocx
The existing file is marked as read only.
Click retry to remove the read only attribute and try again ignore and skip
this file or abort to cancle installation.

please help
(as you can see I dont know what I am doing )
Click to expand...

Hi,
This file it doesn't seem right to me!, try to Rename it to this:
C:\windows\system32\ms\net.ocxOLD and Reboot your computer and see f you
will be able to install spywareBlaster.
Also you can Run Disk Clean and then run this command:
sfc /scannow click [OK] and try the installation.
HTH.
nass
 
KMJR said:
Forgot to put my error message in sorry :(

" Error
C:\windows\system32\ms\net.ocx
The existing file is marked as read only.
Click retry to remove the read only attribute and try again ignore
and skip this file or abort to cancle installation.

please help
(as you can see I dont know what I am doing )
Click to expand...

You might get faster help in this forum
http://www.javacoolsoftware.info/kb/idx/0/079/article/?pt_sid=de64ebe16b82cc
450b6f94f2270e117c

Good Luck!
 
Hi Nass,

I did type the file wrong it ended with system32\msinet.ocx should I still
try and rename it still.

Ta :)

--
Testdrive


nass said:
KMJR said:
Forgot to put my error message in sorry :(

" Error
C:\windows\system32\ms\net.ocx
The existing file is marked as read only.
Click retry to remove the read only attribute and try again ignore and skip
this file or abort to cancle installation.

please help
(as you can see I dont know what I am doing )
Click to expand...

Hi,
This file it doesn't seem right to me!, try to Rename it to this:
C:\windows\system32\ms\net.ocxOLD and Reboot your computer and see f you
will be able to install spywareBlaster.
Also you can Run Disk Clean and then run this command:
sfc /scannow click [OK] and try the installation.
HTH.
nass
Click to expand...
 
Hi KMJR,
My worries is, you are infected with malware and instead of cleaning them we
will spread them further?.
Try the installation in safe mode by copying the Application to a folder on
your computer and Reboot into safe mode and try the installation then run a
scan there.
If you will not be able to copy or run in safe mode try this:
Open a run command and type in:
regsvr32 C:\WINDOWS\system32\MSINET.OCX click [OK]
regsvr32 C:\Windows\System32\MSHFLXGD.OCX click [OK]

Reboot your machine and try the installation, does it help?.

The file should be here in this key
[-]HKEY_CLASSES_ROOT\TypeLib\{48E59290-9880-11CF-9754-00AA00C00908}\1.0\0\win32
(Default) REG_SZ C:\Windows\System32\msinet.ocx

Also try the other instructions in the other post.
HTH.
Let us know.
nass
-----
www.nasstec.co.uk
KMJR said:
Hi Nass,

I did type the file wrong it ended with system32\msinet.ocx should I still
try and rename it still.

Ta :)

--
Testdrive


nass said:
KMJR said:
Forgot to put my error message in sorry :(

" Error
C:\windows\system32\ms\net.ocx
The existing file is marked as read only.
Click retry to remove the read only attribute and try again ignore and skip
this file or abort to cancle installation.

please help
(as you can see I dont know what I am doing )


--
Testdrive


:

Hi,

I have been trying to install Spyware Blaster onto my PC but I am getting a
confusing error message and having to abort in the middle of the
installation. My system still runs the same so it doesnt seem as if it is
corrupted in anyway.

Please can someone help me with this ? :(

Thank you
Click to expand...

Hi,
This file it doesn't seem right to me!, try to Rename it to this:
C:\windows\system32\ms\net.ocxOLD and Reboot your computer and see f you
will be able to install spywareBlaster.
Also you can Run Disk Clean and then run this command:
sfc /scannow click [OK] and try the installation.
HTH.
nass
Click to expand...
Click to expand...
 
Hi Nass,

I ran both files the first one seemed to have went ok but I received a
message on the second the specified module could not be found

Please advise
--
Testdrive


nass said:
Hi KMJR,
My worries is, you are infected with malware and instead of cleaning them we
will spread them further?.
Try the installation in safe mode by copying the Application to a folder on
your computer and Reboot into safe mode and try the installation then run a
scan there.
If you will not be able to copy or run in safe mode try this:
Open a run command and type in:
regsvr32 C:\WINDOWS\system32\MSINET.OCX click [OK]
regsvr32 C:\Windows\System32\MSHFLXGD.OCX click [OK]

Reboot your machine and try the installation, does it help?.

The file should be here in this key:
[-]HKEY_CLASSES_ROOT\TypeLib\{48E59290-9880-11CF-9754-00AA00C00908}\1.0\0\win32
(Default) REG_SZ C:\Windows\System32\msinet.ocx

Also try the other instructions in the other post.
HTH.
Let us know.
nass
-----
www.nasstec.co.uk
KMJR said:
Hi Nass,

I did type the file wrong it ended with system32\msinet.ocx should I still
try and rename it still.

Ta :)

--
Testdrive


nass said:
:

Forgot to put my error message in sorry :(

" Error
C:\windows\system32\ms\net.ocx
The existing file is marked as read only.
Click retry to remove the read only attribute and try again ignore and skip
this file or abort to cancle installation.

please help
(as you can see I dont know what I am doing )


--
Testdrive


:

Hi,

I have been trying to install Spyware Blaster onto my PC but I am getting a
confusing error message and having to abort in the middle of the
installation. My system still runs the same so it doesnt seem as if it is
corrupted in anyway.

Please can someone help me with this ? :(

Thank you
--
Testdrive

Hi,
This file it doesn't seem right to me!, try to Rename it to this:
C:\windows\system32\ms\net.ocxOLD and Reboot your computer and see f you
will be able to install spywareBlaster.
Also you can Run Disk Clean and then run this command:
sfc /scannow click [OK] and try the installation.
HTH.
nass
Click to expand...
Click to expand...
Click to expand...
 
Did you tried the installation of spywareblaster?, try the reset of the
steps, rename and run the System File checker (SFC).
Note: you need to Reboot after all these Steps.
HTH.
nass

KMJR said:
Hi Nass,

I ran both files the first one seemed to have went ok but I received a
message on the second the specified module could not be found

Please advise
--
Testdrive


nass said:
Hi KMJR,
My worries is, you are infected with malware and instead of cleaning them we
will spread them further?.
Try the installation in safe mode by copying the Application to a folder on
your computer and Reboot into safe mode and try the installation then run a
scan there.
If you will not be able to copy or run in safe mode try this:
Open a run command and type in:
regsvr32 C:\WINDOWS\system32\MSINET.OCX click [OK]
regsvr32 C:\Windows\System32\MSHFLXGD.OCX click [OK]

Reboot your machine and try the installation, does it help?.

The file should be here in this key:
[-]HKEY_CLASSES_ROOT\TypeLib\{48E59290-9880-11CF-9754-00AA00C00908}\1.0\0\win32
(Default) REG_SZ C:\Windows\System32\msinet.ocx

Also try the other instructions in the other post.
HTH.
Let us know.
nass
-----
www.nasstec.co.uk
KMJR said:
Hi Nass,

I did type the file wrong it ended with system32\msinet.ocx should I still
try and rename it still.

Ta :)

--
Testdrive


:



:

Forgot to put my error message in sorry :(

" Error
C:\windows\system32\ms\net.ocx
The existing file is marked as read only.
Click retry to remove the read only attribute and try again ignore and skip
this file or abort to cancle installation.

please help
(as you can see I dont know what I am doing )


--
Testdrive


:

Hi,

I have been trying to install Spyware Blaster onto my PC but I am getting a
confusing error message and having to abort in the middle of the
installation. My system still runs the same so it doesnt seem as if it is
corrupted in anyway.

Please can someone help me with this ? :(

Thank you
--
Testdrive

Hi,
This file it doesn't seem right to me!, try to Rename it to this:
C:\windows\system32\ms\net.ocxOLD and Reboot your computer and see f you
will be able to install spywareBlaster.
Also you can Run Disk Clean and then run this command:
sfc /scannow click [OK] and try the installation.
HTH.
nass
Click to expand...
Click to expand...
Click to expand...
 
Hi Nass

It's Me again as you can tell by now I am a bit thick when it comes to my pc
why I got one I will never know :)

Anyway I changed the file name within system32 to msinet.ocx old and am
about to do a disk clean up ( when I read how to do it ) I have now been able
to install the spywareBlaster programme I have just one more question will
changing this file name corrupt anything else on my pc or stop something from
working properly cause it was an active x something file.

Thank you very much for all your help and patience with me :)


--
Testdrive


nass said:
Did you tried the installation of spywareblaster?, try the reset of the
steps, rename and run the System File checker (SFC).
Note: you need to Reboot after all these Steps.
HTH.
nass

KMJR said:
Hi Nass,

I ran both files the first one seemed to have went ok but I received a
message on the second the specified module could not be found

Please advise
--
Testdrive


nass said:
Hi KMJR,
My worries is, you are infected with malware and instead of cleaning them we
will spread them further?.
Try the installation in safe mode by copying the Application to a folder on
your computer and Reboot into safe mode and try the installation then run a
scan there.
If you will not be able to copy or run in safe mode try this:
Open a run command and type in:
regsvr32 C:\WINDOWS\system32\MSINET.OCX click [OK]
regsvr32 C:\Windows\System32\MSHFLXGD.OCX click [OK]

Reboot your machine and try the installation, does it help?.

The file should be here in this key:
[-]HKEY_CLASSES_ROOT\TypeLib\{48E59290-9880-11CF-9754-00AA00C00908}\1.0\0\win32
(Default) REG_SZ C:\Windows\System32\msinet.ocx

Also try the other instructions in the other post.
HTH.
Let us know.
nass
-----
www.nasstec.co.uk
:

Hi Nass,

I did type the file wrong it ended with system32\msinet.ocx should I still
try and rename it still.

Ta :)

--
Testdrive


:



:

Forgot to put my error message in sorry :(

" Error
C:\windows\system32\ms\net.ocx
The existing file is marked as read only.
Click retry to remove the read only attribute and try again ignore and skip
this file or abort to cancle installation.

please help
(as you can see I dont know what I am doing )


--
Testdrive


:

Hi,

I have been trying to install Spyware Blaster onto my PC but I am getting a
confusing error message and having to abort in the middle of the
installation. My system still runs the same so it doesnt seem as if it is
corrupted in anyway.

Please can someone help me with this ? :(

Thank you
--
Testdrive

Hi,
This file it doesn't seem right to me!, try to Rename it to this:
C:\windows\system32\ms\net.ocxOLD and Reboot your computer and see f you
will be able to install spywareBlaster.
Also you can Run Disk Clean and then run this command:
sfc /scannow click [OK] and try the installation.
HTH.
nass
Click to expand...
Click to expand...
Click to expand...
 
[MSINET.OCX]: Is Microsoft Internet Transfer Control and part of the
Internet Transfer protocol.
INFO: Files Remaining in NT\SYSTEM32 Folder After VFP6 Removal
http://support.microsoft.com/kb/196708

You can download this cab from here:
http://activex.microsoft.com/controls/vb6/msinet.cab
Then copy and save the msinet.ocx to this path:
C:\Windows\System32\[Copy Here the msinet.ocx]

Open a run command and type in:
regsvr32 msinet.ocx click [OK] and Reboot your machine.

Locate the old msinet.cox old and delete it.
This File been mentioned in may application, MS Office, Protection software,
Internet Transfer Protocol..etc.
HTH.
You are welcome by the way, we all learner!.
Regards,
nass
----
www.nasstec.co.uk

KMJR said:
Hi Nass

It's Me again as you can tell by now I am a bit thick when it comes to my pc
why I got one I will never know :)

Anyway I changed the file name within system32 to msinet.ocx old and am
about to do a disk clean up ( when I read how to do it ) I have now been able
to install the spywareBlaster programme I have just one more question will
changing this file name corrupt anything else on my pc or stop something from
working properly cause it was an active x something file.

Thank you very much for all your help and patience with me :)


--
Testdrive


nass said:
Did you tried the installation of spywareblaster?, try the reset of the
steps, rename and run the System File checker (SFC).
Note: you need to Reboot after all these Steps.
HTH.
nass

KMJR said:
Hi Nass,

I ran both files the first one seemed to have went ok but I received a
message on the second the specified module could not be found

Please advise
--
Testdrive


:


Hi KMJR,
My worries is, you are infected with malware and instead of cleaning them we
will spread them further?.
Try the installation in safe mode by copying the Application to a folder on
your computer and Reboot into safe mode and try the installation then run a
scan there.
If you will not be able to copy or run in safe mode try this:
Open a run command and type in:
regsvr32 C:\WINDOWS\system32\MSINET.OCX click [OK]
regsvr32 C:\Windows\System32\MSHFLXGD.OCX click [OK]

Reboot your machine and try the installation, does it help?.

The file should be here in this key:
[-]HKEY_CLASSES_ROOT\TypeLib\{48E59290-9880-11CF-9754-00AA00C00908}\1.0\0\win32
(Default) REG_SZ C:\Windows\System32\msinet.ocx

Also try the other instructions in the other post.
HTH.
Let us know.
nass
-----
www.nasstec.co.uk
:

Hi Nass,

I did type the file wrong it ended with system32\msinet.ocx should I still
try and rename it still.

Ta :)

--
Testdrive


:



:

Forgot to put my error message in sorry :(

" Error
C:\windows\system32\ms\net.ocx
The existing file is marked as read only.
Click retry to remove the read only attribute and try again ignore and skip
this file or abort to cancle installation.

please help
(as you can see I dont know what I am doing )


--
Testdrive


:

Hi,

I have been trying to install Spyware Blaster onto my PC but I am getting a
confusing error message and having to abort in the middle of the
installation. My system still runs the same so it doesnt seem as if it is
corrupted in anyway.

Please can someone help me with this ? :(

Thank you
--
Testdrive

Hi,
This file it doesn't seem right to me!, try to Rename it to this:
C:\windows\system32\ms\net.ocxOLD and Reboot your computer and see f you
will be able to install spywareBlaster.
Also you can Run Disk Clean and then run this command:
sfc /scannow click [OK] and try the installation.
HTH.
nass
Click to expand...
Click to expand...
Click to expand...
 
Hi Nass

I have clicked on the active x address and have downloaded the msinet but it
has downloaded into winrar and there is already a msinet showing in system32
so I think I am ok

Thanks

--
Testdrive


nass said:
[MSINET.OCX]: Is Microsoft Internet Transfer Control and part of the
Internet Transfer protocol.
INFO: Files Remaining in NT\SYSTEM32 Folder After VFP6 Removal
http://support.microsoft.com/kb/196708

You can download this cab from here:
http://activex.microsoft.com/controls/vb6/msinet.cab
Then copy and save the msinet.ocx to this path:
C:\Windows\System32\[Copy Here the msinet.ocx]

Open a run command and type in:
regsvr32 msinet.ocx click [OK] and Reboot your machine.

Locate the old msinet.cox old and delete it.
This File been mentioned in may application, MS Office, Protection software,
Internet Transfer Protocol..etc.
HTH.
You are welcome by the way, we all learner!.
Regards,
nass
----
www.nasstec.co.uk

KMJR said:
Hi Nass

It's Me again as you can tell by now I am a bit thick when it comes to my pc
why I got one I will never know :)

Anyway I changed the file name within system32 to msinet.ocx old and am
about to do a disk clean up ( when I read how to do it ) I have now been able
to install the spywareBlaster programme I have just one more question will
changing this file name corrupt anything else on my pc or stop something from
working properly cause it was an active x something file.

Thank you very much for all your help and patience with me :)


--
Testdrive


nass said:
Did you tried the installation of spywareblaster?, try the reset of the
steps, rename and run the System File checker (SFC).
Note: you need to Reboot after all these Steps.
HTH.
nass

:

Hi Nass,

I ran both files the first one seemed to have went ok but I received a
message on the second the specified module could not be found

Please advise
--
Testdrive


:


Hi KMJR,
My worries is, you are infected with malware and instead of cleaning them we
will spread them further?.
Try the installation in safe mode by copying the Application to a folder on
your computer and Reboot into safe mode and try the installation then run a
scan there.
If you will not be able to copy or run in safe mode try this:
Open a run command and type in:
regsvr32 C:\WINDOWS\system32\MSINET.OCX click [OK]
regsvr32 C:\Windows\System32\MSHFLXGD.OCX click [OK]

Reboot your machine and try the installation, does it help?.

The file should be here in this key:
[-]HKEY_CLASSES_ROOT\TypeLib\{48E59290-9880-11CF-9754-00AA00C00908}\1.0\0\win32
(Default) REG_SZ C:\Windows\System32\msinet.ocx

Also try the other instructions in the other post.
HTH.
Let us know.
nass
-----
www.nasstec.co.uk
:

Hi Nass,

I did type the file wrong it ended with system32\msinet.ocx should I still
try and rename it still.

Ta :)

--
Testdrive


:



:

Forgot to put my error message in sorry :(

" Error
C:\windows\system32\ms\net.ocx
The existing file is marked as read only.
Click retry to remove the read only attribute and try again ignore and skip
this file or abort to cancle installation.

please help
(as you can see I dont know what I am doing )


--
Testdrive


:

Hi,

I have been trying to install Spyware Blaster onto my PC but I am getting a
confusing error message and having to abort in the middle of the
installation. My system still runs the same so it doesnt seem as if it is
corrupted in anyway.

Please can someone help me with this ? :(

Thank you
--
Testdrive

Hi,
This file it doesn't seem right to me!, try to Rename it to this:
C:\windows\system32\ms\net.ocxOLD and Reboot your computer and see f you
will be able to install spywareBlaster.
Also you can Run Disk Clean and then run this command:
sfc /scannow click [OK] and try the installation.
HTH.
nass
Click to expand...
Click to expand...
Click to expand...
 
if that freeware is so
difficult to install, it may
not be worthwhile to use
it.

there are so many out
there, why not use another
instead?

one can only wonder
what you will go through
after you decide you don't
like and try to uninstall it.


Hi,

I have been trying to install Spyware Blaster onto my PC but I am getting a
confusing error message and having to abort in the middle of the
installation. My system still runs the same so it doesnt seem as if it is
corrupted in anyway.

Please can someone help me with this ? :(

Thank you
 
Back
Top