DNS server with dual IPs - how to setup DNS properly.

[just biz]

I have a W2k3 DC with DNS that has two NICs. I have a separate
firewall, so I wanted to use the dual NICs on the server for
throughput. I assigned separate IPs .254 and .253 to the NICs. I added
two DNS A records so it would use round robin to spread the bandwidth.
I am getting sporatic network problems. I see an error 7062 : The DNS
server encountered a packet addressed to itself on IP address %1.

Each NIC has both IPs (of itself) defined first and the DNS server is
using forwarders to the local ISP DNS servers.

Is there anything wrong with this configuration - does it make sense?

What might be causing the 7062? I checked all the standard suggestions.
I don't have any sub domains.

 

[Lanwench [MVP - Exchange]]

In

I have a W2k3 DC with DNS that has two NICs. I have a separate
firewall, so I wanted to use the dual NICs on the server for
throughput.

If these are both NICs from the same manufacturer, and they support teaming
with their own software, go to town - otherwise, don't even bother,
seriously - just disable one. You're going to have problems. Especially,
especially because this is a DC.

I assigned separate IPs .254 and .253 to the NICs. I added

 

[Guest]

Hi biz
i think you must review this link
http://support.microsoft.com/default.aspx?scid=kb;en-us;235689
and good luck
mahmoud