C
Chuck
Chuck:
I think I have a grasp of what you are saying. It is more clear after
seeing the Primary DNS of 68.238.128.12 and the Secondary DNS of 68.238.64.12
in the DSL Connection Information for the Westell modem. What I don't
understand is when I look at ipconfig /all, both the Primary and Secondary
DNS IP numbers are 192.168.1.1 and the modem is showing the true IP
address's. Why doesn't Windows recognize the true Primary and Secondary DNS
address's? Or, is Windows only looking for the modem at IP address
192.168.1.1 and it (the modem) does not have or need a Secondary IP Address
which Windows would utilize?
Regards,
Dan
Dan,
This is not a case of Windows not recognising the true addresses. For Windows,
192.168.1.1 is it. Only the router knows. To Windows, 192.168.1.1 IS the true
server. This is actually a slick setup. When your ISP changes its DNS servers,
instead of having to change the settings on each computer, you make the change
once, on the router. Or, with your router accepting automatic settings from
your ISP, you'll not even have to know when the DNS servers change.
So having learned a bit about DNS, let's see if the problem that you're having
is related to DNS. When the problem comes up, find out the IP address of the
server that you can't access. Then substitute the IP address, for the server
name, in the URL.
You just need to use another DNS server. Here's two DNS servers, by name and by
IP address, as an example. Use any of the 4 addresses, and find out the IP
address of the server that you need to reach.
All Net Tools: http://www.all-nettools.com/tools1.htm
All Net Tools: http://216.92.207.177/toolbox
DNS Stuff: http://www.dnsstuff.com/
DNS Stuff: http://69.2.200.183/
Use either server, and find out the IP address. Let us know if that makes a
difference.