Configure dialup client IP config not right

[blaqb0x]

Hi,

I have Windows 2000 server SP4 running as a dialup RAS box. I have it
set to give clients that dialup an ip from a pool of 2 ip's.

When a client logs in they get the right IP but, don't get the right
subnet mask or gateway. How can one configure the mask and gateway
for the clients.

BTW the clients get IP config like so

IP: 192.168.1.100
MASK: 255.255.255.255
GW: 192.168.1.100

They should get a /24 mask and a REAL gw.

Any help on getting a dialup box to give out NAT IP addresses and use
one public IP for out going traffic would be appreciated.

Thanks,

 

[Doug Sherman [MVP]]

This is normal - you have a PPP connection and the subnet mask will always
be 255.255.255.255. On the dial-up client connection you can configure to
use or not use the default gateway on the remote network. See:

http://support.microsoft.com/default.aspx?scid=kb;en-us;317025

Doug Sherman
MCSE Win2k/NT4.0, MCSA, MCP+I, MVP