Computer won't boot

M

mmjmm

When I try to boot from the W2k installation CD it gets to "setup is
inspecting your computer's hardware configuration..." then goes no
further. I have checked the RAM with Memtest and it is ok. What else
should I check?

Thanks
Mike
 
J

John M

If it's a new build, check the jumpers on your hard disk
(master/slave/single drive)
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Computer won't boot to windows 8
Panasonic cf-29 boot from CD 0
crashes and memtest results 0
DVD Drive does not boot W7 DVD 19
W2k on new hardware? 5
Can't boot to Windows XP install disc 9
New PC worked initially, but now won't power up 11
Can't boot XP off new SATA drive 33

Top