Computer keeps restarting without warning

[Jared]

The BrSplService service has reported an invalid current state 0

and

Error code 0000009c, parameter1 00000001, parameter2 8054da70,
parameter3 b2000000, parameter4 00000115

These are the 2 errors that I find in the event viewer. I will be
working on my computer and it will automatically restart without a
warning. Can anyone help? Please e-mail me at
(e-mail address removed)

Thanks

 

[S.Sengupta]

To prevent the system from automatically restarting:

Right click [My Computer] click [Properties] and select [Advanced] tab.
Click the [Settings] button in the [Startup and Recovery] section.
Remove the checkmark from [Automatically Restart] in [System Failure]
section.

Now reboot.Pay particular attention to these messages as they may
provide valuable clues to shutdown issues.

regards,
ssg MS-MVP
pronetworks.org

 

[Guest]

You haven't supplied any information about your computer Jared. What type,
what processor, what RAM etc.

Start with the most obvious thing and work backwards... Is the machine
completely rebooting? if so, check your CPU cooler, machines completely
rebooting for no apparent reason is a classic symptom of your CPU
overheating... Try this and get back to me...

Big Liam

 

[S.Sengupta]

Regarding BrSplService problem please go through the discussions here:-

http://extremetechsupport.org/forum/showthread.phtml?s=4b9188592ba867c5ec03f6f565287f40&t=45873

regards,
ssg MS-MVP
pronetworks.org

To prevent the system from automatically restarting:

Right click [My Computer] click [Properties] and select [Advanced] tab.
Click the [Settings] button in the [Startup and Recovery] section.
Remove the checkmark from [Automatically Restart] in [System Failure]
section.

Now reboot.Pay particular attention to these messages as they may
provide valuable clues to shutdown issues.

regards,
ssg MS-MVP
pronetworks.org

The BrSplService service has reported an invalid current state 0

and

Error code 0000009c, parameter1 00000001, parameter2 8054da70,
parameter3 b2000000, parameter4 00000115

These are the 2 errors that I find in the event viewer. I will be
working on my computer and it will automatically restart without a
warning. Can anyone help? Please e-mail me at
(e-mail address removed)

Thanks