Checkdisk wont run at startup

[Guest]

After setting up checkdisk to run at start up I get the error message 'cannot
read volume'. I do not have spyware doctor and have always run Norton anti
virus without any problems. Can someone help please.

 

[NewScience]

How are you setting up 'chkdsk' at startup. You are using 'chkdsk' correct?
Or are you using a third-party application?

 

[Wesley Vogel]

If you are getting one of these messages:

Cannot lock volume for direct access
or
Cannot open volume for direct access

Symantec AntiVirus Corporate Edition 9.0 can cause the problem.

Chkdsk.exe or ScanDisk fails to run on Windows XP or Windows 2003 after
installing Symantec AntiVirus Corporate Edition 9.0
http://service1.symantec.com/SUPPOR...6e22005026f1/52d79c84c363973488256ea600542b5a

A program called Hitman Pro can cause the problem.

A really old version of ZoneAlarm (a version from 2004) can cause the
problem.

BitDefender Internet Security 9 can cause the problem.

[[Ok BitDefender live support told me yesterday that they are working on it
and
sending people analyse tools but she didn't send me one.....]]
from...
(e-mail address removed) 21 May 2006

Spyware Doctor can also cause the problem.

The /x switch doesn't work if Spyware Doctor is installed. Spyware Doctor
needs to be uninstalled or you can do this...

Quoted from *PCTools*, *Spyware* *Doctor*...
1. Exit from Spyware Doctor (to exit from Spyware
Doctor please right click on the Spyware Doctor icon in
the notification area (next to the clock on the Windows
taskbar) and select Exit from the menu that appears)

2. Delete the file
ikhlayer.sys from %windir%\system32\drivers\
or
from c:\windows\system32\drivers\

3. Restart Spyware Doctor

Chkdsk, defrag and error-checking should now work.
-----

You can also try this.

To run chkdsk from a command prompt.

Start | Run | Type: cmd | Click OK |
In the command prompt, type:

chkdsk C: /x

Hit your Enter key.

The following error message appears:
Chkdsk cannot run because the volume is in use by another process. Would you
like to schedule this volume to be checked the next time the system
restarts? (Y/N)

Type Y, hit Enter and close the command prompt.

Reboot.

The /x switch: Use with NTFS only. Forces the volume to dismount first, if
necessary. All open handles to the drive are invalidated. /x also includes
the functionality of /f. The /F switch fixes errors on the disk.

Unable to run CHKDSK
http://support.microsoft.com/kb/555484

[[Message 1
Cannot lock volume for direct access
Message 2
Cannot open volume for direct access ]]
You receive an error message when you run the Autochk.exe utility on a
partition after you restart the computer or when you schedule the Chkdsk.exe
utility to run on a partition on a Windows 2000-based computer or a Windows
NT-based computer
http://support.microsoft.com/kb/160654

This can sometimes work.

Schedule chkdsk and reboot in Safe Mode.

The way to do that in this instance is to use the msconfig method.

Start | Run | Type: msconfig | Click OK |
BOOT.INI tab | Under Boot Options select: /SAFEBOOT

The /SAFEBOOT switch causes Windows to start in Safe Mode.

After making those boot.ini changes using msconfig, you need to click Apply
and Close.

Then click on: Restart.

See if chkdsk runs correctly.

Then before you shutdown or reboot again, open msconfig...

UNSelect: /SAFEBOOT under the boot.ini tab | Click Apply |
Under the General tab Select: Normal Startup - load all device drivers and
services | Click Apply and Close

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In

 

[lurker]

After setting up checkdisk to run at start up I get the error message 'cannot
read volume'. I do not have spyware doctor and have always run Norton anti
virus without any problems. Can someone help please.

Pull the hard drive and install it as a slave in another system and rune
required utilities on it that way.

Carl

 

[Guest]

Checkdisk decided to start working today after not doing anything to it,
thanks for the advice I will keep it in case this happens again.

If you are getting one of these messages:

Cannot lock volume for direct access
or
Cannot open volume for direct access

Symantec AntiVirus Corporate Edition 9.0 can cause the problem.

Chkdsk.exe or ScanDisk fails to run on Windows XP or Windows 2003 after
installing Symantec AntiVirus Corporate Edition 9.0
http://service1.symantec.com/SUPPOR...6e22005026f1/52d79c84c363973488256ea600542b5a

A program called Hitman Pro can cause the problem.

A really old version of ZoneAlarm (a version from 2004) can cause the
problem.

BitDefender Internet Security 9 can cause the problem.

[[Ok BitDefender live support told me yesterday that they are working on it
and
sending people analyse tools but she didn't send me one.....]]
from...
(e-mail address removed) 21 May 2006

Spyware Doctor can also cause the problem.

The /x switch doesn't work if Spyware Doctor is installed. Spyware Doctor
needs to be uninstalled or you can do this...

Quoted from *PCTools*, *Spyware* *Doctor*...
1. Exit from Spyware Doctor (to exit from Spyware
Doctor please right click on the Spyware Doctor icon in
the notification area (next to the clock on the Windows
taskbar) and select Exit from the menu that appears)

2. Delete the file
ikhlayer.sys from %windir%\system32\drivers\
or
from c:\windows\system32\drivers\

3. Restart Spyware Doctor

Chkdsk, defrag and error-checking should now work.
-----

You can also try this.

To run chkdsk from a command prompt.

Start | Run | Type: cmd | Click OK |
In the command prompt, type:

chkdsk C: /x

Hit your Enter key.

The following error message appears:
Chkdsk cannot run because the volume is in use by another process. Would you
like to schedule this volume to be checked the next time the system
restarts? (Y/N)

Type Y, hit Enter and close the command prompt.

Reboot.

The /x switch: Use with NTFS only. Forces the volume to dismount first, if
necessary. All open handles to the drive are invalidated. /x also includes
the functionality of /f. The /F switch fixes errors on the disk.

Unable to run CHKDSK
http://support.microsoft.com/kb/555484

[[Message 1
Cannot lock volume for direct access
Message 2
Cannot open volume for direct access ]]
You receive an error message when you run the Autochk.exe utility on a
partition after you restart the computer or when you schedule the Chkdsk.exe
utility to run on a partition on a Windows 2000-based computer or a Windows
NT-based computer
http://support.microsoft.com/kb/160654

This can sometimes work.

Schedule chkdsk and reboot in Safe Mode.

The way to do that in this instance is to use the msconfig method.

Start | Run | Type: msconfig | Click OK |
BOOT.INI tab | Under Boot Options select: /SAFEBOOT

The /SAFEBOOT switch causes Windows to start in Safe Mode.

After making those boot.ini changes using msconfig, you need to click Apply
and Close.

Then click on: Restart.

See if chkdsk runs correctly.

Then before you shutdown or reboot again, open msconfig...

UNSelect: /SAFEBOOT under the boot.ini tab | Click Apply |
Under the General tab Select: Normal Startup - load all device drivers and
services | Click Apply and Close

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In

After setting up checkdisk to run at start up I get the error message
'cannot read volume'. I do not have spyware doctor and have always run
Norton anti virus without any problems. Can someone help please.

 

[Wesley Vogel]

Problems that fix themselves are the best kind of problems to have. ;-)

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In

Checkdisk decided to start working today after not doing anything to it,
thanks for the advice I will keep it in case this happens again.

If you are getting one of these messages:

Cannot lock volume for direct access
or
Cannot open volume for direct access

Symantec AntiVirus Corporate Edition 9.0 can cause the problem.

Chkdsk.exe or ScanDisk fails to run on Windows XP or Windows 2003 after
installing Symantec AntiVirus Corporate Edition 9.0
http://service1.symantec.com/SUPPOR...6e22005026f1/52d79c84c363973488256ea600542b5a

A program called Hitman Pro can cause the problem.

A really old version of ZoneAlarm (a version from 2004) can cause the
problem.

BitDefender Internet Security 9 can cause the problem.

[[Ok BitDefender live support told me yesterday that they are working on
it and
sending people analyse tools but she didn't send me one.....]]
from...
(e-mail address removed) 21 May 2006

Spyware Doctor can also cause the problem.

The /x switch doesn't work if Spyware Doctor is installed. Spyware
Doctor needs to be uninstalled or you can do this...

Quoted from *PCTools*, *Spyware* *Doctor*...
1. Exit from Spyware Doctor (to exit from Spyware
Doctor please right click on the Spyware Doctor icon in
the notification area (next to the clock on the Windows
taskbar) and select Exit from the menu that appears)

2. Delete the file
ikhlayer.sys from %windir%\system32\drivers\
or
from c:\windows\system32\drivers\

3. Restart Spyware Doctor

Chkdsk, defrag and error-checking should now work.
-----

You can also try this.

To run chkdsk from a command prompt.

Start | Run | Type: cmd | Click OK |
In the command prompt, type:

chkdsk C: /x

Hit your Enter key.

The following error message appears:
Chkdsk cannot run because the volume is in use by another process. Would
you like to schedule this volume to be checked the next time the system
restarts? (Y/N)

Type Y, hit Enter and close the command prompt.

Reboot.

The /x switch: Use with NTFS only. Forces the volume to dismount first,
if necessary. All open handles to the drive are invalidated. /x also
includes the functionality of /f. The /F switch fixes errors on the
disk.

Unable to run CHKDSK
http://support.microsoft.com/kb/555484

[[Message 1
Cannot lock volume for direct access
Message 2
Cannot open volume for direct access ]]
You receive an error message when you run the Autochk.exe utility on a
partition after you restart the computer or when you schedule the
Chkdsk.exe utility to run on a partition on a Windows 2000-based
computer or a Windows NT-based computer
http://support.microsoft.com/kb/160654

This can sometimes work.

Schedule chkdsk and reboot in Safe Mode.

The way to do that in this instance is to use the msconfig method.

Start | Run | Type: msconfig | Click OK |
BOOT.INI tab | Under Boot Options select: /SAFEBOOT

The /SAFEBOOT switch causes Windows to start in Safe Mode.

After making those boot.ini changes using msconfig, you need to click
Apply and Close.

Then click on: Restart.

See if chkdsk runs correctly.

Then before you shutdown or reboot again, open msconfig...

UNSelect: /SAFEBOOT under the boot.ini tab | Click Apply |
Under the General tab Select: Normal Startup - load all device drivers
and services | Click Apply and Close

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In

After setting up checkdisk to run at start up I get the error message
'cannot read volume'. I do not have spyware doctor and have always run
Norton anti virus without any problems. Can someone help please.

 

[Ken Blake]

Problems that fix themselves are the best kind of problems to have.
;-)

That's one way of looking at it. I think it's the worst kind of problem to
have, because almost invariably they come back to haunt you. And it can be
very difficult to diagnose intermittent problems.

I used to have a car with headlights that would sometimes turn themselves
off. Whenever I brought it in to have the problem fixed, the headlights
worked fine, and nobody could fix it. One night I got a ticket for driving
with the headlights off.