CD-ROM Not Working

[Guest]

I recently reformatted and it appeared that EVERYTHING was fine. Right now,
my CD-ROM drive isn't reading any of my cds. I have updated to sp2. My pc
specs are AMD 64-bit +3200 socket 754 with a MSI K8N Neo Platinum with
updated board drivers. I have ATI catalyst 5.11 drivers. My cd-rom drive is a
Samsung SH-152A drive.

Last night, I broke my jump drive on the front port.. i literally broke the
little jump drive circuit board and one of my friends said that the jump
drive could have short circuited my board.. is that likely?

Anyways.. my cd-rom drive is detected and all, it just wont read any cds...
I've tried rolling back my drivers and everything

 

[Peter Foldes]

Have you tried another CD ROM. The reader in the drive could be defective.

 

[Guest]

Yes I have, I have a master/slave set-up on IDE 2 and it appears both don't
work. I also tried just having a master and it didn't work either.

 

[Peter Foldes]

Have you checked you lower and upper filters in your registry as per this KB below. Check those filters and see.
Post back with result.

Although the KB does not apply as per you issue exactly just check out those filters

http://support.microsoft.com/default.aspx?scid=kb;en-us;314060

 

[Guest]

The only thing i see in {4D36E965-E325-11CE-BFC1-08002BE10318} is
(default)
Class
EnumPropPAges32
Icon
Installer32
NoInstallClass
SilentInstall
ToubleShooter-0