CD-ROM conflict w/ IEEE

  • Thread starter Thread starter toddm
  • Start date Start date
T

toddm

I install an IEEE 1394 PCI card. Everything worked fine.
Installed software using CD-Rom. Hooked up a camera to
capture a video clip and now CD-Rom is not working. I put
a disc in and it can not read it. I uninstalled IEEE card
from device manager. Problem come back when using IEEE
card. Apparently there is a conflict. Please advise.
Thanks.
 
I would try installing the card, then after the cd rom is not working, I
would remove the CD ROM from the device manager and reboot.

Would also go into the bios and where it says "Plug and Play aware OS", yes
or no, I would select no, save and exit. Might at this point remove both the
CD rom from the device manager and the 1394 card. Let windows redetect both
after you change the bios.
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

IEEE 1394 Controller - Device Cannot Start Error 3
Windows XP SP2 1394 Network Adapter 1
1394 PCI Card Driver 14
Firewire IEEE 1394 device start error 3
Video Capturing problem for Sony HC 40 E on IEEE 1394 1
Firewire Card Problem 2
IEEE 1394 Controller under winXP Pro 2
VIA OHCI Compliant IEEE 1394 5

Back
Top