Use your ERD to return to the previous state. Of course System State must have been
checked whenever this was completed.
If you do not have a current ERD, try rebooting to Safe Mode (F8), and choose Last
Known Good Configuration.
If this does not work, you will need to complete an Upgrade Installation...
=============
Windows 2000 In-Place Upgrade
*Check your CD-ROM for bootability
(The very beginning of booting up is called POSTING)
Note: During posting, Ctrl+Alt(hold)& Delete(tap) can be used to start over.
1. Enter BIOS tap the Delete key at POSTING several times.
2. Usually Advanced CMOS (Complementary Metal Oxide Semiconductor)
3. Find and change first Boot Device from Floppy to CD-ROM
4. F10 <enter> to Save(usually)
5. Place Installation CD-ROM in tray and restart (Ctrl.+Alt.& Delete)
Note: If by chance the CD-ROM is NOT Bootable, it will boot normally, and not load
the bootup sequence. If not, use the four bootup floppies that came with system. If
you do not have any, regular format 4 floppies with NT computer, and notice that the
bad sectors are zero. The files at
www.bootdisk.com. Mark your floppies 1/4, etc. so
the order doesn't get mixed up.
Begin:
1. Boot with CD-ROM or Boot Floppies.
2. Choose "Set up Windows 2000 now" (not repair)
3. (When prompted) Insert Installation CD
4. Press Enter
5. Press F8 to agree with EULA(end user license agreement)
6. Press "R" for REPAIR.
7. Press Enter (Remove last floppy) to copy files from CD
8. Press Enter at prompt (this will take a few minutes)
9. Prompt for language (press Enter)
10.Enter CD Key number at prompt.
11.Setup, installs components (takes a few minutes)
12.Press Enter at "Finish" Prompt to reboot
Note: This will reset passwords and reset user passwords to "blank". You should set
the Administrator password, and one more administrator account for an alternate in
case the primary account fails. These should be strong passwords (10 or more
alphanumeric characters). This also rolls back your Service Packs and Hot Patches in
OS, and in Internet Explorer. Look in your Add/Remove Programs in Control Panel).
===========
How to Perform an In-Place Upgrade of Windows 2000
http://support.microsoft.com/default.aspx?kbid=292175
What an In-Place Windows 2000 Upgrade Changes and What It Does Not Change
http://support.microsoft.com/default.aspx?kbid=306952
===========
don
After using registry cleaner (trial) my system is really screwed up.
explorer [not ie] will not open (initiate) any .exe file for installation.
The error sez "xxxx.exe has generated error and will be closed by windows.
Need to restart program.
Or it attempts to start and a series of 10 or 12 beeps and stalls.
Or I try to download a file for installation (and use the open file) method
and the same thing happens.
Win 2000pro, Pentium 4,160 gig hd.
