Can't capture the video!

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have a laptop so it has the usb port and I know that the computer reads the
camcorder because it doesn't find any images on the card (and there aren't
any) but when I use the movie maker and try to capture the video it says the
camera isn't connected right. What do I do??? I'm using the usb and camcorder
wire and it's on the card switch... so what's wrong??
 
it says "device to capture video was not detected. verify device is turned on
and connected properly and try again"
 
Do you have the USB driver for the camera installed? Firewire/IEE1394
connection is preferred over USB.
 
Do you have the USB driver for the camera installed? Firewire/IEE1394
connection is preferred over USB.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

capturing a clip 0
video capture problems 9
Analog Video / Audio 1
Movie Maker won't capture 4
CAPTURE DEVICE NOT DETECTED 7
Canon Digital Camcorder HV10 HDV 2
Video device not capturing 16
Blue screen of death when importing video 7

Back
Top