Cannot enable gateway

[Tony]

Hi all. I have a D-Link 604 router to which I connect 2
xp pro sp1 machines. I have Upnp and ssdp services
running on both machines. On the kids machine the
gateways is enabled and they can surf the net. On my
machine the gateway shows as disabled and I cannot enable
it although I can still surf the net. I believe this is
causing me port forwarding problems as some application
cannot reach the internet. I have uninstalled and re-
installed tcp/ip, upnp and gateway detection something or
other (windows networking component) and still no joy.
NO software firewalls are running although Zone Alarm is
installed. Any ideas?
Thanks in advance.

 

[Ken Wickes [MSFT]]

It's probably ZoneAlarm, you might try uninstalling it till you get things
working.

 

[Tony]

Uninstalled ZA and still no different. When I try to
enable it (router) XP says connecting... then nothing and
no status change. Went and got a linksys to replace my
Dlink ...no difference. Can still surf and email etc. Did
the netsh thing to 'refresh' my tcp stack. Out of ideas.
Anyone else?

-----Original Message-----
It's probably ZoneAlarm, you might try uninstalling it till you get things
working.

--

Ken Wickes [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Hi all. I have a D-Link 604 router to which I connect 2
xp pro sp1 machines. I have Upnp and ssdp services
running on both machines. On the kids machine the
gateways is enabled and they can surf the net. On my
machine the gateway shows as disabled and I cannot enable
it although I can still surf the net. I believe this is
causing me port forwarding problems as some application
cannot reach the internet. I have uninstalled and re-
installed tcp/ip, upnp and gateway detection something or
other (windows networking component) and still no joy.
NO software firewalls are running although Zone Alarm is
installed. Any ideas?
Thanks in advance.

.

 

[Ken Wickes [MSFT]]

Does your linksys have the lastest firmware? Some versions of the Linksys
firmware had this problem.

--

Ken Wickes [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Uninstalled ZA and still no different. When I try to
enable it (router) XP says connecting... then nothing and
no status change. Went and got a linksys to replace my
Dlink ...no difference. Can still surf and email etc. Did
the netsh thing to 'refresh' my tcp stack. Out of ideas.
Anyone else?

-----Original Message-----
It's probably ZoneAlarm, you might try uninstalling it till you get things
working.

--

Ken Wickes [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Hi all. I have a D-Link 604 router to which I connect 2
xp pro sp1 machines. I have Upnp and ssdp services
running on both machines. On the kids machine the
gateways is enabled and they can surf the net. On my
machine the gateway shows as disabled and I cannot enable
it although I can still surf the net. I believe this is
causing me port forwarding problems as some application
cannot reach the internet. I have uninstalled and re-
installed tcp/ip, upnp and gateway detection something or
other (windows networking component) and still no joy.
NO software firewalls are running although Zone Alarm is
installed. Any ideas?
Thanks in advance.

.

 

[Guest]

Yes it is the latest firmware. Out of ideas

-----Original Message-----
Does your linksys have the lastest firmware? Some versions of the Linksys
firmware had this problem.

--

Ken Wickes [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Uninstalled ZA and still no different. When I try to
enable it (router) XP says connecting... then nothing and
no status change. Went and got a linksys to replace my
Dlink ...no difference. Can still surf and email etc. Did
the netsh thing to 'refresh' my tcp stack. Out of ideas.
Anyone else? and
confers no rights. something
or Alarm
is

.

 

[Ken Wickes [MSFT]]

Occasionally a realtime virus scanner can cause problems. Other than that
I'm out of ideas.

--

Ken Wickes [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Yes it is the latest firmware. Out of ideas

-----Original Message-----
Does your linksys have the lastest firmware? Some versions of the Linksys
firmware had this problem.

--

Ken Wickes [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Uninstalled ZA and still no different. When I try to
enable it (router) XP says connecting... then nothing and
no status change. Went and got a linksys to replace my
Dlink ...no difference. Can still surf and email etc. Did
the netsh thing to 'refresh' my tcp stack. Out of ideas.
Anyone else?
-----Original Message-----
It's probably ZoneAlarm, you might try uninstalling it
till you get things
working.

--

Ken Wickes [MSFT]
This posting is provided "AS IS" with no warranties, and
confers no rights.


message
Hi all. I have a D-Link 604 router to which I connect 2
xp pro sp1 machines. I have Upnp and ssdp services
running on both machines. On the kids machine the
gateways is enabled and they can surf the net. On my
machine the gateway shows as disabled and I cannot
enable
it although I can still surf the net. I believe this is
causing me port forwarding problems as some application
cannot reach the internet. I have uninstalled and re-
installed tcp/ip, upnp and gateway detection something
or
other (windows networking component) and still no joy.
NO software firewalls are running although Zone Alarm
is
installed. Any ideas?
Thanks in advance.


.

.