Sorry for this:
DISKPART> assign letter F
I meant to say "g" according to the example or assign whichever letter
follows in your installation... or assign a letter that no other drive will
ever use, to prevent system confusion that can result in hidding the USB
drive in My Computer and Explorer. I usually go far ahead in the alphabet
and use letter "O" or another following that. And it's important that you
stick to the same USB port to prevent new hardware detection every time you
connect to a different USB port.
-----------------------
"Ronaldo" <
[email protected]> escribió en el mensaje
Start\Run\type: "DISKPART" (no quotes) and Enter, next type: "list volume"
and Enter, a numbered list of drives appears, next according to the number
that corresponds to the USB Drive (see example), type "select volume #"
and
Enter, and next type: "assign letter g" (or whichever letter that
corresponds to the drive) and enter. The USB Drive should appear in My
Computer and in Windows Explorer.
Example of a PC with 2 HD partitions:
A:\ is volume 1 = floppy drive
C:\ is volume 2 = system HD partition
D:\ is volume 3 = second HD partition (add a drive letter & number per
additional partition)
E:\ is volume 4 = first optical drive
F:\ is volume 5 = second optical drive
G:\ is volume 6 = USB Drive
Narrowed down to four simple steps:
DISKPART>
DISKPART> list volume
DISKPART> select volume #
DISKPART> assign letter F
To undo the letter assignation repeat all except for the last command
which
should be: "remove letter F" or whichever letter you have assigned.
You could assign a permanent letter also in the Disk Manager with a right
click on the USB drive, and "assign letter and access path to drive" but
you
have to recover permissions to the C:\ drive and scan your computer for
possible spyware, trojan or virus infection because it's typical of
hackware
to take control of infected systems and leave the owner with limited
security permissions.
Install Adaware SE Personal, Spybot Search & Destroy, CWShredder,
and The Cleaner.
http://www.majorgeeks.com/downloads31.html
http://www.moosoft.com
-------------------------------------------------
"nerdocalypse" <
[email protected]> escribió en el
mensaje just a bit to add, specifically the message says "you do not have access
rights to logical disk manager on AHT [my computer name]" "unable to
connect
to logical disk manager service". i have looked in Services and made
sure
the
two logical disk manager services are running.
again, i dont really need to access logical disk manager if there's some
other way to open my usb drives. thanks.
:
i cannot access my mp3 player in explorer. the only way i have ever
been
able
to is through the logical disk manager in the computer management
section of
the administrator services, but now i click on that and i get a
message
saying [my computer name] cannot access it! somehow, i lost the
permission to
log in to my own disk drives??
please either help me find another way to access my usb drives (no,
they
dont just show up in 'my computer' like they probably should) or help
me
to
get access thru the logical disk manager again.