Cannot Access Internet from Client PC

[Guest]

Hello Friends

I have 2 PCs and I'm trying to access Internet from both.. The HOST PCs
Configuation is given below.. I'm connection to Internet using a Dialup DSL
Modem (USB) and I have a NIC in the Host..

The Problem is that I can successfully access Files and Printers on both
the PC but I cann't access Intenet from the Client PC. The HOST is
successfuly connecting to the Intenet.

The HOST is having a static IP (192.168.0.1) and the CLIENT gets its IP
automatically. I have ran Network Setup Wizard successfully on both the PCs.

I try to check Intenet Connectivity on the CLIENT by opening a Website
and/or pinging a public IP but both fail. File and Print sharing works
normally.

System Configuration (HOST)
PIV 1.6 Ghz, 1GB RAM, 250 GB HDD
WINDOWS XP PROFESSIONAL
1 DSL Modem (Connected via USB)
1 NIC
1 Bluetooth PAN
1 1394 (Firewire Connection)


System Configuration (CLIENT)
PIII 733 Mhz, 512GB RAM, 80 GB HDD
WINDOWS XP PROFESSIONAL
1 NIC


Thank you

 

[Guest]

I Forgot to mention...

both PCS have SP2 installed.. and I'm using a HUB

 

[Guest]

I Forgot to mention...

both PCS have SP2 installed.. and I'm using a HUB

You really need to create an Internet Connections Sharing (ISC) to be able
to share the Internet with the Host.
To do that read this Article:
http://support.microsoft.com/kb/234815
HTH.
Regards,
nass

 

[Guest]

I have configure ICS on the PCs.. through Network Setup Wizard.. THe HOST
has fixed IP (private) and the CLIENT gets the IP from The HOST...

This was done from the very beginning and I can't access Internet from the
Client.

Thank You

 

[Guest]

Then check your Firewall not blocking the connection and allow the ICS on it
to be able to access the internet on the Client from the Host.
HTH.
Regards,
nass
========
www.nasstec.co.uk

 

[Guest]

I'm tried connecting to the Internet on the CLIENT after disabling Firewall