Camera and Scanner Wizard

M

mk

I've tried all the fixes to get the Camera and scanner Wizard worjing again
to no avail. When I run the AutoFix I get a message that says: The AutoPlay
setting cannot be fixed. either the device is malfunctioning, or the wizard
casnnot determine the problem. The device (Zio Card Reader) is fine. I even
tried another card reader. I am enclosing the AutoFix file log. Anyone have
any ideas as to how I can fix this problem?

AutoFix [V5.2.3790.67]
Time [2003-12-22 09:12:23]
Microsoft Windows Version [5.1 (Service Pack 1) <2600>]

Test [The Shell Hardware Detection service is running.] - Instance [N/A]:
Result [AutoStart Setting]: OK
Result [The Shell Hardware Detection service is running.]: OK

Test [Policies] - Instance [I:\, Drive Type: 2]:
Result [HKCU\...\Policies!NoDrives]: OK {Absent}
Result [HKCU\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKCU\...\Policies!NoDriveTypeAutorun]: OK {Present}
Result [HKLM\...\Policies!NoDrives]: OK {Absent}
Result [HKLM\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKLM\...\Policies!NoDriveTypeAutorun]: OK {Present}
Result [Driver level policies]: OK {
HKLM\...\Services\!Autorun (Absent) <Allows>
HKLM\...\Services\\Parameters!Autorun (Absent) <Allows>
HKLM\System\CCS\Enum\...!AlwaysEnable (Absent) <Not set>
HKLM\System\CCS\Enum\...!AlwaysDisable (Absent) <Not set> }

Test [Drive Notification] - Instance [I:\, Drive Type: 2]:
Result [Legacy Notification]: OK
Result [AutoPlay V2 Notification]: Problems {
Service (Silent)
Shell (Deaf) }
Repair << [Autoplay V2 Event]
Click to expand...
Click to expand...
Step: No steps to take.
Result: This AutoPlay setting cannot be fixed. Either the device is
malfunctioning, or the wizard cannot determine the problem.
 
Y

Yves Alarie

The fix you tried works, but not for everybody. Why it does not work for
everybody is impossible for me to say. I just don't know why. Maybe
somebody will come to the rescue.
It looks like if you want this wizard to work you may have to buy a USB card
reader (about $20.00) and use the card reader to transfer your picture from
your memory card to your hard drive.
mk said:
I've tried all the fixes to get the Camera and scanner Wizard worjing again
to no avail. When I run the AutoFix I get a message that says: The AutoPlay
setting cannot be fixed. either the device is malfunctioning, or the wizard
casnnot determine the problem. The device (Zio Card Reader) is fine. I even
tried another card reader. I am enclosing the AutoFix file log. Anyone have
any ideas as to how I can fix this problem?

AutoFix [V5.2.3790.67]
Time [2003-12-22 09:12:23]
Microsoft Windows Version [5.1 (Service Pack 1) <2600>]

Test [The Shell Hardware Detection service is running.] - Instance [N/A]:
Result [AutoStart Setting]: OK
Result [The Shell Hardware Detection service is running.]: OK

Test [Policies] - Instance [I:\, Drive Type: 2]:
Result [HKCU\...\Policies!NoDrives]: OK {Absent}
Result [HKCU\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKCU\...\Policies!NoDriveTypeAutorun]: OK {Present}
Result [HKLM\...\Policies!NoDrives]: OK {Absent}
Result [HKLM\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKLM\...\Policies!NoDriveTypeAutorun]: OK {Present}
Result [Driver level policies]: OK {
HKLM\...\Services\!Autorun (Absent) <Allows>
HKLM\...\Services\\Parameters!Autorun (Absent) <Allows>
HKLM\System\CCS\Enum\...!AlwaysEnable (Absent) <Not set>
HKLM\System\CCS\Enum\...!AlwaysDisable (Absent) <Not set> }

Test [Drive Notification] - Instance [I:\, Drive Type: 2]:
Result [Legacy Notification]: OK
Result [AutoPlay V2 Notification]: Problems {
Service (Silent)
Shell (Deaf) }
Repair << [Autoplay V2 Event]
Click to expand...
Click to expand...
Step: No steps to take.
Result: This AutoPlay setting cannot be fixed. Either the device is
malfunctioning, or the wizard cannot determine the problem.
Click to expand...
 
M

mk

Thanks for your reply. I'll just transfer my pictures without using the
"Wizard", the way I did before XP. I just wish I could get to the bottom
line as to why it works for some and why not for others. The fix worked for
me on my girlfriend's computer.
mk

The fix you tried works, but not for everybody. Why it does not work for
everybody is impossible for me to say. I just don't know why. Maybe
somebody will come to the rescue.
It looks like if you want this wizard to work you may have to buy a USB card
reader (about $20.00) and use the card reader to transfer your picture from
your memory card to your hard drive.
mk said:
I've tried all the fixes to get the Camera and scanner Wizard worjing again
to no avail. When I run the AutoFix I get a message that says: The AutoPlay
setting cannot be fixed. either the device is malfunctioning, or the wizard
casnnot determine the problem. The device (Zio Card Reader) is fine. I even
tried another card reader. I am enclosing the AutoFix file log. Anyone have
any ideas as to how I can fix this problem?

AutoFix [V5.2.3790.67]
Time [2003-12-22 09:12:23]
Microsoft Windows Version [5.1 (Service Pack 1) <2600>]

Test [The Shell Hardware Detection service is running.] - Instance [N/A]:
Result [AutoStart Setting]: OK
Result [The Shell Hardware Detection service is running.]: OK

Test [Policies] - Instance [I:\, Drive Type: 2]:
Result [HKCU\...\Policies!NoDrives]: OK {Absent}
Result [HKCU\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKCU\...\Policies!NoDriveTypeAutorun]: OK {Present}
Result [HKLM\...\Policies!NoDrives]: OK {Absent}
Result [HKLM\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKLM\...\Policies!NoDriveTypeAutorun]: OK {Present}
Result [Driver level policies]: OK {
HKLM\...\Services\!Autorun (Absent) <Allows>
HKLM\...\Services\\Parameters!Autorun (Absent) <Allows>
HKLM\System\CCS\Enum\...!AlwaysEnable (Absent) <Not set>
HKLM\System\CCS\Enum\...!AlwaysDisable (Absent) <Not set> }

Test [Drive Notification] - Instance [I:\, Drive Type: 2]:
Result [Legacy Notification]: OK
Result [AutoPlay V2 Notification]: Problems {
Service (Silent)
Shell (Deaf) }
Repair << [Autoplay V2 Event]
Click to expand...
Click to expand...
Step: No steps to take.
Result: This AutoPlay setting cannot be fixed. Either the device is
malfunctioning, or the wizard cannot determine the problem.
Click to expand...
 
K

Karen

I still can "autoplay" on my card reader, but have lost autoplay on my cd
and dvd drives. When I ran autofix, I got that same message that "it found
problems but could not fix them." If anyone figures out what the problem
is, please let the rest of us know. Thanks.
Karen

mk said:
Thanks for your reply. I'll just transfer my pictures without using the
"Wizard", the way I did before XP. I just wish I could get to the bottom
line as to why it works for some and why not for others. The fix worked for
me on my girlfriend's computer.
mk

The fix you tried works, but not for everybody. Why it does not work for
everybody is impossible for me to say. I just don't know why. Maybe
somebody will come to the rescue.
It looks like if you want this wizard to work you may have to buy a USB card
reader (about $20.00) and use the card reader to transfer your picture from
your memory card to your hard drive.
mk said:
I've tried all the fixes to get the Camera and scanner Wizard worjing again
to no avail. When I run the AutoFix I get a message that says: The AutoPlay
setting cannot be fixed. either the device is malfunctioning, or the wizard
casnnot determine the problem. The device (Zio Card Reader) is fine. I even
tried another card reader. I am enclosing the AutoFix file log. Anyone have
any ideas as to how I can fix this problem?

AutoFix [V5.2.3790.67]
Time [2003-12-22 09:12:23]
Microsoft Windows Version [5.1 (Service Pack 1) <2600>]

Test [The Shell Hardware Detection service is running.] - Instance [N/A]:
Result [AutoStart Setting]: OK
Result [The Shell Hardware Detection service is running.]: OK

Test [Policies] - Instance [I:\, Drive Type: 2]:
Result [HKCU\...\Policies!NoDrives]: OK {Absent}
Result [HKCU\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKCU\...\Policies!NoDriveTypeAutorun]: OK {Present}
Result [HKLM\...\Policies!NoDrives]: OK {Absent}
Result [HKLM\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKLM\...\Policies!NoDriveTypeAutorun]: OK {Present}
Result [Driver level policies]: OK {
HKLM\...\Services\!Autorun (Absent) <Allows>
HKLM\...\Services\\Parameters!Autorun (Absent) <Allows>
HKLM\System\CCS\Enum\...!AlwaysEnable (Absent) <Not set>
HKLM\System\CCS\Enum\...!AlwaysDisable (Absent) <Not set> }

Test [Drive Notification] - Instance [I:\, Drive Type: 2]:
Result [Legacy Notification]: OK
Result [AutoPlay V2 Notification]: Problems {
Service (Silent)
Shell (Deaf) }
Repair << [Autoplay V2 Event]
Click to expand...
Step: No steps to take.
Result: This AutoPlay setting cannot be fixed. Either the device is
malfunctioning, or the wizard cannot determine the problem.
Required action: The wizard found problems but cannot fix them ->
Click to expand...
None
Click to expand...
Click to expand...
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

MS Autoplay Repair Wizard could not fix. Log file attached. 6
Autoplay - Out of ideas. 4
CD/DVR roms not auto playing or popping choices. 5
Autorun 1
autofix.exe won't solve autoplay problems...please help 1
Problem with USB Drive 11
autoplay helps 4
Windows stopped recognizing DVDs 1

Top