Autoplay - Out of ideas.

I

Ian

Autoplay is not working for CDs / Cameras and other external devices.

All devices will initiate autoplay actions if you right click on device in
explorer and select autoplay but windows will not initiate this action
automatically when cd inserted or camera connected.

Have tried the following:
All settings / ideas identified in following article have been checked and
are correct
http://support.microsoft.com/kb/330135/en-us

Have downloaded and run the autoplay repair wizard and tested on DVD drive
and camera. Both reported similar problem with no apparent fix. Extract
from logs:

AutoFix [V5.2.3790.67]
Time [2008-12-23 17:46:00]
Microsoft Windows Version [5.1 (Service Pack 3) <2600>]

Test [The Shell Hardware Detection service is running.] - Instance [N/A]:
Result [AutoStart Setting]: OK
Result [The Shell Hardware Detection service is running.]: OK

Test [Policies] - Instance [D:\, Drive Type: 5]:
Result [HKCU\...\Policies!NoDrives]: OK {Absent}
Result [HKCU\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKCU\...\Policies!NoDriveTypeAutorun]: OK {Present}
Result [HKLM\...\Policies!NoDrives]: OK {Absent}
Result [HKLM\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKLM\...\Policies!NoDriveTypeAutorun]: OK {Absent}
Result [Driver level policies]: OK {
HKLM\...\Services\cdrom!Autorun (Present) <Allows>
HKLM\...\Services\cdrom\Parameters!Autorun (Absent) <Allows>
HKLM\System\CCS\Enum\...!AlwaysEnable (Absent) <Not set>
HKLM\System\CCS\Enum\...!AlwaysDisable (Absent) <Not set> }

Test [Drive Notification] - Instance [D:\, Drive Type: 5]:
Result [Legacy Notification]: OK
Result [AutoPlay V2 Notification]: Problems {
Service (Silent)
Shell (Deaf) }
Repair << [Autoplay V2 Event]
Click to expand...
Click to expand...
Step: No steps to take.
Result: This AutoPlay setting cannot be fixed. Either the device is
malfunctioning, or the wizard cannot determine the problem.

Running out of ideas so any assistance appreciated.

Regards

Ian
 
K

Kelly

Hi,

Check for the b5 hex under Hkey_Users.
NoDriveTypeAutoRun
--

All the Best and Happy Holidays,
Kelly (MS-MVP/DTS&XP)

Taskbar Repair Tool Plus!
http://www.kellys-korner-xp.com/taskbarplus!.htm


Ian said:
Autoplay is not working for CDs / Cameras and other external devices.

All devices will initiate autoplay actions if you right click on device in
explorer and select autoplay but windows will not initiate this action
automatically when cd inserted or camera connected.

Have tried the following:
All settings / ideas identified in following article have been checked and
are correct
http://support.microsoft.com/kb/330135/en-us

Have downloaded and run the autoplay repair wizard and tested on DVD drive
and camera. Both reported similar problem with no apparent fix. Extract
from logs:

AutoFix [V5.2.3790.67]
Time [2008-12-23 17:46:00]
Microsoft Windows Version [5.1 (Service Pack 3) <2600>]

Test [The Shell Hardware Detection service is running.] - Instance [N/A]:
Result [AutoStart Setting]: OK
Result [The Shell Hardware Detection service is running.]: OK

Test [Policies] - Instance [D:\, Drive Type: 5]:
Result [HKCU\...\Policies!NoDrives]: OK {Absent}
Result [HKCU\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKCU\...\Policies!NoDriveTypeAutorun]: OK {Present}
Result [HKLM\...\Policies!NoDrives]: OK {Absent}
Result [HKLM\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKLM\...\Policies!NoDriveTypeAutorun]: OK {Absent}
Result [Driver level policies]: OK {
HKLM\...\Services\cdrom!Autorun (Present) <Allows>
HKLM\...\Services\cdrom\Parameters!Autorun (Absent) <Allows>
HKLM\System\CCS\Enum\...!AlwaysEnable (Absent) <Not set>
HKLM\System\CCS\Enum\...!AlwaysDisable (Absent) <Not set> }

Test [Drive Notification] - Instance [D:\, Drive Type: 5]:
Result [Legacy Notification]: OK
Result [AutoPlay V2 Notification]: Problems {
Service (Silent)
Shell (Deaf) }
Repair << [Autoplay V2 Event]
Click to expand...
Click to expand...
Step: No steps to take.
Result: This AutoPlay setting cannot be fixed. Either the device is
malfunctioning, or the wizard cannot determine the problem.

Running out of ideas so any assistance appreciated.

Regards

Ian
Click to expand...
 
I

Ian

Hi,

All values for NoDriveTypeAutoRun in HKEY_USERS are 91 (Hex) as expected.

Any other ideas?

Thanks


Kelly said:
Hi,

Check for the b5 hex under Hkey_Users.
NoDriveTypeAutoRun
--

All the Best and Happy Holidays,
Kelly (MS-MVP/DTS&XP)

Taskbar Repair Tool Plus!
http://www.kellys-korner-xp.com/taskbarplus!.htm


Ian said:
Autoplay is not working for CDs / Cameras and other external devices.

All devices will initiate autoplay actions if you right click on device in
explorer and select autoplay but windows will not initiate this action
automatically when cd inserted or camera connected.

Have tried the following:
All settings / ideas identified in following article have been checked and
are correct
http://support.microsoft.com/kb/330135/en-us

Have downloaded and run the autoplay repair wizard and tested on DVD drive
and camera. Both reported similar problem with no apparent fix. Extract
from logs:

AutoFix [V5.2.3790.67]
Time [2008-12-23 17:46:00]
Microsoft Windows Version [5.1 (Service Pack 3) <2600>]

Test [The Shell Hardware Detection service is running.] - Instance [N/A]:
Result [AutoStart Setting]: OK
Result [The Shell Hardware Detection service is running.]: OK

Test [Policies] - Instance [D:\, Drive Type: 5]:
Result [HKCU\...\Policies!NoDrives]: OK {Absent}
Result [HKCU\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKCU\...\Policies!NoDriveTypeAutorun]: OK {Present}
Result [HKLM\...\Policies!NoDrives]: OK {Absent}
Result [HKLM\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKLM\...\Policies!NoDriveTypeAutorun]: OK {Absent}
Result [Driver level policies]: OK {
HKLM\...\Services\cdrom!Autorun (Present) <Allows>
HKLM\...\Services\cdrom\Parameters!Autorun (Absent) <Allows>
HKLM\System\CCS\Enum\...!AlwaysEnable (Absent) <Not set>
HKLM\System\CCS\Enum\...!AlwaysDisable (Absent) <Not set> }

Test [Drive Notification] - Instance [D:\, Drive Type: 5]:
Result [Legacy Notification]: OK
Result [AutoPlay V2 Notification]: Problems {
Service (Silent)
Shell (Deaf) }
Repair << [Autoplay V2 Event]
Click to expand...
Step: No steps to take.
Result: This AutoPlay setting cannot be fixed. Either the device is
malfunctioning, or the wizard cannot determine the problem.
Required action: The wizard found problems but cannot fix them -> None
Click to expand...

Running out of ideas so any assistance appreciated.

Regards

Ian
Click to expand...
Click to expand...
 
I

Ian

Hi all,

All values within HKEY_USERS for NoDriveTypeAutoRun are 91(Hex) as expected.
Any other ideas?

Thanks

Ian

Kelly said:
Hi,

Check for the b5 hex under Hkey_Users.
NoDriveTypeAutoRun
--

All the Best and Happy Holidays,
Kelly (MS-MVP/DTS&XP)

Taskbar Repair Tool Plus!
http://www.kellys-korner-xp.com/taskbarplus!.htm


Ian said:
Autoplay is not working for CDs / Cameras and other external devices.

All devices will initiate autoplay actions if you right click on device in
explorer and select autoplay but windows will not initiate this action
automatically when cd inserted or camera connected.

Have tried the following:
All settings / ideas identified in following article have been checked and
are correct
http://support.microsoft.com/kb/330135/en-us

Have downloaded and run the autoplay repair wizard and tested on DVD drive
and camera. Both reported similar problem with no apparent fix. Extract
from logs:

AutoFix [V5.2.3790.67]
Time [2008-12-23 17:46:00]
Microsoft Windows Version [5.1 (Service Pack 3) <2600>]

Test [The Shell Hardware Detection service is running.] - Instance [N/A]:
Result [AutoStart Setting]: OK
Result [The Shell Hardware Detection service is running.]: OK

Test [Policies] - Instance [D:\, Drive Type: 5]:
Result [HKCU\...\Policies!NoDrives]: OK {Absent}
Result [HKCU\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKCU\...\Policies!NoDriveTypeAutorun]: OK {Present}
Result [HKLM\...\Policies!NoDrives]: OK {Absent}
Result [HKLM\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKLM\...\Policies!NoDriveTypeAutorun]: OK {Absent}
Result [Driver level policies]: OK {
HKLM\...\Services\cdrom!Autorun (Present) <Allows>
HKLM\...\Services\cdrom\Parameters!Autorun (Absent) <Allows>
HKLM\System\CCS\Enum\...!AlwaysEnable (Absent) <Not set>
HKLM\System\CCS\Enum\...!AlwaysDisable (Absent) <Not set> }

Test [Drive Notification] - Instance [D:\, Drive Type: 5]:
Result [Legacy Notification]: OK
Result [AutoPlay V2 Notification]: Problems {
Service (Silent)
Shell (Deaf) }
Repair << [Autoplay V2 Event]
Click to expand...
Step: No steps to take.
Result: This AutoPlay setting cannot be fixed. Either the device is
malfunctioning, or the wizard cannot determine the problem.
Required action: The wizard found problems but cannot fix them -> None
Click to expand...

Running out of ideas so any assistance appreciated.

Regards

Ian
Click to expand...
Click to expand...
 
J

ju.c

I had that problem for years. I had tried everything.

After installing SP3 autoplay works perfectly.

You could install it again if it's already installed.


ju.c


Ian said:
Hi all,

All values within HKEY_USERS for NoDriveTypeAutoRun are 91(Hex) as expected.
Any other ideas?

Thanks

Ian

Kelly said:
Hi,

Check for the b5 hex under Hkey_Users.
NoDriveTypeAutoRun
--

All the Best and Happy Holidays,
Kelly (MS-MVP/DTS&XP)

Taskbar Repair Tool Plus!
http://www.kellys-korner-xp.com/taskbarplus!.htm


Ian said:
Autoplay is not working for CDs / Cameras and other external devices.

All devices will initiate autoplay actions if you right click on device in
explorer and select autoplay but windows will not initiate this action
automatically when cd inserted or camera connected.

Have tried the following:
All settings / ideas identified in following article have been checked and
are correct
http://support.microsoft.com/kb/330135/en-us

Have downloaded and run the autoplay repair wizard and tested on DVD drive
and camera. Both reported similar problem with no apparent fix. Extract
from logs:

AutoFix [V5.2.3790.67]
Time [2008-12-23 17:46:00]
Microsoft Windows Version [5.1 (Service Pack 3) <2600>]

Test [The Shell Hardware Detection service is running.] - Instance [N/A]:
Result [AutoStart Setting]: OK
Result [The Shell Hardware Detection service is running.]: OK

Test [Policies] - Instance [D:\, Drive Type: 5]:
Result [HKCU\...\Policies!NoDrives]: OK {Absent}
Result [HKCU\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKCU\...\Policies!NoDriveTypeAutorun]: OK {Present}
Result [HKLM\...\Policies!NoDrives]: OK {Absent}
Result [HKLM\...\Policies!NoDriveAutorun]: OK {Absent}
Result [HKLM\...\Policies!NoDriveTypeAutorun]: OK {Absent}
Result [Driver level policies]: OK {
HKLM\...\Services\cdrom!Autorun (Present) <Allows>
HKLM\...\Services\cdrom\Parameters!Autorun (Absent) <Allows>
HKLM\System\CCS\Enum\...!AlwaysEnable (Absent) <Not set>
HKLM\System\CCS\Enum\...!AlwaysDisable (Absent) <Not set> }

Test [Drive Notification] - Instance [D:\, Drive Type: 5]:
Result [Legacy Notification]: OK
Result [AutoPlay V2 Notification]: Problems {
Service (Silent)
Shell (Deaf) }
Repair << [Autoplay V2 Event]
Step: No steps to take.
Result: This AutoPlay setting cannot be fixed. Either the device is
malfunctioning, or the wizard cannot determine the problem.

Required action: The wizard found problems but cannot fix them -> None

Running out of ideas so any assistance appreciated.

Regards

Ian
Click to expand...
Click to expand...
Click to expand...
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

CD/DVR roms not auto playing or popping choices. 5
autofix.exe won't solve autoplay problems...please help 1
autoplay helps 4
Autorun 1
AutoFix AutoPlay 1
MS Autoplay Repair Wizard could not fix. Log file attached. 6
Auto Run Problem 3
Strange USB Problem 3

Top