H
Homer Simpson
Dell PowerEdge 1300/550 (Dual P3-550's)
512MB RAM
2MB Video
Adaptec 78xx SCSI On Board
Adaptec 2940 SCSI PCI
Promise Ultra100TX2 IDE PCI
I have been trying to install Windows XP Professional, slipstreamed
with SP1a. This is a clean install on a freshly formatted harddrive.
XP will load the setup drivers, and load the necessary files. Once it
gets to "Starting Windows XP" in the setup process, I get a BSoD and a
STOP error with the following codes:
0x0000007E
0xC0000005
0x80541676
0xF7AF70EC
0xF7AF6DEC
I have pulled all the cards from the system, and disabled the onboard
SCSI. I have also removed one of the processors and put the terminator
card in place. I am running the newest BIOS revision for the system
(A12 I believe).
I am wanting to use this system as a simple file and print server.
W2K3 server seems overkill for this. I also have Windows 2000
Professional, but was hoping to get XP to run.
Any help?
512MB RAM
2MB Video
Adaptec 78xx SCSI On Board
Adaptec 2940 SCSI PCI
Promise Ultra100TX2 IDE PCI
I have been trying to install Windows XP Professional, slipstreamed
with SP1a. This is a clean install on a freshly formatted harddrive.
XP will load the setup drivers, and load the necessary files. Once it
gets to "Starting Windows XP" in the setup process, I get a BSoD and a
STOP error with the following codes:
0x0000007E
0xC0000005
0x80541676
0xF7AF70EC
0xF7AF6DEC
I have pulled all the cards from the system, and disabled the onboard
SCSI. I have also removed one of the processors and put the terminator
card in place. I am running the newest BIOS revision for the system
(A12 I believe).
I am wanting to use this system as a simple file and print server.
W2K3 server seems overkill for this. I also have Windows 2000
Professional, but was hoping to get XP to run.
Any help?