N
nach
HI one day my pc broke down, and after that i could boot it just goes to
windows the menu from windows with Failsafe
normal etc... and whatever i choose it just goes to dos screen with a
blinking cursor, and CTRl - ALT - Del doesnt
work anymore, and i have to hold the power button for 4 secs. The i tried a
windows xp cd, i loads and boots but
when the installation disc reaches about the Windows NT filesystem, AGAIN
dos screen with blinking cursor and pc is
crashed. I also tried a Windows server 2003 disc, boots to the point where
it says Windows is starting... And
nothing more... The i downloaded Ultimateboot cd from www.ultimatebootcd.com
and tried booting with that, i ran a
hdd test on surface, and it found a error about 4% in the drive, it
repaired. And i did some other test and after a
couple of attempts i got i to boot i was thrilled.. But then in windows i
took the chkdsk to get it to scan and
repair then windows had to reboot and after that same problem. Tried the
same thing with ultimatebootcd but didnt
work, then i formatted the drive, and did a surface/other test to the
hardisk from the ultimateboot cd/ and it
reports no errors from the hdd. When i try to install windows it does the
same, hangs after loading some
installation files. Really hope you somebody has a idea dont want to buy a
new laptop.
System information>
HP Pavilion ZV 6000
Product Number: EE986EA#ABY
BEfore format i had Windows XP home edition SP 2 installed.
BIOS Phoenix BIOS 1.71
I formatted the drive to FAT32
In one normal partition, and i have set the one partition to primary
In case you guys think i should flash the bios ive downloaded the correct
update some file *.*WPH but HP only
provide a windows Flash Utillity so if i have to flash how do i do from
boot, also dont want to brick my PC...
Any ideas _
Thx Nachen
windows the menu from windows with Failsafe
normal etc... and whatever i choose it just goes to dos screen with a
blinking cursor, and CTRl - ALT - Del doesnt
work anymore, and i have to hold the power button for 4 secs. The i tried a
windows xp cd, i loads and boots but
when the installation disc reaches about the Windows NT filesystem, AGAIN
dos screen with blinking cursor and pc is
crashed. I also tried a Windows server 2003 disc, boots to the point where
it says Windows is starting... And
nothing more... The i downloaded Ultimateboot cd from www.ultimatebootcd.com
and tried booting with that, i ran a
hdd test on surface, and it found a error about 4% in the drive, it
repaired. And i did some other test and after a
couple of attempts i got i to boot i was thrilled.. But then in windows i
took the chkdsk to get it to scan and
repair then windows had to reboot and after that same problem. Tried the
same thing with ultimatebootcd but didnt
work, then i formatted the drive, and did a surface/other test to the
hardisk from the ultimateboot cd/ and it
reports no errors from the hdd. When i try to install windows it does the
same, hangs after loading some
installation files. Really hope you somebody has a idea dont want to buy a
new laptop.
System information>
HP Pavilion ZV 6000
Product Number: EE986EA#ABY
BEfore format i had Windows XP home edition SP 2 installed.
BIOS Phoenix BIOS 1.71
I formatted the drive to FAT32
In one normal partition, and i have set the one partition to primary
In case you guys think i should flash the bios ive downloaded the correct
update some file *.*WPH but HP only
provide a windows Flash Utillity so if i have to flash how do i do from
boot, also dont want to brick my PC...
Any ideas _
Thx Nachen