Blue screen

M

Madams

Received the infamous blue screen error message below:

Stop: 0x0000008E (0x00000005, 0xBF803EB6, 0xF7AD37C4, 0x00000000)

Win32k.sys - Address BF803EB6 base at BF8000000, DateStamp 47 e0e106

However, I can't get any of the F8 commands to work.... I select Safe Mode
or Safe Mode with command promt...etc. but it always reverts back to the blue
screen. It would not be that hard to correct if I could get past the blue
screen. Any thoughts??? All the potential solutions resolve around getting
to the Safe Mode with command prompt but if I can't get there... out of luck.
Thanks.
 
N

nass

Madams said:
Received the infamous blue screen error message below:

Stop: 0x0000008E (0x00000005, 0xBF803EB6, 0xF7AD37C4, 0x00000000)

Win32k.sys - Address BF803EB6 base at BF8000000, DateStamp 47 e0e106

However, I can't get any of the F8 commands to work.... I select Safe Mode
or Safe Mode with command promt...etc. but it always reverts back to the blue
screen. It would not be that hard to correct if I could get past the blue
screen. Any thoughts??? All the potential solutions resolve around getting
to the Safe Mode with command prompt but if I can't get there... out of luck.
Thanks.

This error refer to bad RAM, bad driver for software installed or Bad
Grpahic card and also an infection!
Did you tried to Boot with Last good know configuration from the Boot options?
Try to test your RAMs and the hard drive health. If the procedure to much
for you you can take the machine to your local repair shop to fix it for you.
HTH
nass
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top