blue screen on first boot

[Guest]

Hello!
I have an IBM model :MT-M 8215-CTO, with chipset - Intel 945G. I need to
build an
X P embedded image for mass deployment. I imported the PMQ file and built
the image with no errors or warnings from the Target Designer. When I load
the image to the IBM pc, on the first boot I get a blue screen with an error
message – “stop 0x000007Bâ€. I googled it and got the kb -
http://support.microsoft.com/default.aspx?scid=kb;en-us;324103.
Also found that the Intel 82801 (ICH7) SATA controller might be the problem.
In http://www.911cd.net/forums//index.php?showtopic=16866 it relates to
Norton Ghost although I thought it might be related.
Appreciate the help.
Itay

 

[Heidi Linda]

Hello!
I have an IBM model :MT-M 8215-CTO, with chipset - Intel 945G. I need to
build an
X P embedded image for mass deployment. I imported the PMQ file and built
the image with no errors or warnings from the Target Designer. When I load
the image to the IBM pc, on the first boot I get a blue screen with an error
message – “stop 0x000007Bâ€.

Whn you imported the PMQ, what drivers did it not find? It sounds like
you might need to componentise a hard disk controller.

 

[Guest]

I imported it into the component designer, then imported it as an SLD file to
the image. It went through clear with no errors. Although you might be right
regarding the SATA controller component. I have no idea how to fine the drive
that will suit the XP Embedded.

 

[Sean Liming \(eMVP\)]

You might have a missing component. There is a Stop 0x7B article
specifically for XP Embedded that can be found here:
http://www.seanliming.com/Docs/XPE Stop 0x0000007B Error V1.2.pdf

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
XP Embedded Book Author - XP Embedded Advanced, XP Embedded Supplemental
Toolkit

 

[Adora Belle Dearheart]

I imported it into the component designer, then imported it as an SLD file to
the image. It went through clear with no errors. Although you might be right
regarding the SATA controller component. I have no idea how to fine the drive
that will suit the XP Embedded.

When you imported the pmq into target designer, it didn't mention any
devices that drivers could not be found for? That's very unusual.

 

[Guest]

To Sean!
Thanks for the link, the TAP.exe solved the problem. I imported the new PMQ
to the image and the image went up fine.

Thanks again
Itay,