Not able to create image, warning:1116

  • Thread starter Thread starter Dipesh_Sharma
  • Start date Start date
D

Dipesh_Sharma

Hi All,
I was creating image for VXL thin client system and started getting problems
at each step. When i imported the PMQ file for SLD file, it gave warnings
like:
Warning:Could not find a driver for Realtek High Definition Audio
(HDAUDIO\FUNC_01&VEN_10EC&DEV_0662&SUBSYS_10192178&REV_1001).
Warning:Could not find a driver for Mobile Intel(R) 945 Express Chipset
Family (PCI\VEN_8086&DEV_27A6&SUBSYS_21781019&REV_03).
Warning:Could not find a driver for Windows RAM Disk Device (volume)
(Ramdisk\RamVolume).
Warning:Could not find a driver for Generic volume (STORAGE\Volume).
Warning:Could not find a driver for SCR33x USB Smart Card Reader
(USB\Vid_04e6&Pid_5115&Rev_0416).
Warning:Could not find a driver for 802.11n USB Wireless LAN Card
(USB\Vid_148f&Pid_2870&Rev_0101).

I ignored them as i can add drivers later on also. I imported it into
database, and created SLX configuration file. On building the image, i again
got few warnings related to Intel components:
R: Warning 1116: Building unreleased component: "Intel(R) 82801G (ICH7
Family) PCI Express Root Port - 27D0 [Version 8.6.1.1002, R3]"
R: Building: "Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA [Version
8.6.1.1002, R3]"...
R: Warning 1116: Building unreleased component: "Intel(R) 82801GBM/GHM
(ICH7-M Family) Serial ATA Storage Controller - 27C4 [Version 8.2.0.1011, R3]"
and few more related to Intel 82801 only.

I read somewhere there these warnings dont affect functionality, so i copied
all files on my device and started booting for FBA, but it gave BSOD
0x0000007B error. Now i am not able to boot my device, please help out of web
of warnings. Are they the culprit for not booting my image, or where could be
the error?

With Regards,
Dipesh
 
My device has SATA drive and i ran TAP.exe on preinstalled WinXPe image on
device. The BSOD 0x000007B says: Check for viruses on your computer. Remove
any newly installed hard drives or hard drive controller. I also added
components from Sean lining's white paper for this error but to no help.
Please help me you guys..
 
Stop 7B has to do with a missing critical boot device -
http://www.seanliming.com/Docs/Articles/XPE Stop 0x0000007B Error_FINAL_v2.pdf

Since you are using AHCI, you will have to create a driver component for the
AHCI driver.

Here are a couple of videos that show how to create driver components:

http://www.sjjmicro.com/Video_Driver_Component.html
http://www.sjjmicro.com/Video_INF_Import_Issues.html

Otherwise, you can go into the BIOS and change teh AHCI to compatibility
mode if available.

-Sean


Dipesh_Sharma said:
My device has SATA drive and i ran TAP.exe on preinstalled WinXPe image on
device. The BSOD 0x000007B says: Check for viruses on your computer. Remove
any newly installed hard drives or hard drive controller. I also added
components from Sean lining's white paper for this error but to no help.
Please help me you guys..

Dipesh_Sharma said:
Hi All,
I was creating image for VXL thin client system and started getting problems
at each step. When i imported the PMQ file for SLD file, it gave warnings
like:
Warning:Could not find a driver for Realtek High Definition Audio
(HDAUDIO\FUNC_01&VEN_10EC&DEV_0662&SUBSYS_10192178&REV_1001).
Warning:Could not find a driver for Mobile Intel(R) 945 Express Chipset
Family (PCI\VEN_8086&DEV_27A6&SUBSYS_21781019&REV_03).
Warning:Could not find a driver for Windows RAM Disk Device (volume)
(Ramdisk\RamVolume).
Warning:Could not find a driver for Generic volume (STORAGE\Volume).
Warning:Could not find a driver for SCR33x USB Smart Card Reader
(USB\Vid_04e6&Pid_5115&Rev_0416).
Warning:Could not find a driver for 802.11n USB Wireless LAN Card
(USB\Vid_148f&Pid_2870&Rev_0101).

I ignored them as i can add drivers later on also. I imported it into
database, and created SLX configuration file. On building the image, i again
got few warnings related to Intel components:
R: Warning 1116: Building unreleased component: "Intel(R) 82801G (ICH7
Family) PCI Express Root Port - 27D0 [Version 8.6.1.1002, R3]"
R: Building: "Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA [Version
8.6.1.1002, R3]"...
R: Warning 1116: Building unreleased component: "Intel(R) 82801GBM/GHM
(ICH7-M Family) Serial ATA Storage Controller - 27C4 [Version 8.2.0.1011, R3]"
and few more related to Intel 82801 only.

I read somewhere there these warnings dont affect functionality, so i copied
all files on my device and started booting for FBA, but it gave BSOD
0x0000007B error. Now i am not able to boot my device, please help out of web
of warnings. Are they the culprit for not booting my image, or where could be
the error?

With Regards,
Dipesh
Click to expand...
Click to expand...
 
Back
Top