Audigy ieee 1394 not recognising camera

G

Guest

I have a brand new canon ZR-80 camera that when connected to a SB Audigy ZS firewire port, is not recognised. Device Manager shows that the IEEE 1394 bus controller is functioning properly, however any video software states that no digital camcorder is attached to the system. Given that Windows XP doesn't necessarily state when a camera is attached (the system appears to detect the camera being powered on as the mouse pointer does a quick animation). I've tried two Firewire cables (they are 4-pin to 6-pin), but same story

I've checked BIOS for any disabled settings, but everything is fine

Any ideas??
 
G

Guest

Are you sure that it is compatable? From what I remeber creative decided it would be a good idea to use a slighlty different specification of firewire than the standard.
 
G

Guest

Check with Creative.
Heres there number...closed Weekends.
405-742-665
They are the best to answer this we would be shooting in the dark.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

IEEE 1394 port is driving me nuts 3
VIA OHCI Compliant IEEE 1394 5
IEEE 1394 4
Microsoft XP recognising Sony DV camera as "1394 Net Adapter" 3
IEEE 1394 Camera Detection Problem 11
Sony DV camcorder not recognised 7
IEEE 1394 Capture - camera not detected 0
Not recognising camera through 1394 card 1

Top