Assign a drive letter to a flash disk reader

B

Bobby

I have installed a solid state disk reader on my Windows
2000 box and I would like to assign it a drive letter.
Windows only sees the PCI card that connect the device via
a 15 pin serial cable. Is there a way to assign a drive
letter to the flash card reader?

The drivers came with a utility that allows you to access
the card by running NSSD.exe along with the appropriate
command line switches. I was thinking there was a way to
set it in the environmental variables. Please help me
with any advice you may have.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Assigning a drive letter to an Solid State Drive 1
USB 2.0 All-in-1 card reader can't switch cards without unplugging 8
XP fails to assign drive letter to USB Card Reader 3
Reset assigned drive letters to USB drives 1
Assigning drive letters by XP Home edition 2
Ensure boot drive assigned C: drive letter 6
problem with flash memory card reader 12
Reserve drive letters for USB flash drives/card readers 2

Top