Asrock K7S8X usb 2.0

  • Thread starter Tupac Resserection
  • Start date

T

Tupac Resserection

Hey, Just a few questions, I have a Asrock k7s8x which has six usb 2.0 ports
including the two from the mobo header, Will I get usb 2.0 through the
header?

This is a sissandra report, it says there are 3 controllers, what are
these?.


SiSoftware Sandra

System
Manufacturer : American Megatrends Inc.
Model : Uknown
Version : 1.0
Serial Number : 00000000
ID : FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF

System Chassis
Manufacturer : Uknown Chassis Manufacture
Type : Desktop
Can be locked : No
Version : Version 1.00
Serial Number : 123456890
Asset Tag : 0123ABC

Mainboard
MP Support : 1 CPU(s)
MPS Version : 1.10
Model : K7S8X.
Version : 3.0
Serial Number : 00000000

Memory Controller
Error Detection Method : ECC
Error Correction Capability : 1-bit
Supported/Current Memory Interleave : 1-way / 1-way
Number of Memory Slots : 3
Maximum Installable Memory : 384MB
Maximum Module Size : 128MB
Supported STD/FPM/(B)EDO Speeds : 70ns, 60ns
Supported Memory Types : STD, FPM, EDO, Parity, ECC, SIMM
Supported Memory Voltages : +3.3V

Physical/BIOS Memory Banks
ROW-0 (RASL-6 RASL-6) : 128MB DIMM SDRAM double-bank
ROW-1 (RASL-6 RASL-6) : 128MB DIMM SDRAM double-bank
ROW-2 : Empty

Chipset 1
Model : ASRock Inc SiS746 CPU to PCI Bridge
Bus(es) : ISA AGP PCI USB i2c/SMBus
Front Side Bus Speed : 2x 167MHz (334MHz data rate)
Maximum FSB Speed / Max Memory Speed : 2x 133MHz / 2x 200MHz
Width : 64-bit
IO Queue Depth : 7 request(s)

Chipset 1 Hub Interface
Type : MUTOL
Width : 16-bit
Full Duplex : No
Multiplier : 1/1x

Logical/Chipset 1 Memory Banks
Bank 0 : 128MB DDR-SDRAM 2.5-3-3-6CL
Bank 1 : 128MB DDR-SDRAM 2.5-3-3-6CL
Speed : 2x 133MHz (266MHz data rate)
Multiplier : 4/5x
Width : 64-bit
Refresh Rate : 7.80µs
Power Save Mode : No
Fixed Hole Present : No

Memory Module(s)
Memory Module 1 : 00FFFFFF 128MB 16x(8Mx8) DDR-SDRAM PC2100U-2533-750 (CL2.5
up to 133MHz) (CL2 up to 100MHz)
Memory Module 2 : 00FFFFFF 128MB 16x(8Mx8) DDR-SDRAM PC2100U-2533-750 (CL2.5
up to 133MHz) (CL2 up to 100MHz)

Environment Monitor 1
Model : Winbond W83697HF ISA
Version : 6.00
Mainboard Specific Support : No

Temperature Sensor(s)
Board Temperature : 43.0°C / 109.4°F
CPU Temperature : 34.5°C / 94.1°F

Cooling Device(s)
Auto Fan Speed Control : No
CPU Fan Speed : 2576rpm

Voltage Sensor(s)
CPU Voltage : 1.66V
+3.3V Voltage : 3.26V
+5V Voltage : 4.97V
+12V Voltage : 11.67V
-12V Voltage : 0.88V
-5V Voltage : 1.94V
Standby Voltage : 4.92V

AGP Bus(es) on Hub 1
Version : 3.00
Speed : 8x
Fast-Writes Enabled : Yes
Isochronous Mode Enabled : No
Addressing Enabled : 32-bit
Aperture Size : 128MB

PCI Bus(es) on Hub 1
Version : 2.20
Number of Bridges : 1
PCI Bus 0 : PCI (1x PCIClk)

LPC Hub Controller 1
Model : Silicon Integrated Systems (SiS) SiS PCI to ISA Bridge (LPC Bridge)
ACPI Power Management Enabled : Yes
Random Number Generator Enabled : No
Speed : 7MHz

USB Controller 1
Model : ASRock Inc SiS5597/8 Universal Serial Bus Controller
Version : 1.00
Interface : OHCI
Channels : 3
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 2
Model : ASRock Inc SiS5597/8 Universal Serial Bus Controller
Version : 1.00
Interface : OHCI
Channels : 3
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No

USB Controller 3
Model : ASRock Inc SiS7002 USB 2.0 Enhanced Controller
Version : 2.00
Specification : 1.00
Interface : EHCI
Channels : 6
Companion Controllers : 2
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) High (480Mbps)
Addressing Support : 32-bit
Legacy Emulation Enabled : No

System SMBus Controller 1
Model : SiS 961 Ext SMBus
Slave Device Enabled : No
Speed : 56kHz

Expansion Slot(s)
PCI1 (1h) : PCI 32-bit +3.3V Shared PME Full-Length Available (Silicon
Integrated Systems (SiS) SiS86C6262 GUI Accelerator)
PCI2 (2h) : PCI 32-bit +3.3V Shared PME Full-Length Used (Silicon Integrated
Systems (SiS) SiS PCI to ISA Bridge (LPC Bridge))

Performance Tips
Tip 2530 : MPS 1.4 or later is recommended for MP systems. Check BIOS
version.
Notice 224 : SMBIOS/DMI information may be inaccurate.
Tip 2511 : Some memory slots are free so the memory can be easily upgraded.
Warning 2541 : FSB exceeds Chipset rated speed. Reduce FSB.
Tip 2 : Double-click tip or press Enter while a tip is selected for more
information about the tip.


TIA
Ellis
 
Ad

Advertisements


Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top