With a Tbred B 2100+ set to 10.5 multiplier, and PC3700 ram set at 166MHz,
I had the FSB up to 215MHz. This was with the bios setting and the FSB
jumper at 133. There is a 200MHz (They now call it 400 in newer manuals)
jumper setting on the board. It's a good board, but if buying today, I'd
get the XE R30 or XE+.
Oh. I think the bios goes up to about 250MHz, but of course you know it
won't work at the max settings.
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.
