Antec P160 warning

[Skjoldmø]

To anyone who buys Antec P160
Check that your case has USB cables and a 10 pin speaker-microphone
connector from the front bezel. The P160 I bought did not, and the one I
got in exchange had the exact same defects.

Regards Skjoldmø

 

[Ed_]

To anyone who buys Antec P160
Check that your case has USB cables and a 10 pin speaker-microphone
connector from the front bezel. The P160 I bought did not, and the one I
got in exchange had the exact same defects.

Regards Skjoldmø

I built a SuperLanboy back in December and the case was missing the speaker but
did have the usb. I'm betting there's more of us.

Antec had some problems getting these cases on the market. The P-160 was
delayed a month if I remember right. Did you contact them? I didn't bother, it
wasn't a problem for me.

 

[Roy Coorne]

Ed_ wrote:
....

I built a SuperLanboy back in December and the case was missing the speaker but
did have the usb. I'm betting there's more of us.

....

That's right: I built two Chenbro Gaming Case (PC-61166) machines and
both cases lacked both the system speaker and the reset switch - which
was mentioned neither on Chenbro's web site nor in the many reviews...

Roy

 

[Skjoldmø]

I built a SuperLanboy back in December and the case was missing the speaker but
did have the usb. I'm betting there's more of us.

Antec had some problems getting these cases on the market. The P-160 was
delayed a month if I remember right. Did you contact them? I didn't bother, it
wasn't a problem for me.

I contacted them, and their customer service is good, they will exchange the
front bezel and pay the shipping charges.

Skjoldmø

 

[podo]

I contacted them, and their customer service is good, they will exchange the
front bezel and pay the shipping charges.

Skjoldmø

I called them about this, too. Manual mentions "Intel-standard"
10-pin connector (for front audio) with 7 additional wires and connectors.
I did get a usb connector but no fp audio 10-pin. Customer service said
that they don't supply the 10-pin because of the variety of board connections,
and that the manual was misprinted or needs updating or some such thing.
I only have the "7 additional connectors" on my P160. Skjold, did you get
a 10-pin with your new bezel?
Did I get the wrong customer service guy?
Pete

 

[podo]

I contacted them, and their customer service is good, they will exchange the
front bezel and pay the shipping charges.

Skjoldmø

I called them about this, too. Manual mentions "Intel-standard"
10-pin connector (for front audio) with 7 additional wires and connectors.
I did get a usb connector but no fp audio 10-pin. Customer service said
that they don't supply the 10-pin because of the variety of board connections,
and that the manual was misprinted or needs updating or some such thing.
I only have the "7 additional connectors" on my P160. Skjold, did you get
a 10-pin with your new bezel?
Did I get the wrong customer service guy?
Pete