10 to 15mins time to enter Domain....

[Guest]

Hi all,
I had created a image and deployed with CF to Target Machine..
Now as i connected my machine in workgroup it boots up quickly.
But if i enter in our domain and boot the machine it took almost 10 to
15mins to open explorer Shell, if it would have happened for only the 1st
time than i would have understood but everytime it takes 10mins atleast to
boot to explorer shell. Why so..Can any one suggest me solution.
Above all when i use some images on DOM's than only 1st time it takes time
of about 10-15mins. but the next time it boots quickly.
Most of the time the Window shows the message box..."Applying your personal
Setting"
-- Plz Help...

Amit S. Kadam
India

 

[Guest]

Hi,

I also faced the same problem, you can check with the following registries:
HKEY_USERS\S-1-5-19\Control Panel\Desktop
MUILanguagePending = 00000409
MultiUILanguageId = 00000409
HKEY_USERS\S-1-5-20\Control Panel\Desktop
MUILanguagePending = 00000409
MultiUILanguageId = 00000409

I hope this will solve ur problem.

Rachna
India

 

[mconti65]

AmitK ha scritto:

Hi all,
I had created a image and deployed with CF to Target Machine..
Now as i connected my machine in workgroup it boots up quickly.
But if i enter in our domain and boot the machine it took almost 10 to
15mins to open explorer Shell, if it would have happened for only the 1st

Try to configure, on the client machine, a correct DNS (the IP address
of Domain Controller).
The problem is there!!