View Full Map for Network Map

[Guest]

I had this same problem and the issue was caused by nvidia Ethernet Driver.
I had installed the latest Nvidia Ethernet Driver (65.55) and as a result
Vista was not able to draw the network. I rolled back to the driver Vista
installed originally and all was again fine. I can draw the full network
map. just fine.

Hope this works for you

 

[Rafa Fitt]

I had this same problem and the issue was caused by nvidia Ethernet Driver.
I had installed the latest Nvidia Ethernet Driver (65.55) and as a result
Vista was not able to draw the network. I rolled back to the driver Vista
installed originally and all was again fine. I can draw the full network
map. just fine.

I changed "Priority & VLAN" (it is on the Advanced tab of the "nForce
Networking Controller Properties") to "Priority & VLAN disabled"
and ... voila! I can still use driver 65.55 and I have the network
map

 

[Guest]

Rafa...Thanks very much for posting back with a solution.

Have you noticed any other effects from disabling "Priority & VLAN"?

I'll try it on my Vista machine and see how it works.

Thanks again for the feedback

 

[Chris Blunt]

I changed "Priority & VLAN" (it is on the Advanced tab of the "nForce
Networking Controller Properties") to "Priority & VLAN disabled"
and ... voila! I can still use driver 65.55 and I have the network
map

I have driver 65.5.5.0 and just changed that setting you suggested.
Now when I try to draw a network map I get the message:

"Network mapping is disabled by default on domain networks. Your
network administrator can use Group Policy to enable mapping."

Chris

 

[Robert L. \(MS-MVP\)]

Thank you for sharing your experience with us.

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com