D
Douglass
The recording function on my PC is not recording sounds
through the microphone.
The microphone is working.
The sound card is working.
The problem has occured before and a microsoft certified
dealer reinstalled the recording devices.
I would like to fix this problem myself.
These are the additional messages/issues experienced:
Through the control panel, the Sounds and Audio Devices
Properties application is launched. Choosing the Voice
tab, the Test hardware... button is selected.
After going through a timed diagnostic, two alert
windows are displayed:
1st. "An error occurred during DirectPlay Voice setup.
The error code is 0x8004005."
2nd. "Windows cannot execute DpvSetup.exe, use Add/Remove
Programs control panel to install."
There is no obvious method of installing this component
through the 'Change or Remove Programs' button or
with 'Add/Remove Windows Components'
I did find a Microsoft article on their Support &
Troubleshooting page when I did a search on the
phrase 'dpvsetup.exe':
282882 - Error Message: Windows Cannot Execute
DPVSetup.exe, Use Add/Remove Programs Control Panel to
Install
This was exactly the error message I received but when I
tried the fix suggested in the article, (i.e., the
correction), I went into the Sounds and Audio Devices
Properties, chose the voice tab and hit the Advanced
button under Voice Playback which opens an Advanced Audio
Properties window. The article recommends: "On the
Performance tab, move the Hardware Acceleration slider at
least one position to the right."
My tab is already as far right as it can go.
Any Suggestions?
Thanx in advance,
-Douglass
through the microphone.
The microphone is working.
The sound card is working.
The problem has occured before and a microsoft certified
dealer reinstalled the recording devices.
I would like to fix this problem myself.
These are the additional messages/issues experienced:
Through the control panel, the Sounds and Audio Devices
Properties application is launched. Choosing the Voice
tab, the Test hardware... button is selected.
After going through a timed diagnostic, two alert
windows are displayed:
1st. "An error occurred during DirectPlay Voice setup.
The error code is 0x8004005."
2nd. "Windows cannot execute DpvSetup.exe, use Add/Remove
Programs control panel to install."
There is no obvious method of installing this component
through the 'Change or Remove Programs' button or
with 'Add/Remove Windows Components'
I did find a Microsoft article on their Support &
Troubleshooting page when I did a search on the
phrase 'dpvsetup.exe':
282882 - Error Message: Windows Cannot Execute
DPVSetup.exe, Use Add/Remove Programs Control Panel to
Install
This was exactly the error message I received but when I
tried the fix suggested in the article, (i.e., the
correction), I went into the Sounds and Audio Devices
Properties, chose the voice tab and hit the Advanced
button under Voice Playback which opens an Advanced Audio
Properties window. The article recommends: "On the
Performance tab, move the Hardware Acceleration slider at
least one position to the right."
My tab is already as far right as it can go.
Any Suggestions?
Thanx in advance,
-Douglass