G
Guest
The microphone is working.
The sound card is working.
The problem has occured before and a microsoft certified
dealer reinstalled the recording devices.
I would like to fix this problem myself.
These are the additional messages/issues experienced:
Through the control panel, the Sounds and Audio Devices
Properties application is launched. Choosing the Voice
tab, the Test hardware... button is selected.
After going through a timed diagnostic, two alert
windows are displayed:
1st. "An error occurred during DirectPlay Voice setup.
The error code is 0x8004005."
2nd. "Windows cannot execute DpvSetup.exe, use
Add/Remove
Programs control panel to install."
There is no obvious method of installing this component
through the 'Change or Remove Programs' button or
with 'Add/Remove Windows Components'
I did find a Microsoft article on their Support &
Troubleshooting page when I did a search on the
phrase 'dpvsetup.exe':
282882 - Error Message: Windows Cannot Execute
DPVSetup.exe, Use Add/Remove Programs Control Panel to
Install
This was exactly the error message I received but when I
tried the fix suggested in the article, (i.e., the
correction), I went into the Sounds and Audio Devices
Properties, chose the voice tab and hit the Advanced
button under Voice Playback which opens an Advanced
Audio
Properties window. The article recommends: "On the
Performance tab, move the Hardware Acceleration slider
at
least one position to the right."
My tab is already as far right as it can go.
I have updated the directx to 9.1
Any Suggestions?
The sound card is working.
The problem has occured before and a microsoft certified
dealer reinstalled the recording devices.
I would like to fix this problem myself.
These are the additional messages/issues experienced:
Through the control panel, the Sounds and Audio Devices
Properties application is launched. Choosing the Voice
tab, the Test hardware... button is selected.
After going through a timed diagnostic, two alert
windows are displayed:
1st. "An error occurred during DirectPlay Voice setup.
The error code is 0x8004005."
2nd. "Windows cannot execute DpvSetup.exe, use
Add/Remove
Programs control panel to install."
There is no obvious method of installing this component
through the 'Change or Remove Programs' button or
with 'Add/Remove Windows Components'
I did find a Microsoft article on their Support &
Troubleshooting page when I did a search on the
phrase 'dpvsetup.exe':
282882 - Error Message: Windows Cannot Execute
DPVSetup.exe, Use Add/Remove Programs Control Panel to
Install
This was exactly the error message I received but when I
tried the fix suggested in the article, (i.e., the
correction), I went into the Sounds and Audio Devices
Properties, chose the voice tab and hit the Advanced
button under Voice Playback which opens an Advanced
Audio
Properties window. The article recommends: "On the
Performance tab, move the Hardware Acceleration slider
at
least one position to the right."
My tab is already as far right as it can go.
I have updated the directx to 9.1
Any Suggestions?