HELP with P4T533-C Installation

[Don Mahony]

I was about to install a new P4T533-C motherboard to replace a ASUS
CUSL2-C board. Reading the manual it says the new board requires three
power connections: 20 pin ATXPWR, a 4 pin 12V EZ_PLUG, and a 4 pin AUX
12V.

The power supply I have does not have the small four pin 12V connector
available.

Is it necessary to have both the four pin connectors or can I just use
one of the ones for the peripheral devices ie. the white EZ_PLUG?

The other question I guess I would have is if both the connections are
necessary is there a standard adapter or connector that would run from
the EZ_PLUG to the square four pin connector that I should be able to
find at a computer store?

Many thanks,

Don

 

[Sharky]

No, it requires only two connections.
The 20 pin ATXpower ofcorse and one of the two others
The 4 pin 12V EZ-plug is for those ones that doesn't have the 4 pin aux.

 

[Don Mahony]

Thanks Sharky! I was just about to do that so it is good to get your
confirmation of same.

Thanks,

Don