XP wireless setup

  • Thread starter Thread starter gregf
  • Start date Start date
G

gregf

I'm trying to set up a wireless AP for a friend. A D-link AP, connected
to a Actiontec DSL modem. The Actiontec says it's using PPPoA. The AP
has no such option, so I used Static IP settings, using the same
addresses set up on the Modem, gateway, DNS, etc. I've turned off the
AP DHCP since the modem has this already.
So, the laptop can find the AP and has a strong signal, the PC can
connect to the internet, but the laptop can't connect to the interent.
I know this is a basic general question, but what could I be missing?
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

How do I convert my second Router into an Access Point 0
How do I convert my second Router into an Access Point 1
How do I convert my second Router into an Access Point 0
Certain routers and switches are not accessible through VPN. 0
Wi-fi failed connection 6
describe your home network setup 4
Vista Wireless and mac filtering 2
Internet Explorer Disabling Wireless ??! 1

Back
Top