XP Reinstall to fix corrupt files

[Guest]

I tried to reinstall windows XP Professional to fix some corrupt files, and I get a message stating something about insufficient resources and it goes into a loop to restart setup. I don't want to wipe the drive and start over. Any ideas?

 

[Carey Frisch [MVP]]

The Windows XP CD is bootable and contains all the tools necessary
to partition and format your drive. Follow this procedure and allow
Windows XP to partition and format your drive:

NOTE: It would be best to physically disconnect all your peripheral hardware
devices, except the monitor, mouse and keyboard, before installing XP.

NOTE: If you have an internal Zip Drive installed, physically disconnect the
EIDE and power cable to it before proceeding, otherwise your main
hard drive may not be assigned the customary C: drive letter.
After installing Windows XP, you may then reconnect it.

1. Open your BIOS and set your "CD Drive as the first bootable device".

===> Accessing Motherboard BIOS
===> http://www.michaelstevenstech.com/bios_manufacturer.htm

2. Insert your Windows XP CD in the CD Drive and reboot your computer.
3. You'll see a message to boot to the CD....follow the instructions.
4. The setup menu will appear and you should elect to delete all the existing
Windows partitions, then create a new partition, then format the primary
partition (preferably NTFS) and proceed to install Windows XP.

5. Clean Install Windows XP
http://michaelstevenstech.com/cleanxpinstall.html

[Courtesy of Michael Stevens, MS-MVP]

6. ==> Immediately after installing Windows XP, turn on XP's Firewall.
==> http://www.microsoft.com/security/protect/

7. After Windows XP is installed, visit the Windows Update website
and download the available "Critical Updates".

8. After installing the critical updates, be sure and visit the support website
of the manufacturer of the computer to download and install any
available Windows XP compatible drivers, such as video adapter
and audio drivers.

9. If you happen to run into any installation difficulties, use the following resources:

How to Troubleshoot Windows XP Problems During Installation
http://support.microsoft.com/default.aspx?scid=kb;EN-US;310064

Troubleshooting Windows XP Setup
http://www.kellys-korner-xp.com/xp_setup.htm

[Courtesy of MS-MVP Kelly Theriot]

--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User

Be Smart! Protect your PC!
http://www.microsoft.com/security/protect/

------------------------------------------------------------------------------------------------------------


| I tried to reinstall windows XP Professional to fix some corrupt files, and I get a message stating
something about insufficient resources and it goes into a loop to restart setup. I don't want to wipe the
drive and start over. Any ideas?

 

[Dennis]

yeah i am having the same problem with the recovery
installation looping. Carey Frisch's advice wasn't much
help since i don't want to do a clean installation unless
i am 100 percent sure that it is the only option. Is it?

-----Original Message-----
The Windows XP CD is bootable and contains all the tools necessary
to partition and format your drive. Follow this procedure and allow
Windows XP to partition and format your drive:

NOTE: It would be best to physically disconnect all your peripheral hardware
devices, except the monitor, mouse and

keyboard, before installing XP.

NOTE: If you have an internal Zip Drive installed, physically disconnect the
EIDE and power cable to it before

proceeding, otherwise your main

hard drive may not be assigned the customary C: drive letter.
After installing Windows XP, you may then reconnect it.

1. Open your BIOS and set your "CD Drive as the first bootable device".

===> Accessing Motherboard BIOS
===> http://www.michaelstevenstech.com/bios_manufacturer.htm

2. Insert your Windows XP CD in the CD Drive and reboot your computer.
3. You'll see a message to boot to the CD....follow the instructions.
4. The setup menu will appear and you should elect to delete all the existing
Windows partitions, then create a new partition, then format the primary
partition (preferably NTFS) and proceed to install Windows XP.

5. Clean Install Windows XP
http://michaelstevenstech.com/cleanxpinstall.html

[Courtesy of Michael Stevens, MS-MVP]

6. ==> Immediately after installing Windows XP, turn on XP's Firewall.
==> http://www.microsoft.com/security/protect/

7. After Windows XP is installed, visit the Windows Update website
and download the available "Critical Updates".

8. After installing the critical updates, be sure and visit the support website
of the manufacturer of the computer to download and install any
available Windows XP compatible drivers, such as video adapter
and audio drivers.

9. If you happen to run into any installation

difficulties, use the following resources:

How to Troubleshoot Windows XP Problems During Installation

http://support.microsoft.com/default.aspx?

scid=kb;EN-US;310064

Troubleshooting Windows XP Setup
http://www.kellys-korner-xp.com/xp_setup.htm

[Courtesy of MS-MVP Kelly Theriot]

--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User

Be Smart! Protect your PC!
http://www.microsoft.com/security/protect/

---------------------------------------------------------- --------------------------------------------------

news:35C65204-5B6A-437E-A9BB-

(e-mail address removed)...

| I tried to reinstall windows XP Professional to fix

some corrupt files, and I get a message stating

something about insufficient resources and it goes into a

loop to restart setup. I don't want to wipe the

 

[Guest]

Good advice if I wanted to start again, but there are files on my drive I do not want to lose. I installed a spare hard drive and set it up on XP, and made my original drive the secondary master. I can see the folders I need when I explore the drive, but the folders are User folders set up on the original install of XP and have privacy protection on them and keep giving me the "access denied" message when I attempt to copy them to my "new" primary master. What now?