XP Pro VPN connection

G

Guest

I am trying to establish a VPN connection to a remote network. The computer
that will be receiving the incoming VPN call is a tower running windows XP
Pro. When I am within the network I can make the VPN connection, using the IP
address of the tower. But when I try a remote access, using the WAN Ip
address of the router I get no response. I have configured this router to
redirect incoming calls to the Tower's IP address and I have temporarily
disabled the Tower's firewall to rule that out. What I haven't done is get a
static Ip address, apparently comcast doesn't offer them to residential
customers. Can this be done with a dynamic address? If anyone has any
suggestions I would appreciate it.

Thank you,

Dan

The model router is: D-link DI-604
Virtual server settings: PPTP TCP 1723/1723
 
R

Robert L [MVP - Networking]

DDNS is your option. I have been using dyndns.org and it works OK.

DDNSWhat's DDNS ERROR: Remote Security Gateway domain name problem I have an account with dyndns but get "block for abuse" My DDNS log lists error "nohost" ...
www.chicagotech.net/ddns.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com

I am trying to establish a VPN connection to a remote network. The computer
that will be receiving the incoming VPN call is a tower running windows XP
Pro. When I am within the network I can make the VPN connection, using the IP
address of the tower. But when I try a remote access, using the WAN Ip
address of the router I get no response. I have configured this router to
redirect incoming calls to the Tower's IP address and I have temporarily
disabled the Tower's firewall to rule that out. What I haven't done is get a
static Ip address, apparently comcast doesn't offer them to residential
customers. Can this be done with a dynamic address? If anyone has any
suggestions I would appreciate it.

Thank you,

Dan

The model router is: D-link DI-604
Virtual server settings: PPTP TCP 1723/1723
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top