XP Pro installation hangs with blue screen when loading drivers

[Guest]

I am trying to install Windows XP Pro on a P4D 3.0 GHz, 1GB RAM, ASUS P5LD2
mainboard, WD 200GB HDD and when the installation tries to load the drivers
(the green progress bar occurs for the first time), the system hangs with
blue screen 0x000000C4. The error parameters are 0x60, 0x0, 0x2C and 0x1.

I already tried to remove all unnecessary hardware (WLAN) and disabled the
onboard soundcard in the BIOS, but it did not help. Currently, I am running a
memory test, but it takes some time ...

Any other solutions for the problem? I know that the error code indicates
that a driver does not free all memory, but this information does not help ...

 

[Guest]

I already tried to remove all unnecessary hardware (WLAN) and disabled the
onboard soundcard in the BIOS, but it did not help. Currently, I am running a
memory test, but it takes some time ...

The memory test just finished a third pass, so I assume the RAM is OK.

 

[Guest]

I solved the problem now by plugging the DVD drive and the primary HDD to the
blue primary IDE instead of the red primary EIDE below the southbridge.